Subsea Inspector - FOC / Flying Leads / Flanges / SSIV Valve

Hill International, Inc.; Milano; In loco; EUR 40.000 - 70.000; Tempo pieno

Descrizione del lavoro

A global construction management firm is seeking a Subsea Inspector to ensure compliance with project specifications and carry out inspections of subsea hardware, including fiber optic cables and valves. The candidate should have at least 5 years of subsea inspection experience and hold relevant engineering qualifications. This full-time position emphasizes technical competence in both inspection and compliance, contributing to successful offshore operations.

Competenze

• 5 years minimum experience in subsea/offshore inspection for FOC, flying leads, SSIVs, and subsea hardware.
• NDT certifications (CSWIP/PCN/ASNT) preferred.
• Experience in FAT/EFAT/SIT and offshore readiness preparation.

Mansioni

• Implement ITPs for FOC, flying leads, bottom flanges, and SSIVs.
• Conduct hold-point, witness-point, and surveillance inspections.
• Prepare inspection reports, NCRs, and punch lists.
• Coordinate with subsea engineering, quality teams, vendors, fabrication yards, and installation contractors.

Conoscenze

Knowledge of subsea hardware: FOC, flying leads, SSIVs, hubs, connectors

Skilled in fiber optic testing (OTDR)

Hydraulic and electrical testing

Understanding of NDT standards (VT, PT, MT, UT)

Familiarity with API 17E/F/D, API 6A, DNV, ISO 13628

Formazione

Degree/diploma in Mechanical, Electrical, Instrumentation, or Quality Engineering

Descrizione del lavoro

Subsea Inspector - FOC / Flying Leads / Flanges / SSIV Valve (ITP Scope)

Location: Italy

Hill International provides program, project, and construction management services for clients in a range of sectors undertaking major construction projects across the world. Our services include cost engineering and estimating, quality assurance, inspection, scheduling, risk management, and claims avoidance. For more information on Hill, please visit our website at www.hillintl.com.

ITP Compliance & Quality Surveillance

• Implement ITPs for FOC, flying leads, bottom flanges, and SSIVs.
• Conduct hold-point, witness-point, and surveillance inspections.
• Verify compliance with project specifications and vendor procedures.

FOC (Fiber Optic Cable) Inspection

• Inspect fiber continuity, attenuation, and OTDR test results.
• Verify armoring, sheathing, and bend radius integrity.
• Witness terminations, splicing, sealing, and pressure tests.

Flying Leads Inspection (Electrical & Hydraulic)

• Inspect fabrication of EFL/HFL components.
• Verify connectors, insulation resistance, continuity, tube cleanliness, and pressure tests.
• Review FAT documentation for electrical and hydraulic performance.

Bottom Flanges & Connector Inspection

• Inspect fabrication and machining of flanges, hubs, and subsea connectors.
• Review dimensional checks, NDT results (VT, PT, UT, MT), coating, and corrosion protection.
• Confirm pressure rating, seal profile accuracy, and material traceability.

SSIV Valve Inspection

• Review SSIV design compliance with API 6A/17D.
• Inspect valve body, actuator, sealing components, and control tubing.
• Witness FAT operations: valve cycling, leakage tests, HP/LP testing, and ESD logic verification.

Documentation & Reporting

• Prepare inspection reports, NCRs, and punch lists.
• Verify QA records, certificates, and MDR completeness.
• Ensure full material traceability and documentation control.

Offshore Readiness Verification

• Validate equipment preservation, tagging, lifting points, and sea-fastening.
• Review ROV operability and interface fit-up.
• Confirm equipment is ready for mobilization and offshore installation.

Interface & Coordination

• Coordinate with subsea engineering, quality teams, vendors, fabrication yards, and installation contractors.
• Communicate inspection findings and ensure close-out before release.

Technical Competence Requirements

• Knowledge of subsea hardware: FOC, flying leads, SSIVs, hubs, connectors.
• Skilled in fiber optic testing (OTDR), hydraulic and electrical testing.
• Understanding of NDT (VT, PT, MT, UT) and coating inspection.
• Familiarity with API 17E/F/D, API 6A, DNV, ISO 13628 standards.
• Experience with SCM interfaces and subsea control systems.

Qualifications & Experience

• Degree/diploma in Mechanical, Electrical, Instrumentation, or Quality Engineering.
• 5 years minimum experience in subsea/offshore inspection for FOC, flying leads, SSIVs, and subsea hardware.
• NDT certifications (CSWIP/PCN/ASNT) preferred.
• Experience in FAT/EFAT/SIT and offshore readiness preparation.

Seniority Level

Not Applicable

Employment Type

Full-time

Job Function

Quality Assurance

Industries

Construction