QA/QC Lead Engineer | Oil and Gas | Saudi Arabia

Hudson Manpower Inc.

Al Jubayl

On-site

SAR 180,000 - 240,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Hudson Manpower Inc. Lead QA/QC Engineer owns the quality system for shutdowns, turnarounds and project work at Saudi Aramco facilities.

You will set up and obtain approval for quality documentation before mobilization, lead the QC team and welder resources on site, and act as the single contact for Aramco inspection through to the final QC dossier. The role requires 8–10 years in Oil & Gas QA/QC and experience on shutdowns, with API 510/570, CSWIP 3.1 or AWS CWI certifications.

Qualifications

  • 8 to 10 years of QA/QC in Oil & Gas.
  • Shutdowns or major projects as QC lead.
  • Experience with Aramco inspection (SATIP / SAIC).
  • Certification: API 510, API 570, CSWIP 3.1 (or AWS CWI).
  • Proven repair procedure writing for static equipment and piping.

Responsibilities

  • Pre-mobilization: prepare FQAP, ITPs, procedures and QC org chart; obtain Aramco approval.
  • Site execution: inspect equipment to ASME VIII Div.1 and API 510; manage welding/QC activities.
  • Close-out: compile QC dossier, issue test packs, review NDE; report KPIs and lessons learned.

Skills

QA/QC leadership
Oil & Gas QC
Aramco inspection
WPS/PQR
NDE methods
Welding procedure
Repair procedures
Flange management
Welder tracking

Education

Bachelor's degree in Mechanical Engineering

Tools

CSWIP 3.1
AWS CWI
ASNT NDT Level II
API 510/570
ASME VIII/IX training

Job description

PURPOSE OF THE ROLE

The Lead QA/QC Engineer owns the quality system for shutdown, turnaround and project work at Saudi Aramco and affiliate facilities. The post-holder sets up and gets approved the quality documentation before mobilization, leads the QC team and welder resources on site, and is the single quality contact for Aramco inspection, the Third Party Inspector and project management through to the final QC dossier.

Key Responsibilities:
  • A. Pre-mobilization and Documentation
    • Prepare FQAP, ITPs, work procedures and QC organization chart; obtain Aramco approval before start.
    • Prepare WPS/PQR packages and welder qualification plan to ASME IX and SAES-W-010 / W-011.
    • Write repair procedures to ASME PCC-2, API 510 / 570 / 653 and SAES; request waivers (SAEP-302) where required.
    • Submit inspector certificates and calibration records for approval; plan QC manpower against the schedule.
    • Review SATIP / SAIC and Schedule Q to fix hold and witness points.
  • B. Execution on Site
    • Inspect static equipment (vessels, exchangers, columns and internals, fin fans, drums) to ASME VIII Div.1 and API 510.
    • Control tank repair, alteration and settlement work to API 650 / 653 and SAES-D-108.
    • Control piping fabrication, PMI, PWHT, hardness and NDE to ASME B31.3, API 570 and SAES-L-350.
    • Run the welder register, WPS-welder matrix, daily allocation and repair-rate tracking (SAEP-1160).
    • Manage flange joint list, torque and leak‑test records (ASME PCC-1, SAEP-351); issue test packs and witness hydro/pneumatic tests (SAES-A-004).
  • C. Close‑out and Reporting
    • Close NCRs, punch A and B items and offer final inspection to Aramco.
    • Review NDE reports and RT films from subcontractors before client submission.
    • Compile and issue the QC dossier (records, certificates, weld maps, test packs, calibration).
    • Report KPIs: welder repair rate, NCR closure, hold-point compliance, dossier status.
    • Record lessons learned for the next shutdown.
  • Bachelor’s degree in Mechanical Engineering.
  • 8 to 10 years of QA/QC in Oil & Gas, with several shutdown or major projects as QC lead.
  • Worked under Aramco inspection (SATIP / SAIC) and led pre-start approval of quality documents.
  • Certification: at least two or three of API 510, API 570, CSWIP 3.1 (or AWS CWI), valid and verifiable.
  • Proven repair procedure writing for static equipment and piping.
Preferred:
  • CSWIP 3.2 Senior Welding Inspector.
  • ASNT NDT Level II (RT, UT, MT, PT).
  • ASME VIII and IX training; knowledge of API 579-1 fitness-for-service.
  • Experience managing welder tracking and flange management systems.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

QA/QC LEAD
QA/QC LEAD

Asmacs • Saudi Arabia

On-site
SAR 350,000 - 520,000
QA/QC Lead Engineer
QA/QC Lead Engineer

Client of Hudson Manpower • Eastern Province

On-site
SAR 420,000 - 660,000
Senior QA/QC Lead – Shutdowns & Onsite Inspections
Senior QA/QC Lead – Shutdowns & Onsite Inspections

Client of Hudson Manpower • Eastern Province

On-site
SAR 420,000 - 660,000
Quality Control Supervisors ( QCS ) – Mechanical ( Welding )
Quality Control Supervisors ( QCS ) – Mechanical ( Welding )

Aitomic Jobs • Saudi Arabia

On-site
SAR 360,000 - 540,000
QA/QC Welding Inspector (ARAMCO Project - August)
QA/QC Welding Inspector (ARAMCO Project - August)

Duruper • Al Jubayl

On-site
SAR 150,000 - 220,000
Senior QA/QC Lead – Shutdown & Turnaround Specialist
Senior QA/QC Lead – Shutdown & Turnaround Specialist

Asmacs • Saudi Arabia

On-site
SAR 350,000 - 520,000
QA/QC Welding Inspector (ARAMCO Approved with CBT)
QA/QC Welding Inspector (ARAMCO Approved with CBT)

Duruper • Al Jubayl

On-site
SAR 120,000 - 180,000
QC Mechanical/Piping Inspector | Oil and Gas | Saudi Arabia
QC Mechanical/Piping Inspector | Oil and Gas | Saudi Arabia

Hudson Manpower Inc. • Medina Province

On-site
SAR 167,000 - 234,000
Senior QA/QC Lead Engineer – Shutdowns & Turnarounds
Senior QA/QC Lead Engineer – Shutdowns & Turnarounds

Hudson Manpower Inc. • Al Jubayl

On-site
SAR 180,000 - 240,000
QC Welding Inspector
QC Welding Inspector

Duruper • Al Jubayl

On-site
SAR 180,000 - 240,000