QA/QC

ZEROFRAME; Taguig; Hybrid; PHP 70,000 - 110,000; Full time

Job summary

ZEROFRAME is seeking a Site QA/QC Officer to ensure that on-site installation works meet approved drawings, project specs, and Zeroframe quality requirements. The role focuses on glass, aluminum, doors, windows, shower enclosures, curtain walls, and related architectural installations from delivery through turnover.

The candidate must be hands-on, detail-oriented, and proactive in identifying defects before costly rework or client complaints. Travel to project sites is required.

Qualifications

• Must have QA/QC, construction inspection or site supervision experience.
• Experience in glass and aluminum installation is highly preferred.
• Knowledge of architectural drawings and shop drawings is required.
• Ability to conduct site measurements and inspections with accuracy.
• Strong attention to detail and thorough reporting skills.
• Good coordination and communication with teams and clients.
• Willing to travel to different project sites as needed.

Responsibilities

• Inspect materials upon arrival, verify quantity, dimensions and specs.
• Document and report damaged, incorrect, or incomplete materials immediately.
• Pre-install verification of site conditions, dimensions, and readiness.
• Coordinate discrepancies with Site Supervisor, PM, and Client before installation.
• Inspect ongoing installation for compliance with drawings and procedures.
• Ensure proper glazing, framing, hardware, and waterproofing installations.
• Prepare NCR / Quality Incident Reports for significant deviations.
• Conduct regular inspections and create punch lists, closing deficiencies before turnover.
• Verify turnover readiness of doors, windows, and related components.

Skills

QA/QC

Site inspections

Documentation

Communication

Travel readiness

Education

Architecture / Civil Engineering / Engineering / Construction Management

Licensed Architect/Engineer (advantage)

Tools

Shop drawings knowledge

Architectural drawings

Job description

About the role

The Site QA/QC Officer is responsible for ensuring that all on-site installation works comply with approved drawings, project specifications, agreed standards, and Zeroframe quality requirements. The position focuses on the quality of glass, aluminum, doors, windows, shower enclosures, curtain walls, frameless systems, sliding doors, and other architectural installations from material delivery through final turnover. The Site QA/QC Officer must be hands‑on, detail‑oriented, and proactive in identifying defects before they become costly rework or client complaints.

Key responsibilities

• Inspect materials upon arrival at the project site including glass panels, aluminum profiles, doors, windows, hardware, silicone, sealants, gaskets, curtain wall components, and sliding door components, verifying quantity, dimensions, type/specification, finish/color, condition, completeness, and visible damage

• Document and report immediately any damaged, incorrect, or incomplete material

• Before installation, verify actual site dimensions, opening dimensions, floor and wall conditions, level and plumb, required clearances, anchor/support locations, waterproofing conditions, work area readiness, and compatibility of delivered materials with approved drawings

• Coordinate discrepancies with the Site Supervisor, Project Manager, Technical Team, and/or Client/Contractor before installation proceeds

• Inspect ongoing installation to ensure compliance with approved drawings and installation procedures, checking proper positioning and alignment, level and plumb, glass clearance, aluminum alignment, frame installation, hardware installation, fasteners and anchors, silicone and sealant application, gaskets and setting blocks, door gaps and clearances, sliding movement, locking mechanisms, waterproofing/sealing, and protection of finished surfaces

• Ensure glass is correct type and thickness, correct size and configuration, properly positioned, free from cracks and chips, free from scratches and unacceptable defects, properly supported, properly sealed, and installed with correct clearances

• Check that doors and windows open and close properly, are properly aligned, have correct clearances, lock and unlock properly, have properly installed hardware, operate smoothly, have proper sealing, and have no unnecessary rubbing or binding

• Prepare NCR / Quality Incident Report for significant deviations including wrong material, wrong dimension, installation outside approved specifications, damaged materials, poor workmanship, repeated installation errors, unauthorized modification, failure to follow approved drawings, and safety or quality‑critical deficiencies

• Conduct regular inspections and prepare punch lists, identifying, documenting, assigning, correcting, re‑inspecting, and closing deficiencies before client/contractor final inspection

• Before turnover, verify all doors and windows operate properly, sliding systems operate smoothly, locks and hardware function correctly, glass is clean and free from damage, aluminum surfaces are free from unacceptable scratches/dents, sealants are properly finished, all required components are installed, protection materials are removed appropriately, work area is clean, and punch‑list items are closed

About you

• Graduate of Architecture, Civil Engineering, Engineering, Construction Management, or related course

• Licensed Architect/Engineer is an advantage

• At least 2 years of QA/QC, construction inspection, or site supervision experience

• Experience in glass and aluminum installation is highly preferred

• Knowledge of architectural drawings and shop drawings

• Ability to conduct site measurements and inspections

• Strong attention to detail

• Good reporting and documentation skills

• Strong communication and coordination skills

• Willing to travel to different project sites