Maintenance Technician

Masimo Corporation; Kuala Lumpur; On-site; MYR 42,000 - 72,000; Full time

Job summary

Masimo Corporation in Malaysia seeks a Maintenance Technician to perform corrective and preventive maintenance on production equipment, guided by schedules and reliability targets. You will work with PLC systems, electronics and electrical controls, molding machines, inkjet printers, and line modifications to keep lines running smoothly.

You will support engineering and TPM initiatives to minimize downtime and drive continuous improvement, while maintaining safety and quality across the plant.

Qualifications

• 3 year minimum in maintenance.
• Good communication skills with all levels.
• Experience in molding machines, chillers and dryers.
• Experience in electric control and electrical test.
• Experience in molding machines and peripheral equipment.
• Experience in pneumatic presses, inkjet printers and safety equipment development.
• Experience in control systems and PLC.
• Basic English communication.

Responsibilities

• Perform routine maintenance and work orders for corrective and preventive maintenance.
• Execute preventive maintenance according to schedules.
• Support production lines to maintain product quality and equipment uptime.
• Install and modify manufacturing lines.
• Repair electronic equipment, power supplies and general electronics.
• Assist in design and installation of electric control systems.
• Contribute ideas for cost reduction and improvement projects.
• Analyze and program PLC; repair inkjet printers.

Skills

PLC programming

Electronics repair

Electrical control

Molding machines

Inkjet printers

Troubleshooting

TPM knowledge

Auto electrical tests

Education

Maintenance experience (3 years)

Tools

Industrial equipment wiring

Soldering

Electrical test equipment

Job description

The Maintenance Technician is responsible for performing work orders for corrective and preventive maintenanceaccording to maintenance scheduled, electrical minor repairs, and line design movements as required.

Also perform electronics equipment repairs and electrical installations, analysis and installation of electric control components, Must to have knowledge in PLC, knowledge repair molding machines and peripheral equipment, repair inkjet printers and jet calibration.

Maintenance technician C is responsible for execute to support engineering department on the development of specialized equipment, implementation of improvements with focus down time reduction, supporting improvement projects.

The maintenance technician D is responsible for multiple highly complex major projects requiring innovative original solutions where results are key to successful completion of major projects.

Work mostly independently with minimal supervision. Attend breakdowns, identify fault and problem solve, with minimal downtime to production. High knowledge in solving problems with most of the equipment in the plant. Strong TPM knowledge, Analyze Maintenance Reports.

Duties & Responsibilities:

• Following to quality system and good manufacturing practices.
• Performs routine maintenance on equipment as requested by Maintenance Supervisor and perform work orders for corrective and preventive maintenance.
• Executes preventive maintenance on equipment according to maintenance schedules.
• Support to production lines, with focus to maintain product quality and equipments working in good conditions.
• Report unsafe working conditions to area supervisor.
• Maintain backup equipments in good conditions and properly working when required.
• Maintain safety devices of equipments working in good conditions and properly.
• Installation and modification of manufacturing lines.
• Performs Electronic equipment repairs, power supplies and general electronic.
• Assembly and wiring for industrial equipment.
• Failure analysis for electric test equipment.
• Maintain molding machine working in good conditions.
• Maintain molding dryers working in good conditions.
• Execute electric control installations.
• Support on the design of new equipments.
• Execute and installation of electric control systems.
• Propose improvement development ideas to cost reduces and improvement projects.
• Analysis and programming in PLC.
• Analysis and repair Inkjet printers.
• Supporting on automation of equipment.
• High support on the design of new equipment.
• Suggest improvement to preventative maintenance, high knowledge in troubleshooting and repairs to different equipment.
• Apply preventive measure to reduce the risk of future problems.
• Strong analysis and programming in PLC
• Constantly development ideas of cost reduction and improvement projects
• Strong knowledge in electronic and pneumatic systems.
• Excellent leadership

Minimum & Preferred Qualifications and Experience:

Minimum Qualifications:

• Minimum Qualifications:
• 3 year minimum in maintenance.
• Must possess good communication skills, and be able to interface with all levels of employees within the organization.
• General mathematical skills.
• Automatic equipment failure analysis.
• Experience in Molding machine, chillers and dryers.
• Experience in electric control.
• Experience in electrical test.
• Experience in molding machine and peripheral equipment.
• Experience in the manufacture of pneumatic presses, inkjet printers and the development of safety equipment in these equipment.
• Experience in control systems and PLC.
• Experience in costs reduction projects and improvement projects.
• 5 years minimum in maintenances areas.
• Strong communication skill and be able to interface with all levels of employees within the organization.
• Strong experience in automatic equipment failures analysis.
• Strong experience in electronic control.
• Strong experience in the manufacture of pneumatic presses, inkjet printers and the development of safety equipment in this equipment.
• Desirable experience in costs reduction projects and improvement projects.
• Basic English communication.

Preferred Qualifications:

Technician Level A, B, C, D.

• Industrial Equipment Experience.

Education:

• 3 years of ascertainable experience in maintenance area with strong electromechanical systems knowledge.

Job Summary:

Technician Level A.

The Maintenance Technician is responsible for performing work orders for corrective and preventive maintenanceaccording to maintenance scheduled, electrical minor repairs, and line design movements as required.

Technician Level A, B.

Also perform electronics equipment repairs and electrical installations, analysis and installation of electric control components, Must to have knowledge in PLC, knowledge repair molding machines and peripheral equipment, repair inkjet printers and jet calibration.

Technician Level A, B, C.

Maintenance technician C is responsible for execute to support engineering department on the development of specialized equipment, implementation of improvements with focus down time reduction, supporting improvement projects.

Technician Level A, B, C, D.

The maintenance technician D is responsible for multiple highly complex major projects requiring innovative original solutions where results are key to successful completion of major projects.

Work mostly independently with minimal supervision. Attend breakdowns, identify fault and problem solve, with minimal downtime to production. High knowledge in solving problems with most of the equipment in the plant. Strong TPM knowledge, Analyze Maintenance Reports.

Social Skills: Leadership, Excellent Team Working, Committed.

Duties & Responsibilities:

• Technician Level A.
• Following to quality system and good manufacturing practices.
• Performs routine maintenance on equipment as requested by Maintenance Supervisor and perform work orders for corrective and preventive maintenance.
• Executes preventive maintenance on equipment according to maintenance schedules.
• Support to production lines, with focus to maintain product quality and equipments working in good conditions.
• Report unsafe working conditions to area supervisor.
• Maintain backup equipments in good conditions and properly working when required.
• Maintain safety devices of equipments working in good conditions and properly.
• Installation and modification of manufacturing lines.
• Basics electrical installations.

• Technician Level A, B.
• Performs Electronic equipment repairs, power supplies and general electronic.
• Assembly and wiring for industrial equipment.
• Failure analysis for electric test equipment.
• Maintain molding machine working in good conditions.
• Maintain molding dryers working in good conditions.
• Execute electric control installations.

• Technician Level A, B, C.
• Support on the design of new equipments.
• Execute and installation of electric control systems.
• Propose improvement development ideas to cost reduces and improvement projects.
• Analysis and programming in PLC.
• Analysis and repair Inkjet printers.
• Supporting on automation of equipment.

• Technician Level A, B, C, D.
• High support on the design of new equipment.
• Suggest improvement to preventative maintenance, high knowledge in troubleshooting and repairs to different equipment.
• Apply preventive measure to reduce the risk of future problems.Strong analysis and programming in PLC
• Constantly development ideas of cost reduction and improvement projects
• Strong knowledge in electronic and pneumatic systems.
• Excellent leadership
• Excellent team working.

Minimum & Preferred Qualifications and Experience:

Minimum Qualifications:

• Minimum Qualifications:
• Technician Level A.
• 3 year minimum in maintenance.
• Must possess good communication skills, and be able to interface with all levels of employees within the organization.
• General mathematical skills.
• Technician Level A, B.
• Electronic equipment reparation experience, soldering iron experience
• Automatic equipment failure analysis.
• Experience in Molding machine, chillers and dryers.
• Experience in electric control.
• Experience in electrical test.
• Technician Level A, B, C.
• Experience in molding machine and peripheral equipment.
• Experience in the manufacture of pneumatic presses, inkjet printers and the development of safety equipment in these equipment.
• Experience in control systems and PLC.
• Experience in costs reduction projects and improvement projects.
• Technician Level A, B, C, D.
• 5 years minimum in maintenances areas.
• Strong communication skill and be able to interface with all levels of employees within the organization.
• Strong experience in automatic equipment failures analysis.
• Strong experience in electronic control.
• Strong experience in the manufacture of pneumatic presses, inkjet printers and the development of safety equipment in this equipment.
• Desirable experience in costs reduction projects and improvement projects.
• Basic English communication.