M - E COORDINATOR - MAINTENANCE ENGINEER

PMW Industries; Ipoh; On-site; MYR 67,000 - 112,000; Full time

Job summary

PMW Winabumi Sdn Bhd (Pile Manufacturing) seeks an M&E Coordinator who will manage all mechanical and electrical works during factory setup and subsequently transition to a Maintenance Engineer for ongoing plant reliability and operations.

You will coordinate with main contractors, M&E subcontractors, consultants, and project teams to ensure proper planning, installation, testing, commissioning, and handover in line with designs, standards, and safety requirements.

Qualifications

• Degree or Diploma in Mechanical Engineering, Electrical Engineering, or Building Services Engineering.
• Minimum 3–5 years of proven experience as an M&E Coordinator, M&E Supervisor, or Maintenance Engineer.
• Experience with a main contractor or a dedicated M&E subcontractor is highly valued.
• Technical skills and knowledge of M&E systems, installation sequences, and commissioning procedures.
• Strong ability to read and interpret complex M&E drawings and familiarity with codes/regulations.

Responsibilities

• Coordinate and oversee all mechanical and electrical works throughout the project, from design to handover.
• Review M&E drawings, specifications, and BIM models for constructability and coordination.
• Chair regular M&E coordination meetings with subcontractors and other trades.
• Ensure works are sequenced and tested per approved designs, standards, and safety requirements.
• Procure and track M&E packages, monitor deliveries and labor, and maintain progress reporting.
• Ensure proper as-built documentation, warranties, and hand over closeout documentation.
• Post-construction, transition to Maintenance Engineer and oversee factory maintenance programs.
• Develop preventive and predictive maintenance plans for plant equipment and building services.
• Coordinate external contractors for maintenance, service, and repairs; monitor performance and safety.

Skills

M&E coordination

Maintenance planning

Reading drawings

Safety compliance

Education

Degree or Diploma in Mechanical or Electrical Engineering

3–5 years M&E experience

Main contractor / M&E subcontractor experience

Ability to read complex M&E drawings

Knowledge of building codes & regs

Job description

M - E COORDINATOR - MAINTENANCE ENGINEER

PMW Group of Companies is a Malaysia-based organization with over four decades of experience in the design and fabrication of concrete poles, piles, and moulds. Over the years, the Group has expanded into advanced lighting solutions, including LED and solar street lighting systems. Committed to innovation, quality, and customer satisfaction, PMW Group continues to grow as a trusted and forward-thinking partner in delivering reliable infrastructure and lighting solutions locally and internationally.

Company: PMW Winabumi Sdn Bhd (Pile Manufacturing)

Job Summary

The position will initially serve as the M&E Coordinator during the construction and setup of PMW Winabumi's new factory, with responsibility for coordinating and overseeing all mechanical and electrical works throughout the project.

The incumbent will act as the key coordination point between the Company, main contractor, M&E subcontractors, consultants, project team, and other stakeholders to ensure that M&E works are properly planned, coordinated, installed, tested, commissioned, and handed over in accordance with approved designs, specifications, quality standards, safety requirements, and the overall construction schedule.

Upon completion and commissioning of the new factory, the position will transition into the Maintenance Department as a Maintenance Engineer, taking responsibility for overseeing the factory's maintenance activities and ensuring the reliability, availability, safety, and efficient operation of its mechanical, electrical, utility, production, and engineering systems.

The role therefore requires an individual who can successfully manage both project-stage M&E coordination and post-construction engineering and maintenance operations.

Summary of Duties and Responsibilities

A. M&E Coordination – Construction & Factory Setup Phase

1. Design & Planning Coordination

• Review M&E design drawings, specifications, and BIM models for constructability, coordination, and compliance.
• Identify and resolve clashes between architectural, structural, and M&E services during pre-construction and construction phases.
• Coordinate with consultants (M&E engineers) and subcontractors to finalize detailed shop drawings and methodologies.
• Develop and monitor the M&E project schedule, ensuring it integrates with the main construction program.

2. On-Site Coordination & Supervision

• Oversee the installation of all mechanical (HVAC, plumbing, fire protection) and electrical (power, lighting, controls, LV systems) services.
• Chair regular M&E coordination meetings with subcontractors and other trades.
• Ensure works are sequenced correctly to avoid conflicts and delays (e.g., ductwork before ceiling installation).
• Manage the interface between civil/structural works and M&E installations.

3. Quality & Technical Compliance

• Inspect installations to ensure they meet approved drawings, specifications, and relevant codes/standards (e.g., NFPA, IPC, NEC, ASHRAE, local regulations).
• Monitor material and equipment submissions for approval.
• Witness testing and commissioning of M&E systems, ensuring procedures are followed.
• Ensure proper as-built documentation is maintained by subcontractors.

4. Procurement & Resource Management

• Assist in the procurement process for M&E packages, including technical evaluation of subcontractor bids.
• Track delivery of M&E materials and equipment to align with the construction schedule.
• Monitor M&E labor levels and productivity on site.

5. Documentation & Reporting

• Maintain accurate M&E progress reports, RFI (Request for Information) logs, and change order tracking.
• Document site instructions, non-conformances, and technical queries.
• Compile and hand over O&M manuals, warranties, and as-built drawings at project closeout.

B. Maintenance Engineer – Post-Construction Phase

Upon completion, testing, commissioning, and handover of the new factory, the position will transition into the Maintenance Department as a Maintenance Engineer.

1. Maintenance Management

• Oversee the day-to-day maintenance activities for the factory's mechanical, electrical, utility, and engineering systems.
• Develop and implement preventive and predictive maintenance programmes for plant equipment, machinery, electrical systems, utilities, and building services.
• Coordinate corrective and breakdown maintenance to minimize equipment downtime and production disruption.
• Monitor equipment performance, reliability, and maintenance history.
• Establish appropriate maintenance schedules, checklists, inspection routines, and maintenance records.

2. Factory Equipment & Utilities

• Oversee the maintenance of production machinery, electrical systems, compressors, pumps, motors, generators, water systems, and other factory utilities.
• Support production teams in troubleshooting equipment failures and technical issues.
• Identify recurring equipment problems and implement appropriate corrective and preventive actions.
• Ensure critical equipment and spare parts are properly identified and maintained.
• Coordinate external contractors, service providers, and specialist vendors for maintenance and repair works.
• Review contractor work quality and ensure work is completed according to agreed specifications and safety requirements.
• Coordinate servicing, inspection, testing, and certification of relevant equipment and systems.
• Evaluate contractor performance and recommend improvements where required.

4. Safety, Compliance & Reliability

• Ensure maintenance activities are carried out safely and in compliance with Company policies, applicable laws, regulations, and safety requirements.
• Identify potential equipment and maintenance-related risks and implement appropriate mitigation measures.
• Promote a proactive maintenance culture focused on equipment reliability and operational continuity.

5. Maintenance Planning & Improvement

• Prepare annual and periodic maintenance plans and budgets.
• Monitor maintenance costs, spare parts consumption, equipment downtime, and maintenance KPIs.
• Identify opportunities to improve equipment reliability, energy efficiency, maintainability, and operational performance.
• Recommend equipment upgrades, replacement, modification, or improvement projects where necessary.
• Support continuous improvement initiatives to reduce breakdowns, downtime, maintenance costs, and operational risks.

Qualifications, Skills Education & Experience

• Degree or Diploma in Mechanical Engineering, Electrical Engineering, or Building Services Engineering.
• Minimum [3-5] years of proven experience as an M&E Coordinator, M&E Supervisor, or Maintenance Engineer.
• Experience with a main contractor or a dedicated M&E subcontractor is highly valued.
• Technical Skills
• In-depth knowledge of M&E systems, installation sequences, and commissioning procedures.
• Strong ability to read and interpret complex M&E drawings.
• Familiarity with building codes, standards, and regulations pertaining to mechanical and electrical works.