Senior Set ups Engineer

Eaton Group; Reynosa; Presencial; MXN 420.000 - 780.000; Jornada completa

Descripción de la vacante

Eaton is seeking a Senior Setups Engineer in Reynosa to lead new product introduction via set ups for electromechanical and electronics lines. You will validate new specs, develop validation plans, and guide ECO processes with Enovia and SAP while ensuring compliance with hazardous material initiatives.

Ideal candidates have a Bachelor’s in Electrical Engineering, 5+ years in manufacturing, and strong English communication.

Formación

• Bachelors Degree in Electrical Engineering.
• Intermediate to advanced English; ability to communicate with customers and suppliers.
• 5+ years of experience in a manufacturing environment.
• Ability to design using AutoCAD.
• Experience with electronics-based devices and testing/validation.
• Familiarity with product lifecycle and MRP setup.

Responsabilidades

• Release new setups and coordinate related actions (Enovia drawings, SAP configuration).
• Provide product line support for new setups introduction.
• Lead Buy-Sell opportunity definitions and requirements for implementation.
• Lead cost-out activities from an engineering/material perspective.
• Ensure compliance with hazardous material reduction initiatives (RoHS, WEEE).
• Collaborate with customers and internal teams to meet launch deadlines.

Conocimientos

Electrical Engineering

English Proficiency

Manufacturing Experience

AutoCAD

Electronics Testing

MRP Knowledge

Educación

Bachelors Degree in Electrical Engineering

Herramientas

Enovia

SAP

Descripción del empleo

Eaton’s IS VEH EMB division is currently seeking a Senior Set ups Engineer.

Eaton announced, on June 11, 2026, the intent to combine its Mobility Group (including both the Vehicle and eMobility segments) with a new company. We expect to complete this process by the end of the first half of 2027. The compensation and benefits that will initially be offered for this position are based on Eaton's plans, programs and practices. If you are offered and accept this position and are actively employed by the Mobility Group when the transaction closes, the new company will provide further details to employees concerning compensation and benefits at that time.

What you’ll do:

PRIMARY FUNCTION:

Responsible for the new products introduction via set ups, for electromechanical and electronics product lines, analyze new product requirements vs actual products specifications, if new set ups has new or revised product specifications, develop a validation plan (DVP&R) to guarantee product integrity, validate all new customer, marketing and sales new product changes ideas. Responsible to lead the weekly meetings for the engineering changes orders (ECO) process.

Subject matter expert for the changes managements control system (Enovia and SAP)

Ensures new business opportunities (NBOs) are successfully engineered and documented such that they move quickly to the manufacturing floor via setups. Strong focus on new Buy‑Sell opportunities follow up / successful launch, and on product compliance to Hazardous Material reduction initiatives (i.e., RoHS, WEEE, etc). Follows the production cycle and works with marketing, development, tooling and manufacturing to ensure that the product meets the needs of customer and meets the product specifications.

Provide support on technical inquiries coming from production line and external/internal suppliers in order to help achieve production plan and OTD targets. As well as perform root cause analysis of product line issues/inquiries during release stages of the new set‑ups.

ESSENTIAL FUNCTIONS:

• A. Release new setups as requested by Marketing/Sales thru the official request process; coordinating all actions are covered prior to the release (Enovia drawings, SAP configuration, Test Equipment updates, import/export classification, etc.)
• B. Provide product line support related to new set ups introduction
• C. Coordinate and follow up specifically on new Buy‑Sell opportunities and definition of requirements for implementation
• D. Lead “Cost Out” activities from an engineering and material perspective
• E. Evaluate product material to ensure compliance with Hazardous Material reduction initiatives with coordination from Product Stewardship team
• F. Work with internal and external customers to design and develop solutions to meet customer’s needs
• G. Develop comprehensive tests to validate new product designs if required
• H. Ensure NBOs are designed, engineered and entered into the database drawing system
• I. Research the use of new materials that provide boost in technology and/or a significant cost improvement
• J. Conduct DFMEA on all new development projects to gage the potential impact of the changes
• K. Establish and maintain a collaborative working relationship with key customers and vendors
• L. Conduct testing of all new products in accordance with VC standards and customer requirements
• M. Investigate and analyze new materials and their appropriate use within our product line
• N. Provide support to outside suppliers (part substitutions, test strategies, create and maintain documentation for manufacturing)
• O. Component selection and validation
• P. Participation as the specialist for electronics and associated components in core R&D team.
• Q. RFE support to NPI department.
• R. Back-up support on technical inquiries found during production line processes and requested by suppliers/customers.
• S. Plan, coordinate, and execute the work required for the launch of new projects.
• T. Monitor processes and ensure compliance with established deadlines.
• U. Coordinate with the production team to ensure everything is ready for the launch.
• V. Identify and resolve potential issues that may arise during the launch.
• W. Develop, lead, and promote a culture in the organization that supports the expected results in the Occupational Safety, Health, and Environmental system (MESH).
• X. Maintain waste segregation culture.
• Y. Separate hazardous waste from the normal trash
• Z. Place waste according to the assigned containers.
• AA. Maintain your area clean and free of contaminants.
• BB. Not waste of water or electricity.
• CC. Report any activity that can put in risk my safety and environment.
• DD. Identify and give adequate disposition to all chemical products, which can contaminate the environment.
• EE. Act/Report immediately any chemical discharge case.
• FF. Ensure the rights containers for disposition of hazardous waste (identifying containers and containers to prevent discharge)

Qualifications:

SPECIALIZED KNOWLEDGE:

• Bachelors Degree in Electrical Engineering
• Intermediate to Advanced English required. Ability to communicate effectively with customers and suppliers, participate in technical discussions, troubleshoot issues, and manage professional email communication.
• 5 or more years’ experience in a manufacturing environment
• Ability to design using AutoCAD
• Working knowledge of a wide variety of electronics-based devices and the processes required to test and validate their functionality
• Knowledge in the product life cycle flow through the manufacturing facility and MRP setup
• Experience in manufacturing environment, with electrical and electromechanical systems.
• Familiarity with root cause analysis techniques a plus
• Familiarity of commercial vehicle markets and the environmental requirements a plus

Skills:

FUNTIONAL COMPETENCES:

Zero Incident Workplace Culture. The ability to integrate technical skill sets required to identify and eliminate hazards associated with a manufacturing process and its supporting elements. Knowledge and experience in the process value stream, specifications, equipment, cycle time and capabilities. Competencies considered include, electrical circuit design, programmable controllers, safety interlock circuitry, lock out tag out, isolation of potential energy, ergonomics and material handling methods and procedures. Experience and knowledge with Hazardous Materials and Workplace Exposure including chemical use and storage, gases, noises, dust, fumes, vapors, and ventilation considerations. Engagement in efforts to influence 100% ownership of safety, accountability, and the sharing of knowledge to a continued focus of creating a zero incident workplace. Know how your roles, responsibilities and authority affects the performance of the ISO14001 and ISO45001 system.

Creativity. Comes up with a lot of new and unique ideas; easily makes connections among previously unrelated notions; tends to be seen as original and value-added in brainstorming settings.

Innovation Leadership. Is good at bringing the creative ideas of others to market; has good judgment about which creative ideas and suggestions will work; has a sense about managing the creative process of others; can facilitate effective brainstorming; can project how potential ideas may play out in the marketplace.

Problem Solving. Uses rigorous logic and methods to solve difficult problems with effective solutions; probes all fruitful sources for answers; can see hidden problems; is excellent at honest analysis; looks beyond the obvious and doesn't stop at the first answers.

Process Management. Good at figuring out the processes necessary to get things done; knows how to organize people and activities; understands how to separate and combine tasks into efficient work flow; knows what to measure and how to measure it; can see opportunities for synergy and integration where others can't; can simplify complex processes; gets more out of fewer resources.

Technical Learning. Picks up on technical things quickly; can learn new skills and knowledge; is good at learning new industry, company, product, or technical knowledge; does well in technical courses and seminars. Deals with concepts and complexity comfortably. Described as intellectually sharp, agile and capable.

Additional Information:

Eaton leadership model

• Thinks and Acts strategically.
• Gets results through self and others
• Builds Organizational Capability.
• Enables Digital Midset
• Leadership attributes (passionate, accountable, ethical, learn, transparent, efficient)

Aspirational Objectives

• To be the preferred supplier to customers and channel partners
• To make work exciting, engaging and meaningful for our employees
• To make our communities stronger
• To ensure the safety, health and wellness of our employees
• To be a model of inclusion and diversity in our industry
• To be active stewards of the environment

EHS Commitment

• Promotes "Zero Incident Culture" in the work area.
• Promote "Environmental Culture" in the work area.
• Participate in all 100% of the legal and corporate EHS trainings.
• Reporting unsafe conditions and behaviors, such as "Near misses", "Gembas", and "Coaching programs".

Continuous Improvement (CI) Commitment

• Participate on continuous improvements programs; ECIS, OpA, i4.0, EBS Pull, Cost Out, RIE
• Generate and implement Ideas.
• Lead of RIE’s event assigned.
• Promotes a recognition culture.
• Participate on CI trainings assigned.
• Import and export best and transferable practices.
• Attend daily accountability Tier meeting.

DIMENSIONS:

• TRCR/DACR
• Corrective actions for customer reject due to design problems
• Identify alternate components and testing validation plan.
• Cost out improvements
• On time implementation of new set-ups and new Buy-Sell bussiness
• Inquiries

All positions may require participation in video and in-person interviews as part of the hiring process. All candidates will be evaluated based on job-related competencies, and all candidates’ privacy rights and data security will be protected in accordance with applicable laws.

We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law.