Rtl Design Engineer

HC Robotics

Kolkata, Hyderabad

On-site

INR 1,200,000 - 1,800,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

HC Robotics in Kolkata seeks an experienced RTL & FPGA engineer to design, implement, and validate digital logic on FPGA platforms, driving blocks from specification through RTL, synthesis, timing closure, and bring-up.

You will work on AI/CNN accelerators, video pipelines, and high-speed interfaces on AMD/Xilinx Zynq and UltraScale+ devices, collaborating with verification, embedded software, and hardware teams; there is potential for ASIC porting.

Qualifications

  • RTL design in Verilog and SystemVerilog (synthesizable coding).
  • Micro-architecture for datapath and control logic FSMs, pipelining, FIFOs, arbiters.
  • Complete FPGA design flow in Xilinx/AMD Vivado (synthesis, implementation, bitstream).
  • XDC timing constraints and FPGA timing closure.
  • Clock Domain Crossing (CDC) and reset design techniques.
  • AMBA protocols AXI4 / AXI4-Lite / AXI4-Stream.
  • Vivado IP Integrator and Zynq-7000 / Zynq UltraScale+ PSPL integration.
  • On-board debugging using ILA/VIO (ChipScope).
  • Simulation using Vivado Simulator / QuestaSim / Xcelium and waveform debug.
  • Scripting in TCL and Python for flow automation.

Responsibilities

  • Define micro-architecture and block-level specifications from system requirements.
  • Design and implement synthesizable RTL using Verilog/SystemVerilog for FPGA (and ASIC-portable) targets.
  • Run FPGA synthesis, implementation, and bitstream generation in Vivado.
  • Write XDC constraints and achieve timing closure on FPGA designs.
  • Build and integrate Vivado block designs with Zynq PS, AXI interconnects, DMA, MIG/DDR, and custom IP.
  • Develop and optimize IP using Vitis HLS where appropriate.
  • Perform lint and CDC checks and handle multi-clock, reset, and synchronization design.
  • Write testbenches, run simulations, and debug failures with the verification team.
  • Bring up designs on hardware and debug using ILA/VIO, logic analyzers, and oscilloscopes.
  • Interface with camera, video, LVDS, and other high-speed peripherals on custom boards.
  • Work with embedded software teams on device tree, drivers, and PSPL integration under PetaLinux.
  • Optimize designs for resource utilization, performance, and power.
  • Review code, mentor junior engineers, and maintain design documentation and register maps.

Skills

RTL Design (Verilog/SystemVerilog)
Micro-architecture design
FPGA design flow (Vivado)
XDC timing constraints
Clock Domain Crossing
AMBA AXI protocols
Zynq PS/PSPL integration
On-board debugging (ILA/VIO)
Simulation (Vivado/QuestaSim/Xcelium)
Scripting TCL/Python

Tools

Vivado
Vitis HLS
Vitis
Xilinx SDK
Vivado Simulator
QuestaSim
Xcelium
SpyGlass
PetaLinux

Job description

Job Summary

We are looking for an experienced RTL & FPGA Engineer to join our hardware design team. The candidate will design, implement, and validate digital logic on FPGA platforms, taking blocks from specification through RTL, synthesis, implementation, timing closure, and on-board bring-up.

This role involves working on AI/CNN accelerators, video pipelines, and high-speed interfaces on AMD/Xilinx Zynq and UltraScale+ platforms, in close collaboration with verification, embedded software, and hardware board teams. Designs may also be ported to ASIC.

Key Responsibilities
  • Define micro-architecture and block-level specifications from system requirements.
  • Design and implement synthesizable RTL using Verilog/SystemVerilog for FPGA (and ASIC-portable) targets.
  • Run FPGA synthesis, implementation, and bitstream generation in Vivado.
  • Write XDC constraints and achieve timing closure on FPGA designs.
  • Build and integrate Vivado block designs with Zynq PS, AXI interconnects, DMA, MIG/DDR, and custom IP.
  • Develop and optimize IP using Vitis HLS where appropriate.
  • Perform lint and CDC checks and handle multi-clock, reset, and synchronization design.
  • Write testbenches, run simulations, and debug failures with the verification team.
  • Bring up designs on hardware and debug using ILA/VIO, logic analyzers, and oscilloscopes.
  • Interface with camera, video, LVDS, and other high-speed peripherals on custom boards.
  • Work with embedded software teams on device tree, drivers, and PSPL integration under PetaLinux.
  • Optimize designs for resource utilization, performance, and power.
  • Review code, mentor junior engineers, and maintain design documentation and register maps.
Mandatory Skills

Candidates must have strong hands-on experience in the following:

  • RTL design in Verilog and SystemVerilog (synthesizable coding)
  • Micro-architecture for datapath and control logic FSMs, pipelining, FIFOs, arbiters
  • Complete FPGA design flow in Xilinx/AMD Vivado (synthesis, implementation, bitstream)
  • XDC timing constraints and FPGA timing closure
  • Clock Domain Crossing (CDC) and reset design techniques
  • AMBA protocols AXI4 / AXI4-Lite / AXI4-Stream
  • Vivado IP Integrator and Zynq-7000 / Zynq UltraScale+ PSPL integration
  • On-board debugging using ILA/VIO (ChipScope)
  • Simulation using Vivado Simulator / QuestaSim / Xcelium and waveform debug
  • Scripting in TCL and Python for flow automation
Preferred Skills

Experience in any of the following is an added advantage:

  • High-Level Synthesis using Vitis HLS
  • AI/ML or CNN accelerator design (int8 datapaths, line buffers, systolic arrays)
  • Video/image processing pipelines (H.264/H.265, ISP, SDI, VDMA)
  • High-speed interfaces DDR (MIG), LVDS, MIPI CSI-2, PCIe, GTH/GTY transceivers
  • Kria K26 / KV260 / ZCU10x evaluation platforms
  • PetaLinux, device tree, and Linux driver basics
  • QSPI/SD boot flow and FPGA configuration
  • Lint and CDC tools SpyGlass / Questa CDC
  • ASIC flow awareness - synthesis (Genus/DC), STA, and FPGA-to-ASIC porting
  • SystemVerilog Assertions (SVA) and UVM fundamentals
  • Git version control and Linux development environments
Desired Candidate Profile
  • Proven track record of delivering FPGA designs to production or customer deployment.
  • Strong debugging skills across simulation, timing, and lab hardware.
  • Ability to own a design from specification to working hardware with minimal supervision.
  • Good understanding of FPGA resource trade-offs (LUT, FF, BRAM, URAM, DSP).
  • Clear written and verbal communication; comfortable working with teams across time zones.
  • Ability to guide and review the work of junior engineers.
Tools & Technologies

Hands-on experience with tools from the following categories is expected:

  • FPGA: Vivado, Vitis HLS, Vitis, ILA/VIO
  • Embedded: PetaLinux, Xilinx SDK/Vitis
  • Simulation: Vivado Simulator / QuestaSim / Xcelium
  • Lint & CDC: SpyGlass / Questa CDC
  • Lab: Oscilloscope, Logic Analyzer, JTAG
  • Scripting: TCL, Python, Shell
  • Version Control: Git
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

ASIC/SOC - FPGA Engineer
ASIC/SOC - FPGA Engineer

ACL Digital • Hyderabad

On-site
INR 1,200,000 - 1,800,000
Fpga Design Engineer
Fpga Design Engineer

Coreel Technologies • Bengaluru

On-site
INR 900,000 - 1,300,000
Technical Lead – FPGA/RTL Design
Technical Lead – FPGA/RTL Design

CoreEL Technologies • Bengaluru

On-site
INR 1,500,000 - 2,500,000
Senior FPGA Design Engineer
Senior FPGA Design Engineer

CoreEL Technologies • Bengaluru

On-site
INR 1,200,000 - 1,500,000
FPGA Design Engineer (VHDL)
FPGA Design Engineer (VHDL)

Confidential Careers • Maharashtra

On-site
INR 1,200,000 - 1,800,000
FPGA Lead
FPGA Lead

Cortex Consultants LLC • Bengaluru Urban

On-site
INR 1,000,000 - 2,000,000
Design Engineer RTL
Design Engineer RTL

Digital Core Technologies Pvt Ltd • Ernakulam

On-site
INR 900,000 - 1,300,000
Sr. Design Engineer 2
Sr. Design Engineer 2

Tessolve • Bengaluru

On-site
INR 2,500,000 - 3,500,000
FPGA Engineer
FPGA Engineer

Cortex Consultants LLC • Hyderabad

On-site
INR 1,200,000 - 1,800,000
Lead FPGA Design Engineer (FPGA Design, Physical Implementation)
Lead FPGA Design Engineer (FPGA Design, Physical Implementation)

QTrino Labs • Gurugram District

On-site
INR 3,500,000 - 6,000,000