Lead FPGA Design Engineer (FPGA Design, Physical Implementation)

QTrino Labs

Gurugram District

On-site

INR 3,500,000 - 6,000,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

QTrinoLabs in India seeks a hands-on Lead FPGA Design Engineer to own end-to-end FPGA implementation from RTL to floorplanning, placement, routing, and timing closure. You will collaborate with RTL, verification, and firmware teams to deliver high-performance FPGA solutions.

The role requires 3+ years of FPGA experience, strong Verilog/SystemVerilog skills, and experience with Vivado and build automation. Office-based in Gurugram.

Qualifications

  • A minimum of 3 years hands-on FPGA design and implementation experience.
  • Strong hands-on experience in Verilog or SystemVerilog for datapath and control logic.
  • End-to-end FPGA flow: synthesis, floorplanning, placement, routing, timing closure, and basic board bring-up.
  • Knowledge of STA, clock and I/O constraints, and generated clocks.
  • Experience with CDC/Reset design and safe clock-domain crossings.
  • Ability to analyze timing and resource reports to optimize paths, routing, and area.
  • Basic C programming and MMIO register-access for hardware debugging.
  • Familiarity with FPGA toolchains and build automation scripting; Git for version control.

Responsibilities

  • RTL & datapath development to implement pipelined datapaths and platform controllers.
  • Physical implementation and timing closure, including clock constraints and floorplanning across configurations.
  • Reconfigurable architecture and interface isolation for configuration builds.
  • System integration and bring-up, diagnosing clock, reset, and calibration issues on hardware.
  • Hardware debugging with register-access diagnostics for owned interfaces.
  • Build and release management with reproducible scripts and validated reports.

Skills

Verilog / SystemVerilog
FPGA design
Digital design
C programming
Build automation
Git version control

Education

B.E./B.Tech in ECE/EE/EEE
M.E./M.Tech in ECE/EE/EEE

Tools

Vivado
Tcl scripting
Python scripting
Git

Job description

QTrinoLabs is seeking a hands-on Lead FPGA Design Engineer to take end-to-end ownership of FPGA implementationfrom synthesizable RTL through floorplanning, placement, routing, and timing closure. This role blends datapath design, physical implementation, and targeted board bring-up. You will work closely with RTL, verification, and firmware engineers to deliver robust, high-performance FPGA solutions.

Role & responsibilities
  • RTL & Datapath Development: Design pipelined datapaths and platform controllers while efficiently mapping arithmetic, memories, and control logic to FPGA resources.
  • Physical Implementation & Timing Closure: Own clock and I/O constraints, floorplans, implementation runs, resource budgets, and timing closure across all supported configurations.
  • Reconfigurable Architecture: Implement static and reconfigurable regions, interface isolation, and compatible configuration builds.
  • System Integration & Bring-Up: Integrate memory and peripheral IP, and diagnose clock, reset, calibration, and interface failures directly on hardware.
  • Hardware Debugging: Write focused register-access and diagnostic code for owned interfaces, resolving RTL and implementation issues uncovered during verification.
  • Build & Release Management: Maintain reproducible build scripts, peer-reviewed constraints, and implementation reports tied strictly to tested design revisions.
Preferred candidate profile
  • Education & Experience: B.E./B.Tech or M.E./M.Tech in ECE, EE, or EEE with at least 3 years of relevant hands-on experience in FPGA design and implementation.
  • RTL Design: Strong hands-on experience in Verilog or SystemVerilog covering synchronous control, arithmetic logic, FSMs, pipelined datapaths, and backpressure handling.
  • FPGA Implementation: End-to-end experience covering synthesis, floorplanning, placement, routing, timing closure, and basic board bring-up.
  • Static Timing Analysis (STA): Working knowledge of clock and I/O constraints, generated clocks, setup/hold checks, clock uncertainty, and justified timing
  • CDC & Reset Design: Experience architecting safe clock-domain crossings (CDC) and reset-domain crossings using synchronizers, asynchronous FIFOs, and controlled reset sequencing.
  • Implementation Analysis: Ability to analyze timing and resource reports to resolve critical paths, routing delays, congestion, and high fanout, while balancing throughput, latency, and area trade‑offs.
  • Register-Level Software: Basic C programming and MMIO register-access skills for low-level hardware debugging.
  • Tools & Automation: Practical proficiency with FPGA implementation toolchains, Tcl or Python scripting for build automation, and Git version control.
Preferred Exposure (Nice to Have)
  • Platform Tools: Experience with AMD Vivado implementation and debug flows (XDC/SDC constraints, design checkpoints, implementation strategies, and on-chip debug tools like ILA/VIO).
  • Dynamic Reconfiguration: Exposure to partial reconfiguration and nested Dynamic Function eXchange (DFX), including Pblock planning, partition interfaces, isolation, and configuration compatibility.
  • Datapath Optimization: Experience optimizing FPGA datapaths via DSP mapping, wide arithmetic, memory banking, and scheduling.
  • High-Speed Interfaces: Hands-on experience with PCIe or DDR integration, board bring-up, and peripheral-driver development.
  • Advanced Flows: Familiarity with incremental builds, configuration-image automation, automated CDC/RDC analysis, formal checks, and power/thermal estimation.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Rtl Design Engineer
Rtl Design Engineer

HC Robotics • Kolkata, Hyderabad

On-site
INR 1,200,000 - 1,800,000
Technical Lead – FPGA/RTL Design
Technical Lead – FPGA/RTL Design

CoreEL Technologies • Bengaluru

On-site
INR 1,500,000 - 2,500,000
FPGA RTL Design Engineer
FPGA RTL Design Engineer

UST • Bengaluru

On-site
INR 1,200,000 - 2,100,000
Fpga Design Engineer
Fpga Design Engineer

Coreel Technologies • Bengaluru

On-site
INR 900,000 - 1,300,000
Lead/Manager RTL Design
Lead/Manager RTL Design

Sanlayan • Bengaluru

On-site
INR 3,000,000 - 5,000,000
Fpga Design Engineer
Fpga Design Engineer

HCL Technologies Limited • Chennai District, Bengaluru

On-site
INR 3,500,000 - 7,000,000
FPGA Engineer
FPGA Engineer

Cortex Consultants LLC • Hyderabad

On-site
INR 1,200,000 - 1,800,000
ASIC/SOC - FPGA Engineer
ASIC/SOC - FPGA Engineer

ACL Digital • Hyderabad

On-site
INR 1,200,000 - 1,800,000
Senior FPGA Design Engineer
Senior FPGA Design Engineer

CoreEL Technologies • Bengaluru

On-site
INR 1,200,000 - 1,500,000
FPGA RTL Designer
FPGA RTL Designer

Greytip Software Private Limited • Bengaluru

On-site
INR 1,200,000 - 1,800,000