Job Title: ASIC / SoC FPGA Design & Prototyping Engineer
Experience: 36 Years (adjust bracket as needed)
Employment Type: Full-Time / Contract
Role Overview
We are seeking a hands-on ASIC/SoC FPGA Design & Prototyping Engineer to drive RTL adaptation, FPGA mapping, timing closure, and hardware prototyping for complex ASIC/SoC subsystems. The ideal candidate will have deep proficiency in the AMD/Xilinx toolchain (Vivado, Vitis, Petalinux) and extensive experience porting ASIC RTL onto Xilinx UltraScale+ / Versal platforms to enable pre-silicon validation, firmware development, and system bring-up.
Key Responsibilities
- ASIC-to-FPGA Porting & RTL Design: Adapt, partition, and optimize ASIC/SoC RTL (Verilog / SystemVerilog) for FPGA prototyping targets, including memory compilation, gated-clock conversion, and ASIC-to-FPGA IP replacement.
- AMD/Xilinx Implementation & Timing Closure: Execute synthesis, place-and-route, static timing analysis (STA), and timing closure using AMD/Xilinx Vivado, writing and maintaining XDC timing constraints and CDC/RDC sign-off.
- SoC Integration & Prototyping Platforms: Integrate processor subsystems (ARM Cortex-A/R, MicroBlaze), AXI interconnects, DMAs, and high-speed peripherals on Xilinx Zynq UltraScale+ MPSoC, Virtex UltraScale+, or Versal Adaptive SoC platforms.
- Board Bring-Up & Hardware Debugging: Perform prototype board bring-up, bitstream generation, and real-time hardware debugging using Vivado Logic Analyzer (ILA/VIO), JTAG, oscilloscopes, and protocol analyzers.
- Pre-Silicon Validation & Firmware Enablement: Deliver stable FPGA prototypes to firmware, software, and DV teams for early driver bring-up, HW/SW co-verification, and system-level performance testing.
- Build & Regression Automation: Develop and maintain automated build, synthesis, and regression scripts using Tcl, Python, and Shell/Make.
- Documentation & Cross-Functional Coordination: Author FPGA user guides, memory maps, pinout/interface specifications, and bring-up reports; collaborate closely with ASIC RTL, Physical Design, DV, Board Hardware, and Embedded Software teams.
Required Qualifications
- B.E./B.Tech or M.E./M.Tech in Electronics & Communication, Electrical Engineering, VLSI, or Computer Engineering.
- 3–6 years of hands-on experience in FPGA Design, ASIC/SoC Prototyping, or Emulation.
- Strong proficiency in Verilog and SystemVerilog for RTL design and integration.
- Deep, hands-on expertise with AMD/Xilinx tools: Vivado Design Suite (IP Integrator, Synthesis, Implementation, STA, ILA/VIO) and Vitis / Xilinx SDK.
- Proven track record working with Xilinx UltraScale / UltraScale+ (Virtex, Kintex, Zynq MPSoC) or Versal device families.
- Solid understanding of AMBA protocols (AXI4, AXI-Lite, AXI-Stream, AHB/APB) and standard interfaces such as DDR4/LPDDR4, PCIe, Ethernet, USB, SPI, I2C, and UART.
- Hands-on experience with Static Timing Analysis (STA), Clock Domain Crossing (CDC), and resolving multi-clock timing violations.
- Proficiency in Tcl and Python scripting for Vivado flow automation.
Preferred Qualifications
- Experience with multi-FPGA partitioning and commercial prototyping platforms (e.g., Synopsys HAPS / ProtoCompiler, Siemens Veloce, or custom multi-Virtex boards).
- Familiarity with PetaLinux, device tree configuration, and embedded Linux boot flows (FSBL, U-Boot) on Zynq MPSoC / Versal.
- Exposure to simulation and formal/lint tools (Questa/ModelSim, VCS, SpyGlass).
- Experience reading board schematics and collaborating with PCB hardware engineers during custom FPGA carrier/motherboard bring-up.
Desired Soft Skills
- Strong analytical and root-cause debugging mindset across hardware/RTL/firmware boundaries.
- Ability to work independently in a fast-paced pre-silicon schedule and communicate clearly across global engineering teams.