I&C Commissioning Engineer (Power Plants)

PGESCO

Riyadh

On-site

SAR 320,000 - 520,000

Full time

18 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

PGESCO seeks an experienced I&C/DCS engineer to lead field verification and recommissioning at a Saudi CCGT power plant. You will audit field instrumentation, alarms, HMIs, and SAP/CMMS tagging, ensuring accurate As-Built records and robust control narratives.

Ideal candidate has a Bachelor's in Instrumentation & Control, Electronics, or Electrical Eng, with 7–10 years in power plant I&C maintenance, commissioning, and DCS engineering, and hands-on experience with Yokogawa CENTUM VP, Siemens

Qualifications

  • Bachelor’s degree in Instrumentation & Control, Electronics, or Electrical Engineering.
  • 7 to 10 years of experience in power plant I&C maintenance, commissioning, and DCS engineering. Having completed at least 1 CCGT power plant is a must.
  • Hands-on experience with major power plant DCS platforms and field instrumentation.
  • Ability to read and modify control logic diagrams, P&IDs, loop drawings, and cause-and-effect matrices.
  • Familiarity with ISA-18.2 alarm management, PID loop tuning, KKS tagging, and SAP/CMMS integration.

Responsibilities

  • Conduct field walkdowns of transmitters, valves, analyzers, panels, boxes, and DCS cabinets against P&IDs and datasheets to establish As-Built records.
  • Troubleshoot instrumentation, communication failures, and loop instabilities during normal operation.
  • Maintain a uniform log of master markup of all As-Built records.
  • Act as single point of contact for I&C troubleshooting and related markup records.
  • Lead team members in workload balancing, assignment, verification of outputs, mentoring, training.
  • Maintain up-to-date reporting system.
  • Devise, coordinate and supervise testing schemes to ensure connectivity of I&C equipment with minimal disruptions.
  • Audit and validate DCS narratives, interlocks, SPOF vulnerabilities, redundancy, and HSBT interfaces.
  • Support DCS upgrades including HMI updates, alarm rationalization, SOE timestamping, and KPI reporting.
  • Prepare technical specifications, instrument datasheets, and BOQs; evaluate vendor bids.
  • Supervise I&C contractors during installation, calibration, and commissioning tests.
  • Audit and install KKS/instrument tags across field devices and panels; populate SAP/CMMS records.

Skills

I&C maintenance
DCS engineering
Power plant experience
Field instrumentation
PID loop tuning
Alarm management
KKS tagging
SAP/CMMS integration
Reading P&IDs
Vendor bid evaluation

Education

Bachelor's degree in Instrumentation & Control, Electronics, or Electrical Engineering

Tools

Yokogawa CENTUM VP
Siemens SPPA-T3000
Emerson Ovation
ABB DCS
GE Mark VIe

Job description

Leads field verification, control logic validation, troubleshooting, and system recommissioning for Instrumentation & Control (I&C) and Distributed Control Systems (DCS) in a Combined Cycle Gas Turbine (CCGT) power plant. Familiar with power plants design and rationale behind process control and automation. Audits field instrumentation and control loops for as-built accuracy, diagnoses out-of-service or malfunctioning instruments and control logic, and supports management across specialized DCS/control adjustment scopes, including logic optimization, alarm management, HMI graphics, historian/SOE configuration, procurement, calibration, and SAP/KKS tagging.

Key Responsibilities:
  • Conduct physical walkdowns of field transmitters, control valves, analyzers, local panels, junction boxes, and DCS/PLC cabinets, cross-checking field installations against P&IDs, loop diagrams, hookup drawings, datasheets, wiring/termination diagrams, I/O lists, and instrument indexes to establish verified "As-Built" records.
  • Troubleshoot faulty instrumentation, communication failures, and control loop instabilities in normal plant operation, assessing out-of-service sensors, actuators, and I/O modules to determine repair, recalibration, or replacement needs.
  • Maintains a uniform log of master markup of all “As-Built” records.
  • Acts as single point of contact to I&C related troubleshooting, verification and related markup records.
  • Ability to lead other team members in areas of workload balancing, assignment, verification of outputs, mentoring, training.
  • Ability to maintain up to date reporting system.
  • Ability to devise, coordinate and supervise practical testing schemes to ensure connectivity of I&C equipment with minimal disruptions to the plant and absolute avoidance of shutdowns.
  • Audit and validate DCS control narratives, interlocks, sequences, Single Point of Failure (SPOF) vulnerabilities, controller/network redundancy, EDG auto-transfer logic, and High-Speed Bus Transfer (HSBT) control interfaces.
  • Support DCS upgrades and optimization, including HMI graphic updates, alarm rationalization (priority classification and suppression), Sequence of Events (SOE) timestamping, historical data archiving, automated KPI reporting, and control loop PID tuning.
  • Prepare technical specifications, instrument datasheets, and BOQs for replacement instruments, control valves, and DCS hardware/software, while evaluating vendor bids and supporting technical clarifications.
  • Supervise I&C contractors during instrument installation, impulse tubing, loop checking, calibration, and cold/hot commissioning, witnessing functional logic tests and SATs.
  • Audit and install physical KKS/instrument tags across field devices and panels, compiling complete calibration and nameplate inventories to populate and validate SAP/CMMS records.
Qualifications Required:
  • Bachelor’s degree in Instrumentation & Control, Electronics, or Electrical Engineering.
  • 7 to 10 years of experience in power plant I&C maintenance, commissioning, and DCS engineering. Having completed at least 1 CCGT power plant is a must.
  • Strong hands-on expertise in major power plant DCS platforms (e.g., Yokogawa CENTUM VP, Siemens SPPA-T3000, Emerson Ovation, ABB, GE Mark VIe), field instrumentation, and control valves.
  • Proven ability to read and modify control logic diagrams, P&IDs, loop drawings, and cause-and-effect matrices.
  • Practical familiarity with alarm management (ISA-18.2), PID loop tuning, KKS tagging, and SAP/CMMS integration.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrical Commissioning & Maintenance Engineer (Power Plants)
Electrical Commissioning & Maintenance Engineer (Power Plants)

PGESCO • Riyadh

On-site
SAR 300,000 - 460,000
Power Plant I&C & DCS Commissioning Lead
Power Plant I&C & DCS Commissioning Lead

PGESCO • Riyadh

On-site
SAR 320,000 - 520,000
Instrumentation and Control Engineer
Instrumentation and Control Engineer

Nawras Power Company • Eastern Province

On-site
SAR 150,000 - 210,000
Lead Engineering Manager - Control System
Lead Engineering Manager - Control System

Larsen & Toubro Limited • Riyadh

On-site
SAR 562,000 - 787,000
Instrument Engineer
Instrument Engineer

Confidentiel • Makkah Region

On-site
SAR 300,000 - 520,000
Control Engineer
Control Engineer

Renco Group • Riyadh

Remote
SAR 180,000 - 320,000
Instrumentation and Automation Control System Technician
Instrumentation and Automation Control System Technician

Optimal • Dhahran Compound

On-site
SAR 60,000 - 80,000
Lead Engineering Manager - Control Syste...
Lead Engineering Manager - Control Syste...

Larsen & Toubro Limited • Riyadh

On-site
SAR 900,000 - 1,200,000
Instrumentation Engineer
Instrumentation Engineer

Top Talent Recruitment • Northern Borders Province

On-site
SAR 260,000 - 480,000
Manager - Testing & Commissioning - PPC Specialist
Manager - Testing & Commissioning - PPC Specialist

L&T Hydrocarbon Engineering • Riyadh

On-site
SAR 240,000 - 360,000