OPERATOR (S-Site, Jelapang)

Carsem (M) Sdn. Bhd; Ipoh; In loco; MYR 22.000 - 39.000; Tempo pieno

Vantaggi offerti da questo lavoro

Medical

Education support

Dental

Parking

Medical for immediate family members

car subsidy

Descrizione del lavoro

Carsem (M) Sdn. Bhd is seeking a production operator to perform everyday manufacturing tasks ensuring output, quality and cycle times meet company targets. You will operate machines, document processes, inspect products, and address abnormalities to protect throughput.

The role requires basic computer skills, 1 year in electronics production, and strong teamwork. Training and SOP adherence are essential for safe, efficient operations at Ipoh plants.

Competenze

• Minimum 1 year experience in electronic production.
• Qualification: SPM/STPM or SKM.
• Basic computer skills.
• Good problem solving and attention to detail.
• Able to work in a team and follow instructions.
• Ability to respond quickly to problems.

Mansioni

• Operate production machines to run processes and report abnormalities.
• Record production documents to prevent issues and ensure machines are in good condition.
• Inspect finished products for quality and report abnormalities.
• Achieve cycle time and meet delivery requirements.
• Maintain a safe, clean work environment and follow SOP.
• Stop production if abnormalities are found.
• Guide and train new workers and be ready for training.

Conoscenze

Electronics production experience

Basic computer skills

Problem solving

Attention to detail

Teamwork

Instruction following

Quick decision making

Team attitude

Formazione

SPM/STPM or SKM

Descrizione del lavoro

This position is to carry out production tasks and ensure that they meet the company's objectives in terms of production output, quality and cycle time.

Key responsibilities

• Operate production machines to ensure the process runs correctly and produces desired results. When abnormal conditions occur during production, report to the supervisor.
• Record production documents (Traveller, Track In/Out, SPC), packaging and maintenance to prevent issues and ensure machines are in good condition.
• Inspect finished products for quality control to ensure production output meets established product standards. Report abnormalities for correction or damage prevention.
• Achieve cycle time and production process timing to ensure sufficient output meets delivery responsibilities and customer requirements.
• Report to superiors on daily activities and any matters affecting machines and production output.
• Maintain a safe, clean work environment and follow SOP.
• Stop the production process if any abnormalities are found during production activities.
• Help guide, explain thoroughly and monitor the progress of new workers. Be ready to receive training and latest exposure regarding equipment and production techniques.

About you

• Minimum 1 year experience in electronic production field
• SPM/STPM or SKM qualification
• Basic computer skills
• Problem solving ability
• Concentration and attention to detail
• Ability to work as a team
• Able to follow instructions and production schedules
• Able to act quickly when problems occur
• Good teamwork attitude

Consumer Electronics Manufacturing More than 10,000 employees

Carsem is a leading provider of turnkey packaging and test services to the semiconductor industry, and offers one of the widest range package & test portfolios in the world.

Founded in 1972, Carsem is among the most experienced companies in our industry and is recognized as one of the largest in unit volume production. We have over 6,000 employees and ship in excess of 100 million units each week and more than 65% of this volume is shipped as fully tested product. Carsem is a member of one of South East Asia's most successful corporations, the Hong Leong Group, who views semiconductors as a core business.

We have three high technology factories. Two are located in Ipoh, Malaysia, and a new third factory is located in Suzhou, China. The two factories in Malaysia, Carsem - M Site and Carsem - S Site, are 10 miles (16Km) apart. Ipoh is a 90 minute drive from Penang and 2.5 hours from Kuala Lumpur.

The factories are supported by extensive R&D and failure analysis staff and incorporate highly sophisticated, "state of the art" automated equipment, ensuring quality products which meet the exacting standards of all the automotive, telecom, computer and consumer goods industries. Both factories maintain world-class quality standards having achieved ISO/TS 16949, ISO-9001, ISO-14001 certifications and comply to the Sony Green Partner Program. They are supported with a global network of sales and technical support offices. The China factory, Carsem-Suzhou Ltd., is located in the province of Jiangsu, 50 miles (80Km) west of Shanghai. The new factory is 172K sq. ft. (16K sq. m.) and is on 645K sq. ft. (60K sq. m.) of land in the Suzhou Industrial Park. The construction was completed in January 2004, the staff has been through extensive training in Carsem's existing Malaysian factories and the assembly and test equipment to support the manufacture of the MLP (Micro Leadframe Package) Quad and Dual was installed during the second quarter of 2004. Customer qualifications were completed during the second quarter and the factory started shipping production volumes during the third quarter of 2004.

Product & Services

Product Groups Assembled at M Site: MLP MICRO I.C. PDIP (300/600 Mil), PLCC, SOIC (150Mil), MSOP (3.0mm), QSOP (150Mil) MICRO SOT 23, SOT66x, TSOT, SOT, TO92; SC 70 POWER TO220, DDPAK, SOT223 S Site

S Site commenced operations in April,1992. The factory has a total floor space of 384,000 sq. ft. (35,700 M2), a work force of 4,300 employees and the ability to expand by 270,000 sq. ft. (25,000 M2) in the future. Product Groups Assembled at S Site: MLP QUAD, DUAL ARRAY SSBGA, SSLGA, FTBGA, CBGA I.C. PDIP (300 Mil), PLCC, SOIC (150/300 Mil), QSOP (300 Mil), SSOP (5.3mm), TSSOP (4.4/ 6.1mm) QFP MQFP, LQFP, TQFP SiP System in Package

Other Information

VISION

"To be a World Class Company Offering Assembly, Test/Finishing Solutions to Semiconductor Companies Throughout the World"

MISSION

"Carsem will Continue to show Profitable Growth with Emphasis on Employee Development and Operational and Service Indices to Ensure that we are the Employer Of Choice and Supplier Of Choice"

QUALITY

Carsem's policy is to provide products and services of the highest quality through "ZERO DEFECTS TODAY!", preventive Quality culture. Employees will act with honesty, sincerity and operate as a team to continuously strive for improvements in quality, productivity, delivery, services and cost in order to be competitive and profitable. ZERO DEFECTS QUALITY is the responsibility of every employee.

PERSONAL DATA PROTECTION

The Hong Leong Group use personal data in accordance with the Hong Leong Group Privacy Notice for new applicants which can be found (http://www.hongleong.com.my).

Carsem is a leading provider of turnkey packaging and test services to the semiconductor industry, and offers one of the widest range package & test portfolios in the world.

Founded in 1972, Carsem is among the most experienced companies in our industry and is recognized as one of the largest in unit volume production. We have over 6,000 employees and ship in excess of 100 million units each week and more than 65% of this volume is shipped as fully tested product. Carsem is a member of one of South East Asia's most successful corporations, the Hong Leong Group, who views semiconductors as a core business.

We have three high technology factories. Two are located in Ipoh, Malaysia, and a new third factory is located in Suzhou, China. The two factories in Malaysia, Carsem - M Site and Carsem - S Site, are 10 miles (16Km) apart. Ipoh is a 90 minute drive from Penang and 2.5 hours from Kuala Lumpur.

The factories are supported by extensive R&D and failure analysis staff and incorporate highly sophisticated, "state of the art" automated equipment, ensuring quality products which meet the exacting standards of all the automotive, telecom, computer and consumer goods industries. Both factories maintain world-class quality standards having achieved ISO/TS 16949, ISO-9001, ISO-14001 certifications and comply to the Sony Green Partner Program. They are supported with a global network of sales and technical support offices. The China factory, Carsem-Suzhou Ltd., is located in the province of Jiangsu, 50 miles (80Km) west of Shanghai. The new factory is 172K sq. ft. (16K sq. m.) and is on 645K sq. ft. (60K sq. m.) of land in the Suzhou Industrial Park. The construction was completed in January 2004, the staff has been through extensive training in Carsem's existing Malaysian factories and the assembly and test equipment to support the manufacture of the MLP (Micro Leadframe Package) Quad and Dual was installed during the second quarter of 2004. Customer qualifications were completed during the second quarter and the factory started shipping production volumes during the third quarter of 2004.

Product & Services

Product Groups Assembled at M Site: MLP MICRO I.C. PDIP (300/600 Mil), PLCC, SOIC (150Mil), MSOP (3.0mm), QSOP (150Mil) MICRO SOT 23, SOT66x, TSOT, SOT, TO92; SC 70 POWER TO220, DDPAK, SOT223 S Site

S Site commenced operations in April,1992. The factory has a total floor space of 384,000 sq. ft. (35,700 M2), a work force of 4,300 employees and the ability to expand by 270,000 sq. ft. (25,000 M2) in the future. Product Groups Assembled at S Site: MLP QUAD, DUAL ARRAY SSBGA, SSLGA, FTBGA, CBGA I.C. PDIP (300 Mil), PLCC, SOIC (150/300 Mil), QSOP (300 Mil), SSOP (5.3mm), TSSOP (4.4/ 6.1mm) QFP MQFP, LQFP, TQFP SiP System in Package

Other Information

VISION

"To be a World Class Company Offering Assembly, Test/Finishing Solutions to Semiconductor Companies Throughout the World"

MISSION

"Carsem will Continue to show Profitable Growth with Emphasis on Employee Development and Operational and Service Indices to Ensure that we are the Employer Of Choice and Supplier Of Choice"

QUALITY

Carsem's policy is to provide products and services of the highest quality through "ZERO DEFECTS TODAY!", preventive Quality culture. Employees will act with honesty, sincerity and operate as a team to continuously strive for improvements in quality, productivity, delivery, services and cost in order to be competitive and profitable. ZERO DEFECTS QUALITY is the responsibility of every employee.

PERSONAL DATA PROTECTION

The Hong Leong Group use personal data in accordance with the Hong Leong Group Privacy Notice for new applicants which can be found (http://www.hongleong.com.my).

Perks and benefits

• Medical
• Education support
• Dental
• Parking
• Medical for immediate family members
• car subsidy