Senior CNC & VMC Programmer

Vortex Engineering Works India Pvt. Ltd.; Akola District; On-site; INR 900,000 - 1,300,000; Full time

Job summary

VEWIPL seeks a Senior CNC & VMC Programmer to lead end-to-end programming, setup, and process optimization for precision components. You will work with 2D/3D CAM (MasterCAM) and legacy G/M codes on FANUC controls, ensuring first-article accuracy and smooth production flow.

Role demands strong GD&T literacy, drawing interpretation, and collaboration with Design, Quality, and Planning teams to drive NPD support and continuous improvement in a busy shop floor.

Qualifications

• ITI/ Diploma/ BE background with hands-on CNC/VMC programming
• Experience in reading engineering drawings and GD&T symbols
• ISO 9001 environment exposure is preferred

Responsibilities

• Develop and verify CNC/VMC programs for turning and milling operations.
• Set up first articles, fixtures, tool offsets, and zero points with tight process control.
• Optimize programs to reduce cycle times and tool wear while maintaining surface quality.
• Document logs, tool life, and program revisions per ISO standards.

Skills

CNC turning

VMC programming

G-code & M-code

MasterCAM

GD&T knowledge

Reading drawings

Education

ITI (Turner/Fitter)

Diploma in Mechanical Engineering

BE/B.Tech (advantage)

Tools

MasterCAM

FANUC

Job description

POSITION SUMMARY

We are seeking an experienced and technically proficient Senior CNC & VMC Programmer to join our Production team at VEWIPL, Dombivali East. The candidate will be responsible for end‑to‑end CNC/VMC programming (2D and 3D), setup, and process optimisation for the manufacture of precision‑engineered components including housings, rotors, armature plates, and other electromechanical sub‑assemblies.

KEY RESPONSIBILITIES

CNC & VMC Programming

• Develop, write, and verify CNC/VMC programs using manual G‑code and M‑code as well as CAM software (MasterCAM or similar).
• Carry out both 2D and 3D programming for complex component profiles including milling, drilling, boring, tapping, and contouring operations.
• Load, test, and dry‑run programs on machines before live machining; troubleshoot and debug program errors.
• Maintain a structured program library (DNC/server) with version control and revision history.

Machine Setup & Operation

• Perform first‑article setup including job clamping, fixture alignment, tool offsets, and zero‑point setting.
• Select appropriate cutting tools, inserts, holders, and fixtures based on material grade and required surface finish (Ra value).
• Establish and document optimal cutting parameters — spindle speed (RPM), feed rate, depth of cut, coolant type — for different materials including MS, CI, EN series steels, aluminium, brass, and stainless steel.
• Perform in‑process and final inspection using precision instruments (Vernier calliper, micrometer, bore gauge, CMM if available).

Process Optimisation & NPD Support

• Optimise existing programs to reduce cycle time, minimise tool wear, and improve surface quality.
• Support New Product Development (NPD) by programming first‑off components from customer drawings and CAD models.
• Propose improvements in fixturing, tooling selection, and machining sequence to enhance productivity and reduce rejections.
• Co‑ordinate with Design, Quality, and Production planning teams on DFM (Design for Manufacturability) inputs.

Documentation & Compliance

• Maintain daily machine reports, program change logs, and tool life records as per ISO 9001 requirements.
• Adhere to 5S, Kaizen, and TPM practices on the shop floor.
• Follow all safety protocols including PPE usage, lockout‑tagout (LOTO), and machine guarding procedures.

REQUIRED SKILLS & COMPETENCIES

Technical Skills:

• Proficient in CNC turning (CNC lathe) and VMC (Vertical Machining Centre) programming and setup.
• Strong knowledge of 2D and 3D CAM programming — experience with MasterCAM preferred.
• Sound understanding of G‑codes, M‑codes, and machine controller platforms (FANUC or similar).
• Knowledge of cutting tool geometry, tool material grades (HSS, Carbide, Ceramic), coatings, and their suitability for different workpiece materials.
• Ability to read and interpret engineering drawings, GD&T symbols, and 3D CAD models.
• Familiarity with surface finish standards and measuring techniques (Ra, Rz).
• Knowledge of materials commonly used in precision engineering: MS (Mild Steel), EN8, EN24, CI (Cast Iron), Aluminium alloys, Brass, SS 304/316.

Soft Skills:

• Ability to train and guide junior operators/setters on the shop floor.
• Systematic and documentation‑oriented approach — essential for ISO compliance.
• Good time management and ability to handle multiple jobs/priorities simultaneously.
• Team player with clear communication to coordinate with Design, QC, and Planning teams.

QUALIFICATION & EXPERIENCE

• Minimum qualification: ITI (Turner / Machinist / Fitter) from a recognised board OR Diploma in Mechanical Engineering.
• BE/B.Tech in Mechanical Engineering is an advantage but not mandatory if the candidate has strong hands‑on experience.
• Minimum 10 years of hands‑on CNC and VMC programming experience in a precision engineering / auto ancillary / electromechanical manufacturing environment.
• Experience in programming batch‑production as well as low‑volume, high‑variety (LVHV) components.
• Prior exposure to ISO 9001‑certified manufacturing environments preferred.