PART-TIME CASUAL FIELD EMC ENGINEER

SGS

Georgia

On-site

USD 55,000 - 69,000

Part time

7 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

401(k) match
Paid time off
Tuition reimbursement

Job summary

SGS is seeking a part-time field EMC tester to conduct on-site EMC evaluations and testing across customer facilities. The role requires independent field execution, sound engineering judgment, and precise reporting.

You will plan and perform emissions and immunity tests, review specifications, and maintain calibration and safety procedures while traveling domestically as project demands. This is a part-time casual position with variable hours.

Qualifications

  • Associate degree in Electrical Engineering Technology, Electronics Engineering Technology, RF Engineering, or a related field with at least 2 years EMC/RF/test experience; or
  • Technical degree or equivalent training with at least 5 years EMC/RF/test experience.
  • Hands-on EMC measurements experience and ability to read electrical drawings and test procedures.
  • Willingness and ability to travel within the United States and internationally as required.

Responsibilities

  • Conduct field EMC emissions and immunity evaluations on various equipment at customer sites.
  • Review drawings, test plans, and site information to confirm scope and readiness.
  • Prepare field test plans, equipment lists, and travel estimates as needed.
  • Set up and operate portable EMC instrumentation and related gear.
  • Perform emissions and immunity testing per applicable standards (FCC, CISPR, IEC).
  • Document configurations, deviations, and results for repeatable reporting.
  • Communicate observations professionally and develop accurate field notes and reports.

Skills

EMC testing
Field work
Reading schematics
Safety awareness

Education

Associate degree in EET/RF engineering tech
Hands-on EMC/RF experience

Tools

Spectrum analyzers
EMI receivers
RF signal generators
Antennas
Current probes
LISNs
ESD simulators
Oscilloscopes
Field-strength probes

Job description

SGS is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With over 97,000 employees in 130 countries and operating a network of more than 2,400 offices and laboratories, we provide services to almost every industry by assuring quality and safety of products and services.

Trusted all over the world, SGS is a market leader because we put 100% passion, pride and innovation into everything we do. We encourage new ideas. We welcome people who challenge the way we do things. And we will be 100% committed to helping you reach your full potential.

Position Summary

Conduct on-site electromagnetic compatibility (EMC) evaluations and testing of equipment at customer facilities and other field locations. Plan, execute, document, and communicate field EMC projects in accordance with approved methods, customer requirements, applicable standards, and internal quality and integrity requirements. This casual role is scheduled according to project demand and requires independent field execution, sound engineering judgment, and accurate technical reporting.

Primary Responsibilities
  • Conduct field EMC emissions and immunity evaluations on industrial, commercial, medical, information technology, and other electrical or electronic equipment, as assigned.
  • Review customer drawings, specifications, test plans, product documentation, and site information before mobilization to confirm scope, configurations, interfaces, power requirements, and test readiness.
  • Prepare field test plans, equipment lists, connection diagrams, site prerequisites, schedules, and travel or expense estimates when requested.
  • Set up and operate portable EMC instrumentation, antennas, probes, coupling devices, transient generators, and monitoring equipment in accordance with approved procedures and equipment instructions.
  • Perform applicable conducted and radiated emissions measurements and immunity testing, which may include electrostatic discharge, radiated RF immunity, electrical fast transient/burst, surge, conducted RF immunity, voltage dips and interruptions, and power-frequency magnetic field testing.
  • Apply applicable requirements from customer-specified standards and methods, which may include FCC regulations, ANSI C63 methods, CISPR standards, IEC 61000-4 series basic immunity standards, and relevant product-family or product standards.
  • Control and document test configurations, operating modes, cable arrangements, auxiliary equipment, environmental conditions, deviations, anomalies, and equipment used to support repeatable and defensible results.
  • Identify test issues, equipment malfunctions, unsafe conditions, and data-quality concerns; pause work when necessary and escalat[e] to the responsible technical authority.
  • Communicate preliminary observations professionally to customers while avoiding unsupported compliance conclusions before technical review is complete.
  • Prepare clear, accurate field notes, data records, photographs, plots, and technical reports within established time frames.
  • Maintain calibration status, verify pre-use condition, safeguard assigned equipment, and report damage or service needs promptly.
  • Schedule and execute travel efficiently to meet project commitments while controlling travel time and expenses.
  • Submit time, travel, expense, and project documentation accurately and promptly.
  • Perform work in a professional manner aligned with the SGS Integrity Policy and applicable internal standards, quality procedures, safety requirements, and customer site rules.
  • Perform other duties as assigned or required.
Required Education and Experience
  • Associate degree in Electrical Engineering Technology, Electronics Engineering Technology, RF Engineering, or a related technical field, with at least 2 years of relevant EMC, RF, electronics, compliance, or test experience; or
  • Technical degree, military technical training, recognized apprenticeship, or equivalent training with at least 5 years of relevant EMC, RF, electronics, compliance, or test experience.
  • Hands‑on experience performing EMC measurements or troubleshooting electrical and electronic equipment.
  • Ability to read electrical schematics, wiring diagrams, equipment drawings, specifications, and test procedures.
  • Ability to travel within the United States and, when assigned, outside the United States. Project demand and travel frequency may vary.
Preferred Qualifications
  • Bachelor’s degree in electrical engineering, electronics engineering, physics, or related discipline.
  • Experience with field or laboratory testing to FCC Part 15 or Part 18, ANSI C63.4, CISPR 11, CISPR 32, IEC 61000-4 series, IEC 61326‑1, IEC 60601‑1‑2, or comparable EMC standards.
  • Experience with EMC troubleshooting, including source identification, cable and grounding assessment, shielding evaluation, filtering, and corrective‑action verification.
  • Experience working within an ISO/IEC 17025 laboratory quality system or other controlled test environment.
Skills and Competencies
  • Excellent written and verbal communication skills, sound customer‑facing judgment, and the ability to explain technical findings clearly.
  • High attention to detail and disciplined control of test configurations, data, records, photographs, and report content.
  • Ability to work independently at customer sites while collaborating effectively with remote technical reviewers, project coordinators, laboratory personnel, and customers.
  • Ability to prioritize multiple assignments, meet deadlines, and adapt to changing site conditions and project scope.
  • Proficiency with Microsoft Word and Excel and the ability to learn internal project, reporting, and expense systems.
  • Working knowledge of EMC test instruments and accessories such as spectrum analyzers or EMI receivers, RF signal generators and amplifiers, antennas, current probes, line impedance stabilization networks, transient generators, ESD simulators, power analyzers, oscilloscopes, and field‑strength probes.
  • Ability to recognize electrical, RF, mechanical, environmental, and customer‑site hazards and follow established stop‑work and escalation requirements.
  • Ability to interpret specifications and apply approved methods without compromising safety, data integrity, or compliance requirements.
Work Conditions and Physical Demands
  • Frequent travel to customers and project sites; assignments may include early starts, extended days, overnight stays, and work in active industrial environments.
  • Frequent standing, walking, moving through equipment areas, and positioning test cables and instruments.
  • Occasional climbing, balancing, stooping, kneeling, crouching, or crawling, subject to site safety controls.
  • Frequent use of hands for instrument setup, cable connections, computer entry, and equipment handling.
  • Ability to communicate effectively in person, by telephone, and through hearing protection where permitted by site rules.
  • Occasional lifting, carrying, pushing, or pulling of equipment cases weighing up to 30 pounds; heavier equipment must be handled with appropriate assistance or lifting controls.
  • Ability to wear required personal protective equipment and comply with customer‑specific safety and access requirements.
Additional Information
  • This is a part‑time casual position. Work hours are not guaranteed and will be scheduled based on project demand, employee availability, qualifications, and geographic fit.
  • Any offer, hourly rate, overtime eligibility, benefit eligibility, travel reimbursement, and employment terms are subject to HR review and applicable company policy.
  • Required technical training, method authorization, and equipment competency must be completed before independent assignment to cover test activities.
  • Reasonable accommodations may be available for qualified individuals, consistent with applicable law and the essential functions of the position.
Compensation

The expected salary for this position is $40.00 to $50.00 per hour This range represents the minimum and maximum base salary we reasonably expect to pay for this role. Actual compensation within the range will depend on skills, experience, and qualifications.

Our Benefits

We care about your total well‑being and will support you with the following, subject to your location and role.

  • Wealth:In addition to base pay, we offer 401(k) with company match (immediate vesting upon enrollment).
  • Happiness:
    • Professional Growth:Online training courses, virtual and classroom development experiences, tuition reimbursement program
    • Work‑Life Balance:Paid‑time off and family leave

In compliance with applicable state and local pay transparency laws, we provide clear and equitable compensation information for all applicants.

Position anticipated to close December 28, 2026.

Additional information

SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required.

This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company’s rights to assign or reassign duties and responsibilities to this job at any time.

If you are applying for a position within the United States and you have difficulty completing the on‑line employment application because of a disability, please call 201‑508‑3149 for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

PART-TIME CASUAL FIELD EMC ENGINEER
PART-TIME CASUAL FIELD EMC ENGINEER

SGS • Suwanee (GA)

On-site
USD 55,000 - 69,000
401(k) with company match
Tuition reimbursement program
Paid time off and family leave
Parttime Field Evaluation Engineer
Parttime Field Evaluation Engineer

SGS • Suwanee (GA)

On-site
USD 55,000 - 69,000
Field Evaluation Engineer: Safety Testing & Field Reports
Field Evaluation Engineer: Safety Testing & Field Reports

SGS • Suwanee (GA)

On-site
USD 55,104 - 68,880
Medical, dental and vision insurance
401(k) with company match
Tuition reimbursement program
+2
Part-time Field Evaluation Engineer
Part-time Field Evaluation Engineer

SGS • Suwanee (GA)

On-site
USD 55,104 - 68,880
Medical, dental and vision insurance
401(k) with company match
Tuition reimbursement program
+2
Part-Time Quality & Compliance Inspector (Engineering)
Part-Time Quality & Compliance Inspector (Engineering)

SGS • BLOOMINGTON (MN)

On-site
USD 34,000 - 48,000
401(k) with company match
Tuition reimbursement
Online training courses
Part-Time Engineering Compliance Inspector
Part-Time Engineering Compliance Inspector

SGS • BLOOMINGTON (MN)

On-site
USD 34,000 - 48,000
401(k) with company match
Tuition reimbursement
Online training courses
Project Engineer - General Safety & NRTL Certification
Project Engineer - General Safety & NRTL Certification

SGS • Suwanee (GA)

On-site
USD 75,000 - 90,000
Health insurance
401(k) with company match
Tuition reimbursement
+1
Senior Field Evaluation Engineer (Remote, Travel-Heavy)
Senior Field Evaluation Engineer (Remote, Travel-Heavy)

SGS • Suwanee (GA)

Remote
USD 55,000 - 69,000
Health insurance
401(k) with company match
Tuition reimbursement
Senior Field Evaluation Engineer (Remote | Travel)
Senior Field Evaluation Engineer (Remote | Travel)

SGS • Suwanee (GA)

Remote
USD 55,000 - 69,000
Health insurance
Dental insurance
Vision insurance
+5
VP of Revenue, Connectivity & Products - NA
VP of Revenue, Connectivity & Products - NA

SGS • Milpitas (CA)

On-site
USD 120,000 - 161,000
Health insurance
401(k) match
Online training courses
+2