Mechanical Engineer (for pooling)

D.M. CONSUNJI, INC. (DMCI); Makati; On-site; PHP 670,000 - 1,004,000; Full time

Job summary

D.M. Consunji, Inc. (DMCI) is seeking a Mechanical & M&E Coordinator with at least 5 years in construction. You will prepare and update as-built drawings for fire sprinkler and mechanical systems, read plans, and prepare shop drawings and submittals. Coordinate with consultants, attend meetings, and assist in QA/QC inspections.

You will also manage RFIs, CVIs, SIs, and variations, monitor submittals, and support project turnover with accurate billing and procurement support.

Qualifications

• Reading plans and specifications accurately.
• Coordinating with consultants on technical concerns.
• Managing RFIs, CVIs and SIs
• Conducting QA/QC inspections and using ISO forms
• Preparing submittals and monitoring progress of RFIs/submittals
• Preparing minutes of meetings (technical and management)

Responsibilities

• Prepare and update as-built drawings for fire sprinkler and mechanical systems.
• Read and interpret plans and specifications.
• Prepare shop drawings/ISD/CSD.
• Review For Construction Drawings (FCD).
• Prepare RFIs/CVIs/SIs and submittals; monitor progress.
• Coordinate with subcontractors and suppliers; attend technical meetings.
• Witness testing and commissioning of M&E works; close-out of Non-Compliance Notices.
• Evaluate materials for procurement; prepare PRFs and PRS.
• Prepare cost proposals for variations; reconcile quantities.
• Prepare bill of quantities and bill of materials; pre-construction planning.

Skills

Plan reading

Specs interpretation

Consultant coordination

QA/QC inspection

RFI management

Submittal management

Job description

In charge of preparation of design and estimates for mechanical systems as required by the project.

JOB DESCRIPTION

1. Preparation and Update of As-built drawings:
   • Fire Sprinkler System
   • mechanical
2. Reading/interpretation of plans and specification
3. Preparations of shop drawings/ISD/CSD
4. Review of For Construction Drawing
5. Preparation of RFI’s/CVI/SI
6. Preparation of submittals
7. Monitoring of RFI’s and submittals
8. Monitoring and closing-out of Non Compliance Notices
9. Technical Evaluation of materials for procurement
10. Coordination of technical concerns with the consultants
11. Coordination implementation of FCD’s
12. Preparation of minutes of meeting (technical and management)
13. Inspection of materials delivered on site
14. Attending walk-thru with the Subcontractors
15. Witness testing and commissioning of M&E Works
16. Preparation of inspection checklist
17. Understanding of Contract Documents
18. Managing the works, technical preparation of correspondence to Subcontractors, Suppliers
19. Attend technical construction coordination meetings
20. Emphasis on good quality to promote possible repeat client
21. Conduct QA/QC inspection with required ISO forms
22. Conduct punch listing prior to turn-over:
    • elevator
    • HVAC
    • landscaping
    • interior finishes
23. Review and understanding of Contract Documents
24. Identifying potential contract variation based on issued document by the Owner’s Representative
25. Quantity and Cost Estimates for Variation Orders
26. Reconciliation of submitted variation orders (quantities)
27. Getting cost proposals/quotation from suppliers and subcontractor
28. Commercial Evaluation of Cost proposals and quotations
29. Preparation of PRFS and PRS
30. Review of subcontract agreement including its scope of works and BOQ
31. Preparation of DMCI progress billing
32. Evaluation of the submittal progress billing of trade contractors vs the actual accomplishment.
33. Evaluation of cost proposals for work variations submitted by subcontractors
34. Preparation of power and water consumption billing chargeable to other parties
35. Preparation of bill of quantities based on drawings/plans and specification
36. Preparation of bill of materials
37. Preparation of Pre-Construction planning per scope of work
38. Coordinate work program with interface with all other scope of work of the project
39. Coordination of Mechanical works only
40. Preparation of various schedule:
    • manpower
41. Monitoring progress of work and evaluation of work
42. Prepares Daily Activity Report
43. Manpower Monitoring
44. Equipment Monitoring
45. Preparation of documents for turning over project to project manager or client
46. Identification, monitoring, and close-out of balance of works
47. Compliance to Project Safety Programs
48. Implementation of safety and health plans of the project
49. Toolbox Meetings
50. Safety site Walk-Thru
51. All other items as directed by the Project Manager and/or Management

Experience: With at least 5 years experience in the construction industry