Process Engineer - Industrialisation

SolydEra Group; Pergine Valsugana; In loco; EUR 35.000 - 45.000; Tempo pieno

Descrizione del lavoro

SolydEra S.p.A. in Italy is seeking a Process Engineer to design, industrialise and validate manufacturing processes for SOFC cells and stacks, driving improvements in yield, quality, cycle time and cost on the production floor.

You will define process parameters, lead validation and NPI activities, and own process documentation and equipment specifications in collaboration with R&D, Production, Quality, Maintenance and Supply Chain.

Competenze

• Degree in Mechanical, Chemical, Materials, Industrial or Manufacturing Engineering.
• 3–7 years of experience as Process Engineer, Manufacturing Engineer, Industrialisation Engineer or in a comparable production environment.
• Experience in technology-intensive manufacturing environments such as fuel cells, advanced ceramics, batteries, electronics, semiconductor, automotive or medical devices.
• Proven experience in process validation, NPI and production ramp-up.
• Practical knowledge of PFMEA, Control Plans, DOE, SPC and Cp/Cpk.
• Experience with equipment specification, commissioning and qualification, including FAT/SAT and IQ/OQ/PQ.
• Knowledge of Lean Manufacturing, Six Sigma and structured problem solving; Green Belt certification is a plus.
• Knowledge of measurement and inspection methods, technical drawings and GD&T.
• Good command of Excel and data analysis; familiarity with ERP or manufacturing execution systems is a plus.
• Understanding of ISO 9001 and HSE requirements in a manufacturing environment.
• Fluent English required; Italian highly preferred.
• Experience in SOFC, ceramic processing or technology transfer is a plus.

Mansioni

• Design, develop and industrialise manufacturing processes, defining process parameters, operating windows, tolerances and capability requirements.
• Lead process validation, including DOE, pre-series and qualification runs, and prepare validation documentation.
• Support NPI and technology transfer from development to production, providing manufacturing input to R&D and ensuring Design for Manufacturability.
• Define and maintain process documentation, including process specifications, work instructions, control plans, process flows, SOPs and PFMEA.
• Define technical requirements for equipment, tooling and automation, supporting supplier selection, commissioning and qualification, including FAT/SAT and IQ/OQ/PQ.
• Monitor process performance through FPY, scrap, cycle time, OEE and Cp/Cpk, using data analysis and statistical process control to identify and resolve deviations.
• Lead root cause analysis and corrective actions using 8D, 5-Why and Ishikawa.
• Drive continuous improvement using Lean, Kaizen and Six Sigma principles to improve efficiency and reduce scrap, downtime, lead time and cost.
• Provide technical support to Production, support process stabilisation and train operators on process requirements and controls.
• Support capacity planning, layout, material flow, supplier qualification and process audits.
• Prepare process documentation for technology and process transfer to other production sites, partners or Group entities.
• Report process performance, project progress and technical risks to the Head of Industrialisation.

Conoscenze

Fluent English

Excel & data analysis

Lean Manufacturing

Six Sigma

Problem solving

Formazione

Mechanical, Chemical, Materials, Industrial or Manufacturing Engineering

Strumenti

PFMEA

Control Plans

DOE

SPC

Cp/Cpk

ERP

MES

Descrizione del lavoro

SolydEra is a leading international player in solid oxide technology, developing and manufacturing cells, stacks, modules and solutions for efficient power generation and hydrogen production. Its technology platform operates in fuel cell, electrolysis and reversible modes, supporting applications across distributed power, industrial energy, data centres, critical infrastructure and hydrogen. With more than two decades of experience, automated manufacturing capabilities and around 200 employees, SolydEra combines multidisciplinary expertise across R&D, engineering, manufacturing and commercial activities in Italy, Switzerland and Australia, supporting the industrialization and deployment of solid oxide technology at scale.

Job Purpose

The Process Engineer is responsible for the design, industrialisation, validation and continuous improvement of manufacturing processes for SOFC cells and stacks.

The role defines process parameters and specifications, supports equipment and tooling qualification, and contributes to the ramp-up from pilot to serial production. The Process Engineer drives improvements in yield, quality, cycle time and cost, acting as the technical owner of assigned manufacturing processes.

The role reports to the Head of Industrialisation and works closely with R&D, Production, Quality, Maintenance and Supply Chain.

Key Responsibilities

• Design, develop and industrialise manufacturing processes, defining process parameters, operating windows, tolerances and capability requirements.
• Lead process validation, including DOE, pre-series and qualification runs, and prepare validation documentation.
• Support NPI and technology transfer from development to production, providing manufacturing input to R&D and ensuring Design for Manufacturability.
• Define and maintain process documentation, including process specifications, work instructions, control plans, process flows, SOPs and PFMEA.
• Define technical requirements for equipment, tooling and automation, supporting supplier selection, commissioning and qualification, including FAT/SAT and IQ/OQ/PQ.
• Monitor process performance through FPY, scrap, cycle time, OEE and Cp/Cpk, using data analysis and statistical process control to identify and resolve deviations.
• Lead root cause analysis and corrective actions using 8D, 5-Why and Ishikawa.
• Drive continuous improvement using Lean, Kaizen and Six Sigma principles to improve efficiency and reduce scrap, downtime, lead time and cost.
• Provide technical support to Production, support process stabilisation and train operators on process requirements and controls.
• Support capacity planning, layout, material flow, supplier qualification and process audits.
• Prepare process documentation for technology and process transfer to other production sites, partners or Group entities.
• Report process performance, project progress and technical risks to the Head of Industrialisation.

Qualifications & Experience

• Degree in Mechanical, Chemical, Materials, Industrial or Manufacturing Engineering.
• 3–7 years of experience as Process Engineer, Manufacturing Engineer, Industrialisation Engineer or in a comparable production environment.
• Experience in technology-intensive manufacturing environments such as fuel cells, advanced ceramics, batteries, electronics, semiconductor, automotive or medical devices.
• Proven experience in process validation, NPI and production ramp-up.
• Practical knowledge of PFMEA, Control Plans, DOE, SPC and Cp/Cpk.
• Experience with equipment specification, commissioning and qualification, including FAT/SAT and IQ/OQ/PQ.
• Knowledge of Lean Manufacturing, Six Sigma and structured problem solving; Green Belt certification is a plus.
• Knowledge of measurement and inspection methods, technical drawings and GD&T.
• Good command of Excel and data analysis; familiarity with ERP or manufacturing execution systems is a plus.
• Understanding of ISO 9001 and HSE requirements in a manufacturing environment.
• Fluent English required; Italian highly preferred.
• Experience in SOFC, ceramic processing or technology transfer is a plus.

Personal Skills

• Analytical, data-driven and results-oriented approach.
• Hands-on attitude and willingness to work closely with Production and on the shopfloor.
• Strong organisational and problem-solving skills, with the ability to manage multiple priorities.
• Effective communication and collaboration across R&D, Production, Quality, Maintenance and Supply Chain.
• Proactive and resilient, comfortable working in a growing industrial environment.
• Strong integrity, confidentiality and safety awareness.

Working Conditions

The role is based in Pergine Valsugana (Trento), Italy, with regular presence on the production floor.

The position requires availability to travel, including international travel, as needed for production, supplier, technology transfer and other business activities.

Salary range:

€ 35.000 – € 45.000 gross annual salary (RAL), depending on the candidate's qualifications, experience and skills.

If you believe your profile and experience could bring significant value to Solydera, we encourage you to apply even if your expectations are outside the indicated range. We will assess each profile on a case-by-case basis.

Solydera is an equal opportunity employer. Hiring decisions are based on qualifications, merit and business needs. We do not discriminate on the basis of gender, age, disability, religion or belief, sexual orientation, ethnic or social origin, or any other status protected by applicable law, in accordance with EU Directives 2000/78/EC and 2006/54/EC.

By submitting your application, you acknowledge that your personal data will be processed by SolydEra S.p.A. for recruitment and selection purposes, in accordance with EU Regulation 2016/679 (GDPR) and applicable data protection legislation.

For further information on the processing of personal data and on your rights as a data subject, please refer to SolydEra’s Privacy Policy