Quality Manager

Swid Process Technologies Pvt. Ltd.

Pune

On-site

INR 1,500,000 - 2,100,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Swid Process Technologies Pvt. Ltd. in Pune hires a Quality Manager to own QA/QC from incoming material through installation, testing, commissioning and handover, with authority to reject non-conforming work.

You will lead quality plans, manage NCRs, supervise inspectors, coordinate with projects and supply chain, and ensure timely DWR and handover dossiers while maintaining safety and compliance with ISO 9001 standards.

Qualifications

  • Engineering degree or diploma in engineering (Electrical/Mechanical)
  • 7+ years in solar/EPC quality assurance and site inspection
  • Strong knowledge of drawings, materials, installation, testing, ITPs and NCR systems
  • Internal-auditor/ISO 9001 exposure preferred
  • Measurement/test-instrument, documentation and root-cause analysis skills
  • Independent judgment, clear reporting and frequent travel readiness

Responsibilities

  • Develop project quality plans, ITPs, checklists, acceptance criteria and document standards.
  • Deploy Quality Supervisors/Inspectors and define hold/witness points based on risk.
  • Review incoming materials, installation, testing, commissioning and handover dossiers.
  • Raise and control NCRs, analyse recurring defects and ensure root‑cause corrective action.
  • Audit project, stores, supplier and maintenance quality and report systemic risk.
  • Approve quality release, punch closure and completion documentation within authority.
  • Feed recurring issues to Engineering, Supply Chain, Projects and training systems.
  • Maintain and update the Daily Work Report (DWR) every working day with tasks, progress, results, pending actions, blockers and supporting evidence.

Skills

Quality assurance
Root-cause analysis
Documentation
Inspection
Independent judgment

Education

Engineering degree/diploma (Electrical/Mechanical)

Tools

ITP
NCR systems
ISO 9001

Job description

Designation

Quality Manager

Department

Operations

Reports To

Head Operations with independent escalation access to Managing Director / CEO

Direct Reports

Quality Inspector

Backup Coverage

Nominated experienced Quality Supervisor/Inspector; Head Engineer for technical clarification only

Role Purpose

Own and independently enforce quality assurance and control from incoming material through installation, testing, commissioning and handover, with authority to reject non-compliant work.

Job Description and Responsibilities
  • Develop project quality plans, ITPs, checklists, acceptance criteria and document standards.
  • Deploy Quality Supervisors/Inspectors and define hold/witness points based on risk.
  • Review incoming materials, installation, testing, commissioning and handover dossiers.
  • Raise and control NCRs, analyse recurring defects and ensure root‑cause corrective action.
  • Audit project, stores, supplier and maintenance quality and report systemic risk.
  • Approve quality release, punch closure and completion documentation within authority.
  • Feed recurring issues to Engineering, Supply Chain, Projects and training systems.
  • Maintain and update the Daily Work Report (DWR) every working day with tasks, progress, results, pending actions, blockers and supporting evidence.
Daily Modus Operandi
  • Review inspection requests, planned hold points, incoming material and open NCRs.
  • Allocate inspections based on risk and schedule.
  • Review/perform critical inspections and verify test evidence.
  • Reject non‑compliant material/work and record required disposition.
  • Analyse repeat defects and coordinate root‑cause action.
  • Review handover dossier completeness and customer snags.
  • Issue daily quality exceptions and DWR.
  • Update DWR daily in the company‑provided software and share with the reporting manager.
Role Boundary

This role remains accountable for the outputs listed above even when work is delegated. During absence or vacancy, the named backup may perform essential transactions within documented authority. Technical approvals, commercial commitments, safety waivers and quality acceptance may be exercised only by a competent and authorized person. Handover must include current trackers, pending actions, access credentials under approved custody, documents and due dates.

Key Result Areas
  • Quality planning and standards
  • Incoming and installation quality
  • Inspection and test control
  • NCR, rework and defect prevention
  • Handover dossier and acceptance
  • Quality improvement and independence
  • Daily Work Report completeness and accuracy
Key Performance Indicators
  • Seven required project inspection stages completed | Target: 100% of all seven required stages | Review: Per stage
  • Punch‑point verification and closure before handover | Target: 100% verified closed by D+15 and before handover | Review: Per project
  • Inspection evidence and report accuracy | Target: 100% required inspection evidence | Review: Monthly
  • NCR and corrective‑action closure | Target: >=95% by agreed deadline; blockers within 48 elapsed hours | Review: Monthly
  • Repeat defects and avoidable rework | Target: First‑pass acceptance >=95%; rework cost <=1% of project cost; repeat defects <=2% | Review: Monthly
  • DWR updation and accuracy | Target: 100% of working days with a complete, accurate DWR | Review: Daily
KPI Measurement Method
  • Signed stage‑inspection records / required stages due x 100.
  • Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
  • Complete and accurate inspection records / records checked x 100.
  • Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
  • First‑pass accepted inspections / inspections x 100; rework cost / project cost x 100; repeat defects / defects x 100.
  • Working days with a complete and accurate DWR / working days due x 100; verify work evidence, progress, blockers and manager review.
KPI Weights
  • Seven required project inspection stages completed: 35%
  • Punch‑point verification and closure before handover: 25%
  • Inspection evidence and report accuracy: 15%
  • NCR and corrective‑action closure: 15%
  • Repeat defects and avoidable rework: 10%
  • DWR updation and accuracy: 0%
Performance Framework

Review performance monthly using the specified KPI periods and evidence. Weights total 100% and express relative importance. Assess each KPI against its stated target and approved weight. Non‑Sales roles have no exceeds‑expectations band. Mandatory requirements remain applicable regardless of weight. Where no activity is due, record not applicable with the reason; do not record zero or invent achievement.

Target Rules

Start = later of customer project approval or receipt of at least 10% of signed order value. Let B = ceiling(project kWp / (150 x approved assigned teams)); teams must be at least one. Generation‑initiation duration D = min(60, 15 x B) calendar days. Punch points raised by Quality or customer: close by start + D + 15 days. DISCOM/CEIG approvals: obtain by start + D + 30 days. Handover occurs on approval receipt with all punch points closed. Customer‑payment delays extend dates only for documented days blocking planned work; count overlapping blocked days once. All project days include weekends and holidays. Example: 900 kWp with three teams gives 30/45/60 days. Staff the approved plan to meet the 60‑day cap. Blockers close within 48 elapsed hours. Required Quality stages: before project start; after safety arrangements; after structure mounting; after AC completion; after DC completion before commissioning; after commissioning; and after punch‑point/snags closure. Complete and evidence all seven stages. Critical safety hazards require immediate stop‑work and verified correction before resumption; other safety issues close within 48 elapsed hours.
DWR is mandatory for every role: update every working day. It is monitored as a separate compliance requirement with no additional weight; existing KPI weights remain unchanged.

Total KPI Weight

100%

Approval Status

Approved targets retained; hierarchy revised

KPI Register — Detailed Records

Seven required project inspection stages completed
Department: Operations
Target: 100% of all seven required stages
Review: Per stage
Measurement method: Signed stage‑inspection records / required stages due x 100.
Weight: 35%
Status: Approved targets retained; hierarchy revised

Punch‑point verification and closure before handover
Department: Operations
Target: 100% verified closed by D+15 and before handover
Review: Per project
Measurement method: Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
Weight: 25%
Status: Approved targets retained; hierarchy revised

Inspection evidence and report accuracy
Department: Operations
Target: 100% required inspection evidence
Review: Monthly
Measurement method: Complete and accurate inspection records / records checked x 100.
Weight: 15%
Status: Approved targets retained; hierarchy revised

NCR and corrective‑action closure
Department: Operations
Target: >=95% by agreed deadline; blockers within 48 elapsed hours
Review: Monthly
Measurement method: Items completed within the specified deadline / items due in the review period x 100; use timestamped records.
Weight: 15%
Status: Approved targets retained; hierarchy revised

Repeat defects and avoidable rework
Department: Operations
Target: First‑pass acceptance >=95%; rework cost <=1% of project cost; repeat defects <=2%
Review: Monthly
Measurement method: First‑pass accepted inspections / inspections x 100; rework cost / project cost x 100; repeat defects / defects x 100.
Weight: 10%
Status: Approved targets retained; hierarchy revised

DWR updation and accuracy
Department: Operations
Target: 100% of working days with a complete, accurate DWR
Review: Daily
Measurement method: Working days with a complete and accurate DWR / working days due x 100; verify work evidence, progress, blockers and manager review.
Weight: 0%
Status: Mandatory requirement; no separate weight

Qualifications
  • Engineering degree/diploma, preferably Electrical/Mechanical.
  • 7+ years in solar/EPC quality assurance and site inspection.
  • Strong knowledge of drawings, materials, installation, testing, ITPs and NCR systems.
  • Internal‑auditor/ISO 9001 exposure preferred.
  • Measurement/test‑instrument, documentation and root‑cause analysis skills.
  • Independent judgment, clear reporting and frequent travel readiness.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Project Manager
Project Manager

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 1,200,000 - 2,400,000
Project Engineer
Project Engineer

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 600,000 - 900,000
Head Projects
Head Projects

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 4,000,000 - 7,000,000
Head Operations
Head Operations

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 2,500,000 - 4,200,000
Site Engineer DC
Site Engineer DC

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 350,000 - 650,000
Sr. Solar + BESS Design Engineer
Sr. Solar + BESS Design Engineer

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 1,800,000 - 3,000,000
Design Engineer
Design Engineer

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 600,000 - 1,000,000
Solar Technician and Installer
Solar Technician and Installer

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 240,000 - 420,000
Regulatory and Liaison Officer
Regulatory and Liaison Officer

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 600,000 - 900,000
Head Asset Management
Head Asset Management

Swid Process Technologies Pvt. Ltd. • Pune

On-site
INR 4,000,000 - 6,000,000