Quality Inspector Manufacturing / Quality Assurance 1 position View role

Morcom Induction Private Limited; Sonipat; On-site; INR 200,000 - 320,000; Full time

Job summary

Morcom Induction Pvt Ltd in Sonipat seeks aQuality Inspector to secure product quality on the shop floor. You will inspect PCB/assembly components, perform functional and hi-pot tests, and certify conformity to drawings and specifications.

The role requires 2–4 years in QC for electronics/home appliances, ITI/ Diploma or B.Sc, and a hands-on approach to measurement tools, documentation, and continuous improvement within a busy production line.

Qualifications

• ITI / Diploma in Mechanical / Electrical / Electronics / Production or B.Sc, 12th with strong QC experience acceptable.
• 2–4 years in quality inspection across IQC, in-process and final checks.
• Experience in electronics/home-appliance/auto-component QC is preferred.

Responsibilities

• Incoming Quality Control (IQC) inspection of components against drawings and specs.
• In-process and final inspection to ensure compliance and correct dispositions.
• Functional, hi-pot, load and earth-continuity tests on finished units.
• Maintain measurement instruments, calibration, and traceability.
• Prepare inspection reports, NCR/MRB records and feedback to suppliers.
• Support RCA, CAPA and 5S improvements with QA team.

Skills

Inspection

Testing

Instruments

Documentation

Quality tools

Communication

Education

ITI/ Diploma / B.Sc

Tools

MS Excel

ERP / Odoo

Job description

# Quality InspectorManufacturing / Quality Assurance · Harsana Kalan, Sonipat, HaryanaApply for this roleYou apply directly to Morcom — no consultant, no fee.## At a glancePosition: Quality Inspector (Shop-Floor QC — Incoming / In-Process / Final)Department: Quality Assurance / Quality ControlReports To: QA / QC Engineer / Quality Manager – MorcomDirect Reports: None (individual contributor; may guide helpers during sampling)Company: Morcom Induction Pvt LtdLocation: 21, 22, Sub Tehsil 50, Nos, 30/20, 1 22/2, Rathdhana Road, Harsana Kalan, Sonipat, Haryana – 131001Map: Open in Google MapsEmployment Type: Full-time, Permanent (on-site)Working Days: Monday to SaturdayWorking Hours: 9:00 AM – 7:00 PMExperience Required: 2–4 years in quality inspection (incoming / in-process / final) in electronics / home-appliance / auto-component manufacturingQualification: ITI / Diploma (Mechanical / Electrical / Electronics / Production) or B.Sc; 12th with strong QC experience acceptableCTC: Competitive — commensurate with experience and last drawn; discussed during the interview process.## ROLE PURPOSEThe Quality Inspector is Morcom's gate against defects — checking incoming components, patrolling the induction-cooktop assembly line, and clearing finished units against test and workmanship standards before they ship. The role protects the customer and the brand by catching problems early: verifying material against drawings and specifications, running functional / high-voltage (hi-pot) / load and earth-continuity tests, recording results honestly, raising rejections and non-conformances, and giving the line and suppliers fast, factual quality feedback. It is a hands-on, shop-floor role where accuracy, discipline and integrity matter more than speed.## KEY RESPONSIBILITIES### 1. Incoming Quality Control (IQC)* Inspect components: Check PCB / PCBA, coils, IGBT / power modules, glass tops, wiring harness, plastics and cartons against drawings, specifications and the approved sample.* Sampling & disposition: Draw samples per the sampling plan (AQL / IS 2500), accept / reject / segregate lots, and tag material clearly (OK / HOLD / REJECT).* Supplier feedback: Record incoming defects and share fast, factual feedback with Purchase / supplier quality.### 2. In-Process / Patrol Inspection* Line checks: Run station-wise and first-piece checks across the line (SMT / soldering, coil, power module, wiring, glass-top assembly) and confirm operators follow the work instructions.* Catch early: Identify defects at source, stop suspect production, and prevent defects from moving down the line.### 3. Final / Outgoing Quality* Functional & safety testing: Perform functional test, high-voltage (hi-pot / dielectric) test, load test and earth-continuity check on finished cooktops per the test plan.* Pre-dispatch: Verify workmanship, labelling, accessories and packing before a unit is cleared for dispatch.### 4. Measurement, Instruments & Calibration* Instruments: Use vernier, micrometer, multimeter, gauges and test jigs correctly; read drawings and specifications.* Calibration: Use only calibrated instruments; flag due / out-of-calibration equipment.### 5. Documentation, Rejection & Non-Conformance* Records: Fill inspection reports, checklists and test records accurately and legibly.* NCR / MRB: Raise non-conformance reports and rejection tags; support the Material Review Board on disposition (use-as-is / rework / reject / return-to-vendor).* Traceability: Maintain lot / batch traceability and clean, audit-ready records.### 6. Continuous Improvement & Coordination* RCA support: Support root-cause analysis (5-Why / fishbone), CAPA and defect-reduction with the QA engineer.* Coordination & 5S: Work with Production, Stores and Purchase on quality issues; maintain 5S and discipline in the inspection area.## REQUIRED SKILLS & COMPETENCIES* Inspection: Incoming, in-process and final inspection on a manufacturing line.* Testing: Functional, hi-pot / dielectric, load and earth-continuity testing of electrical products (trainable on induction specifics).* Instruments: Vernier, micrometer, multimeter, gauges and test jigs; reading drawings and specifications.* Standards & sampling: AQL / sampling plans, ISO 9001 records, IPC-A-610 workmanship awareness (a plus).* Documentation: Inspection reports, NCR / MRB, rejection tags and traceability.* Quality tools: 5-Why, fishbone, Pareto and CAPA basics; 5S.* Communication: Fluent Hindi and working English; honest, factual reporting.## QUALIFICATIONS & EXPERIENCE* ITI / Diploma (Mechanical / Electrical / Electronics / Production) or B.Sc; 12th with strong QC experience acceptable.* 2–4 years in quality inspection (incoming / in-process / final) in a manufacturing plant.* Electronics / home-appliance / SMPS / power-electronics / auto-component quality exposure preferred (transferable inspection experience accepted — the product is trainable).## GOOD TO HAVE* Exposure to hi-pot / functional / load testing of electrical or electronic products.* IPC-A-610 workmanship, ISO 9001 / internal-audit exposure, or a QC / NDT certification.* Familiarity with ERP / Odoo quality entries and MS Excel for inspection MIS.## KEY PERFORMANCE INDICATORS (KPIs)* Quality escapes: Defects / complaints escaping to the next stage or the customer (lower is better).* Inspection discipline: Incoming / in-process / final inspection coverage and on-time clearance.* Accuracy: Correct accept / reject decisions; clean, complete inspection and test records.* Rejection control: Support to PPM / rejection reduction and RCA / CAPA closure.* Integrity: Honest, traceable reporting — no units passed without check.## FIRST 90 DAYS — PERFORMANCE EXPECTATIONS* Day 1 – 30: Learn Morcom's product, the induction line and its stations (PCB / coil / IGBT / wiring / glass-top / test / pack), the drawings, specs, test plan and current defects; shadow inspection at IQC, line and final.* Day 31 – 60: Run incoming and in-process / final inspection under light supervision — sample correctly, test correctly, tag material and raise clean inspection reports and NCRs.* Day 61 – 90: Independently own an inspection stage (IQC or final) with correct dispositions, accurate records and active support to rejection-reduction and RCA / CAPA.## HOW TO APPLYInterested candidates may share their updated CV at [e-mail] with the subject line “Application – Quality Inspector”. Shortlisted candidates will be invited for a Face-to-Face interview at the Morcom factory, Harsana Kalan, Sonipat.