BIW Dimensional Engineer

RGBSI; Mumbai; On-site; INR 1,200,000 - 1,800,000; Full time

Job summary

RGBSI is seeking a BIW Geometry Engineering professional in Mumbai to drive design-to-manufacture alignment for new automotive products. You will define dimensional objectives, develop sheet metal drawings and welded assemblies, and specify BIW measurement points to support vehicle build on wheels.

The role requires hands-on CATIA/NX, GD&T knowledge, and experience with weld shop metrology, CMM, and fixture design.

Qualifications

• Experience in Automobile OEM BIW Geometry Engineering.
• Strong knowledge of GD&T, Datum Definition, Locator strategies.
• Hands-on CATIA/NX; ENOVIA/Teamcenter experience preferred.

Responsibilities

• Clear Design to Manufacturing of new product; ensure robustness.
• Define dimensional objectives based on reference process.
• Develop sheet metal parts drawings and externalized welded assemblies have specs.
• Define BIW measurement points and technical specs.
• Manage BIW build geometry issues with cross-functional teams.
• Ensure quality, cost and timeliness objectives for assemblies.
• Drive conformance to GD&T via fixtures, CMM, metrology.
• Analyze measurement data; CP/CPK reporting.
• Support weld shop metrology planning and facilities.
• Develop PLP and locating strategy for BIW process.
• Create line-side closure strategies and section books.
• Perform 2D/3D stack-up analyses to define tolerances.
• Experience with supplier measurement system audits and feedback.
• Experience with sheet metal gauging and holding fixtures.
• RFQ preparation covering technical aspects.

Skills

CATIA

NX

GD&T

BIW Geometry

CMM/Metrology

Weld Shop Metrology

Fixture Design

2D/3D Stack Ups

Tolerance Validation

DVA Process

Tools

CATIA

NX

ENOVIA

Teamcenter

CMM

Job description

Role & responsibilities

• 1.Clear Design to Manufacturing of new product. Realize product/process robustness / CADPART geo assessment to release.
• 2.Define theDimensional Engineering Build objectives based on the reference process and in accordance with Technical Referential
• 3.Develop Sheet metal partsdimensional specification drawings & externalized welded assembliesdimensional specifications
• 4.DefineBIWmeasurement points in accordance with engineering Build objectives & definedimensions technical specifications of Body in White & Vehicle on wheels
• 5.ManageBIW& vehicle on wheels Build Geometry issues - Makes counterproposals with respective interior & Exteriors, craftsmanship team to minimize impacts, and negotiates in cross functional meetings
• 6.Ensure quality, cost and timeliness objectives: guaranteeing the feasibility of assemblies (geometry, product conformity, process) and the robustness and respect of Technical Referential
• 7.Driving the part conformance to GD&T defined via checking fixtures , CMM, metrology, & Master cube - working along with SQE , Process Engineering & Product Engineering; Offering ways to optimize PLP to GEO Team
• 8.Measuremnt data analysis and reporting statistically. CP-CPK reporting & interpretation of sample data trend
• 9.Weld shop metrology planning, & facilities support
• 10.Develop principal localization points (PLP) & locating strategy document stage wise forBIWprocess- for suppliers & inhouse processes
• 11.Develop closures Hang on line location strategy & section book
• 12.Perform 2D /3D stack up analysis where required to define tolerances, after aligning cross functional team .
• 13.Should have experience of Measurement system audit at supplier end ,and providing feed back for improvement .
• 14.Should have experience of sheet metal part gaging process & holding fixture methods.
• 15.Experience with RFQ Preparation with all Technical Aspect of processes captured.

a) Technical:

• 1.Should Worked in Automobile OEM; inBIWGeometry Engineering
• 2.Sound Knowledge inBIWGD&T/Datum Definition/Locator strategies/Clamping Plan
• 3.Good Knowledge inBIWTolerance Validation/RSS Stack/1D/3D Stack Ups
• 4.Hands on Experience with CATIA/NX & ENOVIA/Teamcenter is Must
• CATIA hands on Experience ; Unigraphics Experience would be added advantage
• 5.Well Experienced with Weld shop Metrology- Checking fixtures CMM m/c
• 6.Knowledgeble in all types of Hemming process and C/Measure.
• 7.Knowledgeable in plastic part tolerancing & Vehicle on wheels.
• 8.should have Knowledgeable in DVA process - input process & output inference
• 9.Knowledgeable with statistical tools & techniques.
• 10.Knowledge on Fixture Design & 2D Detailing

b) Behavioral :

• Good Communication Skills
• Leadership - to Drive CFT
• Must be ok to work overseas plants as required by project.
• Good analysis Skills
• Dynamic & self Starter
• Good Team Player he can work as CFT to solve Quality issue
• Should have Problem Solving Skills