BIW Dimensional Engineer

RGBSI; Kolkata District; On-site; INR 1,200,000 - 2,400,000; Full time

Job summary

RGBSI in Kolkata, India seeks an experienced BIW Geometry Engineer to drive measurement, tolerance validation, and GA verification for BIW assemblies. You will work with cross-functional teams on design-to-manufacture processes, contributing to GD&T standards and fixture design in a fast-paced automotive environment.

The role requires CATIA/NX and ENOVIA/Teamcenter proficiency, hands-on metrology experience, and strong problem-solving and leadership skills for overseas projects if needed.

Qualifications

• Experience in BIW Geometry Engineering in Automobile OEM.
• Strong knowledge of GD&T, Datum Definition, and Locator strategies.
• CATIA/NX and ENOVIA/Teamcenter experience mandatory.
• Weld shop metrology and CMM knowledge.
• Experience with Hemming process and C/Measure.
• Ability to work in cross-functional teams and solve quality issues.

Responsibilities

• Translate design to manufacturing and ensure product/process robustness.
• Define dimensional objectives and reference process.
• Develop sheet metal part drawings and externalized welded assemblies dimensions.
• Define BIW measurement points and vehicle-on-wheels specs.
• Contribute to cross-functional meetings to minimize impacts and negotiate solutions.
• Ensure quality, cost and timeliness objectives for assemblies.
• Perform 2D/3D stack-up analyses to define tolerances.
• Lead measurement system audits at supplier sites and provide feedback for improvements.

Skills

BIW Geometry Eng

GD&T/Datum

Locator strategies

Clamping Plan

Tolerance Validation

RSS Stack

1D/3D Stack Ups

Weld shop metrology

CMM

Fixture Design

2D Detailing

Hemming process

Plastic part tolerancing

Cross-functional work

Problem Solving

Communication Skills

Leadership

Global/Overseas work

Analysis skills

Self-starter

Team player

Tools

CATIA

NX

ENOVIA/Teamcenter

Unigraphics

Job description

Role & responsibilities

• 1.Clear Design to Manufacturing of new product. Realize product/process robustness / CADPART geo assessment to release.
• 2.Define theDimensional Engineering Build objectives based on the reference process and in accordance with Technical Referential
• 3.Develop Sheet metal partsdimensional specification drawings & externalized welded assembliesdimensional specifications
• 4.DefineBIWmeasurement points in accordance with engineering Build objectives & definedimensions technical specifications of Body in White & Vehicle on wheels
• 5.ManageBIW& vehicle on wheels Build Geometry issues - Makes counterproposals with respective interior & Exteriors, craftsmanship team to minimize impacts, and negotiates in cross functional meetings
• 6.Ensure quality, cost and timeliness objectives: guaranteeing the feasibility of assemblies (geometry, product conformity, process) and the robustness and respect of Technical Referential
• 7.Driving the part conformance to GD&T defined via checking fixtures , CMM, metrology, & Master cube - working along with SQE , Process Engineering & Product Engineering; Offering ways to optimize PLP to GEO Team
• 8.Measuremnt data analysis and reporting statistically. CP-CPK reporting & interpretation of sample data trend
• 9.Weld shop metrology planning, & facilities support
• 10.Develop principal localization points (PLP) & locating strategy document stage wise forBIWprocess- for suppliers & inhouse processes
• 11.Develop closures Hang on line location strategy & section book
• 12.Perform 2D /3D stack up analysis where required to define tolerances, after aligning cross functional team .
• 13.Should have experience of Measurement system audit at supplier end ,and providing feed back for improvement .
• 14.Should have experience of sheet metal part gaging process & holding fixture methods.
• 15.Experience with RFQ Preparation with all Technical Aspect of processes captured.

a) Technical:

• 1.Should Worked in Automobile OEM; inBIWGeometry Engineering
• 2.Sound Knowledge inBIWGD&T/Datum Definition/Locator strategies/Clamping Plan
• 3.Good Knowledge inBIWTolerance Validation/RSS Stack/1D/3D Stack Ups
• 4.Hands on Experience with CATIA/NX & ENOVIA/Teamcenter is Must
• CATIA hands on Experience ; Unigraphics Experience would be added advantage
• 5.Well Experienced with Weld shop Metrology- Checking fixtures CMM m/c
• 6.Knowledgeble in all types of Hemming process and C/Measure.
• 7.Knowledgeable in plastic part tolerancing & Vehicle on wheels.
• 8.should have Knowledgeable in DVA process - input process & output inference
• 9.Knowledgeable with statistical tools & techniques.
• 10.Knowledge on Fixture Design & 2D Detailing

b) Behavioral :

• Good Communication Skills
• Leadership - to Drive CFT
• Must be ok to work overseas plants as required by project.
• Good analysis Skills
• Dynamic & self Starter
• Good Team Player he can work as CFT to solve Quality issue
• Should have Problem Solving Skills