Fire Suppression Systems Engineers (Longer Term Contract Work)

Fulcrum Engineering; Farnborough; On-site; GBP 29,000 - 48,000; Full time

Job summary

Fulcrum Engineering & Technical is recruiting Fire Suppression - Sprinkler Install & Service Engineers/Techs for multiple sites around Farnborough, Guildford, Reading, Slough and London area. Duties include installation, service, and commissioning of fire suppression and sprinkler systems.

Roles involve fabricating and fitting pipework, pipe fabrication, fitting, and performing PPM checks on running systems.

Qualifications

• CSCS Card & IPAF 3a, 3b required.
• 5 years skills/experience in pipe fitting or sprinkler installations.
• 2+ years site install experience.

Responsibilities

• Install and service Fire Suppression/Sprinkler Systems and mechanical systems on site.
• Fabricate and fit pipework 6-12 mm with compression fittings; hand bending as required.
• Carry out PPM checks on installed systems and commission new installations.
• Perform QC checks and pipework tests; ensure clean work area and safety compliance.

Skills

Pipe fitting

Fire suppression systems

Mechanical installation

HVAC knowledge

Education

C&G or NVQ Pipe Fitting

Sprinkler Fitting Certification

Tools

Stilsons

Adjustable spanners

Screwdrivers

Measuring tape

Job description

Fire Suppression Systems Engineers (Longer Term Contract Work)

Fulcrum Engineering & Technical are acting as a Employment Business on behalf of our Clients

Covering Farnborough, Guildford, Reading, Slough, London area Sites

We are recruiting personnel at all levels and covering similar roles,

Job Title = Fire Suppression - Sprinkler Install & Service Engineers/Techs

Number Required = 1 - 2 + each

Duties Skilled Engineers & Techs = Working on Installation Work &

Service and Commissioning Work of Fire Suppression & Sprinkler Systems

Then mainly working on installation & fitting of Fire Suppression/Sprinkler Systems

Including fabricating & fitting pipework 6 - 12 mm with compression fittings then fitting of mist heads which will require hand pipe bending as required.

Then other work as requires on Servicing work completing PPM checks on installed running operational systems & Commissioning Systems.

Checking completed work QC Checks & Pipework Tests

Other work such as fabrication & installing new modified pipework to drawings or site run work.

Working on 1/2 - 2 inch screwed & maypress pipework & 2 - 4 inch flanged & welded pipework.

Duties Semi Skilled & Mates = Assisting Skilled Engineers/Fitter with installation of

Fire Suppression/Sprinkler Pipework, brackets from engineering drawings.

Operating Mobile Platforms Scissor Lifts & Cherry Pickers

Assisting with QC Checks & Pipe Tests

Keeping work areas clean & tidy.

Qual Certs & Safety Cards Required ? =

Must have current CSCS Card & IPAF 3a, 3b Card

Skilled = C & G or NVQ Pipe Fitting or Sprinkler Fitting With 5 years skills/experience

Semi Skilled Mates = 2 + Years Site Install Experience

Ideally Pipe Fitting or Plumbing Qual Certs or Part Qual

Safety Wear PPE Required ? =

Clean Work Overall, Steel Safety Boots, Safety Helmet,

High Visibility Vest, Work Gloves

Hand Tools Required ? =

Adjustable Spanners, Open & Ring Spanners 12 – 30 mm, Stilsons, Screw Driver

5M Tape Measure, Small Level, Note Book & Pencil

Hours = 0700 to 1700 45 to 55 + hours Mon to Fri as required

Also might work 0600 or 0700 to 1330 Sat as required

Term = Temp Contract Long Term 13 + to 26 + weeks

Pay Temp Contract Skilled = £26 + per Hr up to 60 Hrs Sat £31 per Hr Sun £35 per Hr CIS Basis

Depending on Skills/Quals Improver or Semi Skilled = £21 + Mates = £18 + Hr CIS Basis

C & G or NVQ Pipe Fitting or Mechanical or HVAC EngineeringSkills/Experience Pipe Fabrication & Fitting work mainly.Work on Fire Suppression & Sprinkler Systems and Mechanical SystemsIdeally fitting HVAC systems,Ideally Manual Handling, Working at Heights Certs,CCNSG or EMSS Safety Passport