CBM Supervisor* M/F

SPIE; France; On-site; EUR 85,000 - 135,000; Full time

Job summary

SPIE is seeking a highly experienced CBM specialist to join our offshore maintenance team. You will perform vibration surveys, oil analysis, IR thermography, and other condition monitoring activities on oil and gas production installations to ensure equipment availability and reliability.

You will follow up corrective actions, prepare reports, and coordinate with RCM and maintenance engineers to plan interventions and optimize CBM programs.

Qualifications

• Bachelor's Degree in Engineering.
• Vibration ISO Cat II Certification, based on ISO 18436-3.
• Ability to use sensors and other monitoring equipment (Infrared thermography / Vibration monitoring / Oil analysis / Ultrasonic analysis / Pressure analysis / Electrical analysis).
• +10 years’ experience minimum in the maintenance field on oil and gas production installations.
• 5 years experience in Condition Based and Predictive Maintenance.
• Experience in maintenance support and especially in field maintenance capacity.
• Good knowledge of CBM tools (OROS, Bentley Nevada, OneProd, Allen Bradley, etc...).
• Good knowledge of planning tools, and of CMIMS tools (preferably SAP based).
• Fluent in English, knowledge of French & Portuguese language recommended.
• Physical ability to work on offshore installations in the climatic conditions of the site.

Responsibilities

• Carries out CBM vibration surveys on site and issues reports accordingly.
• Follows up with site to ensure that all actions arising from the CBM Surveys are promptly closed.
• Carries out Lube Oil sampling as per the planning, performs laboratory analysis of the samples as required and issues reports accordingly.
• Advises site on the outcome of the Lube Oil analysis and the actions required to be carried out to ensure equipment availability.
• Reviews and advises and follows up on the acceptable process for Lube Oil management on site.
• Carries out gas leak investigation/surveys on sites and makes estimates of the leakage rates of valves; develops action plans to close leaks.
• Maintains liaison with RCM Specialist and Maintenance Discipline Methods Engineers to monitor actions from CBM campaigns.
• Follows up corrective actions on analyses and visits site as needed for specialized CBM activities (balancing, alignment, rotor adjustments).
• Issues regular CBM reports to show health status of large machinery and highlight pending problems.
• Takes ownership of CBM tools on sites and base, ensures proper usage and safekeeping.
• Carries out infra-red thermography campaigns on electrical switchboards and reports actions.
• Follows up Condition Based Monitoring of electrical motors and liaises with Contractors for interpretation and solutions.
• Carries out boroscope inspection on turbogenerators when required and issues reports.
• Follow up SAP Work Orders to ensure proper preparation, close out and reporting on all CBM activities on site
• Assists in other ways to support maintenance team objectives for availability and reliability of rotating equipment.

Skills

Vibration analysis

Infrared thermography

Oil analysis

Data collection

CBM tools

Planning tools

CMIMS tools

Education

Bachelor's Degree in Engineering

Vibration ISO Cat II Certification

Tools

CBM tools (OROS)

Bentley Nevada

OneProd

Allen Bradley

CMIMS tools (SAP based)

Job description

• Contributes to the building of Methods and Support activities within the Maintenance entity.
• Carries out CBM vibration surveys on site and issues reports accordingly.
• Follows up with site to ensure that all actions arising from the CBM Surveys are promptly closed
• Carries out Lube Oil sampling as per the planning, performs laboratory analysis of the samples as required and issues reports accordingly.
• Advises site on the outcome of the Lube Oil analysis and the actions required to be carried out to ensure equipment availability.
• Reviews and advises and follows up on the acceptable process for Lube Oil management on site.
• Carries out gas leak investigation/surveys on sites and makes estimates of the leakage rates of valves. Also, develops the action plan to close out the leaks on the concerned valves.
• Assists in vibration analyses and other analyses including all methods related activites as required.
• Maintains close liaison with the RCM Specialist and Maintenance Discipline Methods Engineers to monitor and follow up actions arising from the results of CBM measurement campaigns.
• Follows up with site on all the corrective actions recommended following analyses to ensure that they are properly implemented. Visits site whenever the need arises and physically assists to carry out specialized activities following from CBM results (balancing, alignment, rotor axial position adjustment, proximiter gaps setting, etc.…)
• Issues regular CBM reports as considered necessary to show the health status of big machinery and to highlight pending problems.
• Takes the ownership on all CBM tools on sites and at base, and acts to ensure their proper usage and safekeeping.
• Carries out infra-red thermography campaigns on electrical switchboards and ensures the timely execution and report interpretation. Follows up with site on the corrective actions arising therefrom.
• Follows up the Condition Based Monitoring of electrical motors, collects and reviews data, and liaises with the RCM Specialist and Maintenance Discipline Methods Engineer to engage responsible Contractors for the interpretation of results and recommendation of solutions to equipment issues.
• Carries out borroscope inspection on turbogenerators when required and issues reports.
• Follow up SAP Work Orders to ensure proper preparation, close out and reporting on all CBM related actitives on site
• Assists in any other way considered necessary in his capacity, to support the maintenance team objective to ensure efficient site support and good availability and reliability of rotating equipment.

HSE Commitment:

• Demonstrate personal commitment to the HSSE policy of the Company
• Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

Perfil

The holder of this position must have the following qualifications:

• Bachelor's Degree in Enginering,
• Vibration ISO Cat II Certification, based on the ISO 18436-3
• Ability to use sensors and other monitoring equipment to collect data on the performance of equipment (Infrared thermography / Vibration monitoring / Oil analysis / Ultrasonic analysis / Pressure analysis / Electrical analysis)
• +10 years’ experience minimum in the maintenance field on oil and gas production installations,
• 5 years experience in Condition Based and Predictive Maintenance
• Experience in maintenance support and especially in field maintenance capacity
• Good knowledge or CBM tools (OROS, Bentley Nevada, OneProd, Allen Bradley, etc...)
• Good knowledge of planning tools, and of CMIMS tools (preferably SAP based)
• Fluent in English, knowledge of French & Portuguese language recommended
• Physical ability to work on offshore installations in the climatic conditions of the site,

Basic Salary + other internal benefit.

Local

Offshore

• Bachelor's Degree inEnginering,
• Vibration ISO Cat II Certification, based on the ISO 18436-3
• +10 years’ experience minimum in the maintenance field on oil and gas production installations,
• 5 years experience in Condition Based and Predictive Maintenance
• Experience in maintenance support and especially in field maintenance capacity
• Good knowledge or CBM tools (OROS, Bentley Nevada, OneProd, Allen Bradley, etc...)
• Good knowledge of planning tools, and of CMIMS tools (preferably SAP based)

Idiomas

• Anglais (C-Professional working proficiency)
• Portugais (C-Professional working proficiency)

We align the company’s ambitious vision with the candidate’s goals to create a path of mutual growth, where talent and purpose move forward in the same direction.