Welding Services Inspector

Spectra Tech, Inc.; Oak Ridge (TN); On-site; USD 60,000 - 90,000; Full time

Job summary

Spectra Tech, Inc. seeks a qualified inspector to provide staff augmentation for ORNL Welding Services. The role covers NDE/welding examinations, testing, and inspection of steam valves, pressure vessels, ladders, piping, and structures in shop and field settings.

The candidate will report to FIID Welding Services Program Manager; requires a strong welding background, ASNT/ASME/AWS credentials, and ability to produce isometric sketches. Fall protection training will be provided.

Qualifications

• Minimum high school education with at least five years in welding inspection and NDE of welds.
• Current AWS CWI certificate; ASNT SNT TC 1A Level II PT and VT qualifications.
• ASNT SNT TC 1A Level II MT yoke qualification preferred.
• Working knowledge of ASNT, ASME B31, AWS B2.1, AWS D1.1, D1.2, D1.6, D9.1, and ASME boiler/pressure vessel codes.
• Ability to produce isometric sketches by hand or CAD.
• Fall protection training provided by ORNL.

Responsibilities

• Perform NDE/welding examinations, testing and inspection of valves, pressure vessels, ladders, piping, and structural assemblies.
• Inspect fabrication assemblies for repair work and new construction.
• Work in shop and field environments, solo or in teams.

Skills

NDE welding inspection

Strong welding background

Written and verbal communication

Basic office software (Word, Excel)

Education

High school diploma or equivalent

AWS CWI certificate (current)

ASNT SNT TC 1A Level II PT/VT

ASNT SNT TC 1A Level II MT yoke (preferred)

Tools

CAD (isometric sketches)

Job description

Scope of Work

A qualified inspector that can provide staff augmentation for ORNL Welding Services that is capable to perform the work within the policies and rules of ORNL and the extra requirements stated below. The position will report to the Fabrication Instrumentation & Inspection Division (FIID) Welding Services Program Manager. The Inspector will be required to work with minimal supervision and shall be responsible for: Nondestructive Examination (NDE)/welding examinations, testing and inspection of steam valves, pressure vessels, inspection of fixed ladders, piping components, structural assemblies and other fabrication assemblies as required for repair work and new construction/fabrication. Work will be performed in both a shop and field environments and could be individual or working on a team. This position requires good working knowledge of shop and field fabrication techniques, and a strong welding background is preferred. The Candidate must have good written and verbal communication and the ability to use basic office software (e.g. Word, Excel, time management software, etc.) and be able to make isometric sketches.

Qualifications

A minimum of a high school education, or equivalent, with at least five-years of experience with welding inspection and NDE of welds. The candidate must possess a current and valid American Welding Society certified welding inspector (CWI) certificate, ASNT SNT TC 1A level II liquid penetrant (PT) and visual inspection (VT) qualifications. An ASNT SNT TC 1A Level II magnetic particle (MT) yoke inspection qualification is also preferred. The Candidate shall have a working knowledge of ASNT, ASME B31, AWS B2.1, AWS D1.1, AWS D1.2, AWS D1.6, AWS D9.1, & ASME boiler and pressure vessel codes/specs/standards. Hydrostatic and pneumatic testing experience is preferred. The candidate must be able to produce isometric sketches for documentation purposes by hand or CAD. NOTE: Successful candidate will be required to pass a practical exam conducted by the ORNL NDE Level III program manager. Fall protection training and equipment will be provided by ORNL.

Physical Requirements

The position requires being able to climb and work at elevated heights on ladders, scaffolding, and stairs and may require medical clearance for respirator use. Fixed ladder inspections could occasionally be up to 250' above ground level ascending and descending with advanced fall protection techniques. Work could be performed in confined spaces and with other site hazards that may require additional trainings. The Candidate must be able to pass an annual Jaeger 1 eye exam, with or without correction.

Applicable Standards

Service Contract Act (SCA) wage determinations and compliance requirements.

Deliverables

Candidate shall provide written reports and relevant documentation of all inspections in accordance with ORNL procedures and specifications to the FIID Welding Services Program Manager, or designee.

Location

Work to be performed at designated company facility.

Compliance Requirements

• Adherence to SCA wage determination for Fabrication Technician labor category.
• Completion of required reps and certs per FAR and DOE guidelines.
• Safety training and PPE compliance.