Structures Technician - Fabricator

Bombardier

Windsor Locks (CT)

On-site

USD 60,000 - 92,000

Full time

20 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Bombardier in Windsor Locks seeks a skilled Structures Technician - Fabricator to support fabrication, repair, and modification of aircraft structures. You will inspect assemblies, fabricate metal components, and perform structural repairs on jet aircraft models, while adhering to safety and quality standards.

You will work with a team across maintenance disciplines, interpretation of mechanical drawings, and the use of hand tools, with opportunities to grow skills and contribute to

Qualifications

  • Minimum of 4 years of structural fabrication experience, or substantiated equivalent experience.
  • Typically 8+ years’ experience in structural sheet metal repair/modification or equivalent.
  • Typically 2 years of corporate/commercial jet experience.
  • Typically 1 year of Bombardier aircraft model experience.
  • Completion of Sheet Metal Aircraft Technician School or equivalent training.
  • Ability to interpret and work from mechanical engineering drawings.
  • Effective written and verbal communication skills.
  • Ownership of a basic set of hand tools with inventory control.
  • Must obtain Ground Support Equipment (GSE) qualifications as required.
  • Willingness to work unscheduled overtime, including weekends and holidays.
  • Ability to work outdoors in seasonal conditions.

Responsibilities

  • Adhere to General Work Requirements (Factory, Shop, and/or Hangar positions).
  • Comply with environmental health and safety policies and procedures.
  • Participate in 5-S activities and perform work in a safe and timely manner.
  • Troubleshoot, inspect, repair, and perform maintenance on customer aircraft.
  • Fabricate and modify structural components and modifications on aircraft.
  • Perform structural repairs on composite components (attached or detached).
  • Remove and install aircraft components as required.
  • Inspect confined areas of the airframe.
  • Assist with wing removal and reinstallation as needed.
  • Support maintenance activities at off-site locations, when required.

Skills

Structural fabrication
Engineering drawings
Communication skills
Hand tools usage

Education

Sheet Metal Aircraft Technician School or equivalent

Tools

GSE qualifications
Basic hand tools

Job description

Your next opportunity in aerospace could be just one conversation away.

#Bombardier is hiring skilled talent in aircraft maintenance, structures, quality, and operations.

In-Person Hiring Event

New England Air Museum, Windsor Locks, CT

Tuesday, October 6 | 9:00 a.m. to 2:00 p.m. EST

Virtual Hiring Event

Microsoft Teams Interviews

Thursday, October 8 | 8:00 a.m. to 5:00 p.m. EST

Meet our team, explore exciting career opportunities, and discover what it's like to build the future of aviation with Bombardier.

At Bombardier, we design, build and maintain the world’s peak-performing aircraft for the world’s most discerning people and businesses, governments and militaries. We have been successful in setting the highest standards by putting our people at the heart of it all, and defining excellence, together.
Working at Bombardier means operating at the highest level. Every day, you are part of a team that delivers superior experiences and products, pushing the boundaries of what's possible in our industry and beyond. By prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms, because the best work happens when you are free to be yourself and share your unique expertise.

With our employees’ well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following:

  • Insurance plans (Dental, medical, life insurance, disability, and more)
  • Retirement savings plan
  • Employee Assistance Program
What are your contributions to the team?
  • Adhere to Bombardier General Work Requirements (Factory, Shop, and/or Hangar positions)
  • Comply with environmental health and safety policies and procedures
  • Participate in 5-S activities and perform work in a safe and timely manner
  • Troubleshoot, inspect, repair, and perform maintenance on customer aircraft
  • Fabricate and modify structural components and modifications on aircraft
  • Perform structural repairs on composite components (attached or detached)
  • Remove and install aircraft components as required
  • Conduct or assist with inspections for hidden damage on aircraft structures
  • Support and/or perform complex structural repairs on or off the aircraft
  • Perform and document work in compliance with manuals and regulatory requirements
  • Operate ground support equipment as required
  • Repair or assist in the repair of aircraft components
  • Perform mechanical and electrical component removals and installations
  • Inspect confined areas of the airframe
  • Assist with wing removal and reinstallation as needed
  • Support maintenance activities at off-site locations, when required
  • Design, modify, and weld metal fixtures, as needed
  • Fabricate parts for ground support equipment
  • Assist with aircraft towing
  • Collaborate with other maintenance disciplines
  • Perform other duties as assigned
How to thrive in this role?
  • Minimum of 4 years of structural fabrication experience, or substantiated equivalent experience
  • Typically a minimum of 8+ years’ experience of structural sheet metal & repair / modification or substantiated similar experience
    • Typically a minimum of 2 years of corporate / commercial jet experience
    • Typically a minimum of 1 year of Bombardier aircraft model experience
  • Completion of Sheet Metal Aircraft Technician School or equivalent training
  • Ability to interpret and work from mechanical engineering drawings
  • Effective written and verbal communication skills regarding individual and aircraft status
  • Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory and control
  • Must obtain Ground Support Equipment (GSE) qualifications as required
  • Willingness and availability to work unscheduled overtime, including weekends and holidays
  • Ability to work outdoors in seasonal and inclement weather conditions
  • Ability to obtain a SIDA (Security Identification Display Area) badge, if applicable
  • Basic proficiency in PC and computer skills

Now that you can see yourself in this role, apply and join the Bombardier Team!

Bombardier is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by Federal, National, or Local Laws.


Job Structures Technician - Fabricator

Primary Location Hartford Service Center

Shift Day job

Employee Status Regular

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Weekend Aircraft Structures Technician - Sheet Metal
Weekend Aircraft Structures Technician - Sheet Metal

Bombardier • Windsor Locks (CT)

On-site
USD 52,000 - 76,000
Lead Structures Technician
Lead Structures Technician

Bombardier • Windsor Locks (CT)

On-site
USD 90,000 - 120,000
Insurance plans
Retirement plan
Employee assistance
Structures Technician - Evening Shift
Structures Technician - Evening Shift

Bombardier • Windsor Locks (CT)

On-site
USD 55,000 - 75,000
Insurance plans (Dental, medical, life
Retirement savings plan
Employee Assistance Program
Evening Aircraft Structures Technician — Repairs & Modifications
Evening Aircraft Structures Technician — Repairs & Modifications

Bombardier • Windsor Locks (CT)

On-site
USD 55,000 - 75,000
Insurance plans (Dental, medical, life
Retirement savings plan
Employee Assistance Program
Structures Technician - Evening Shift
Structures Technician - Evening Shift

Bombardier Inc. • Windsor (CT)

On-site
USD 80,000 - 110,000
Insurance plans (Dental, medical, life
Retirement savings plan
Employee Assistance Program
Structures Technician - Weekend Shift
Structures Technician - Weekend Shift

Bombardier • Windsor Locks (CT)

On-site
USD 52,000 - 76,000
Structures Technician - Day Shift
Structures Technician - Day Shift

Bombardier • Windsor Locks (CT)

On-site
USD 60,000 - 80,000
Insurance plans
Retirement savings plan
Employee Assistance Program
Technician, Structures
Technician, Structures

Bombardier, Inc • Dallas (TX)

On-site
USD 30,000 - 47,000
Health insurance
Retirement plan
Employee assistance
Operations Supervisor, Airframe & Powerplant (A&P), Global
Operations Supervisor, Airframe & Powerplant (A&P), Global

Bombardier • Windsor Locks (CT)

On-site
USD 90,000 - 120,000
Insurance plans
Retirement savings plan
Employee Assistance Program
+1
Aircraft Wood Finisher & Interior Craftsperson - Day Shift
Aircraft Wood Finisher & Interior Craftsperson - Day Shift

Bombardier • Windsor Locks (CT)

On-site
USD 42,000 - 62,000
Insurance plans
Competitive salary
Retirement plan
+2