Project Field Engineer/Technician C

Vertiv Group

Abilene (TX)

On-site

USD 70,000 - 90,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Vertiv Group is seeking a Team Member to troubleshoot, test, and inspect electrical apparatus while supporting project work across North America. The role requires technical supervision and travel >90% to various project sites.

Candidates should be capable of complex testing and reporting, with a strong grounding in electrical power systems. Ideal applicants have formal engineering or technical schooling, NEC/OSHA knowledge, and proven communication and problem-solving skills.

Qualifications

  • Formal engineering degree or technical schooling with related hands-on electrical testing experience.
  • Knowledge of the National Electrical Code (NEC) and industry standards (OSHA, NFPA).
  • Strong written/verbal communication and basic computer skills.

Responsibilities

  • Perform testing and maintenance of electrical power distribution systems.
  • Troubleshoot relay systems, calibrate relays, and use load recording instrumentation and switchgear testing up to 35 kV.
  • Document results with detailed reports and support project labeling tasks.

Skills

Customer Focus
Decision Quality
Integrity and Trust
Listening
Problem Solving
Standing Alone

Education

BSEE or BSME
Electrical Technical School or Military equivalent
High school diploma with related experience

Job description

Summary

Troubleshoot, test, and inspect electrical apparatus. Perform as "Team Member" person on projects. Perform other assignments as required. Position requires technical supervision.

Essential Duties and Responsibilities

Other duties may be assigned.

  • Perform all aspects of testing and maintenance of electrical power distribution systems.
  • Troubleshooting capabilities, simple relay calibration, use of load recording instrumentation, low and medium voltage switchgear testing through 35 kV class.
  • Test and troubleshoot moderately complex electrical systems, simple relay systems and power metering.
  • May perform simple power system studies including short circuit and protective device coordination.
  • Write complete, detailed reports promptly at end of day/project using a computer.
  • May perform complex analysis and evaluative tasks necessary to complete equipment- labeling projects consistent with recognized industry and international standards, local jurisdiction requirements and Company procedures.
TRAVEL REQUIREMENTS

Willing to travel anywhere in North America >90% of the time. Schedule is dependent upon project work and is flexible to the degree it can be. This is worked out on a case by case basis with your assigned project manager. PTO scheduled in advance can and will be accommodated.

Does NOT require relocation to a Vertiv headquarter or regional office at this time.

This is "project work" which typical projects last anywhere from 1-12 months on average. It can vary based on schedule, progress, and needs of the Company.

Options for downtime (i.e. in between projects), employee can take PTO, training, regional work, and "home office" work.

Typical schedule is to work 8-12 weeks and then 1 week back at "home base" depending on project schedule. This varies based on the phase of the project.

Expect to receive accelerated on-job-training (OJT) and experience due to the nature of this work. Excellent career jump start and then settle down in a region (if and when you choose to do so).

Supervisory Responsibilities

None

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

  • Customer Focus - Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first‑hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect.
  • Decision Quality - Makes good decisions based upon a mixture of analysis, wisdom, experience, and judgment; most of his/her solutions and suggestions turn out to be correct and accurate when judged over time; sought out by others for advice and solutions.
  • Integrity and Trust - Is widely trusted; is seen as a direct, truthful individual, can present the unvarnished truth in an appropriate and helpful manner; keeps confidences; doesn't blame others for his/her own mistakes or misrepresent him/herself for personal gain.
  • Listening - Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees.
  • Problem Solving - Uses rigorous logic and methods to solve difficult problems with effective solutions; probes all fruitful sources for answers; can see hidden problems; is excellent at honest analysis; looks beyond the obvious and doesn't stop at first answers.
  • Standing Alone - Will stand up and be counted; doesn't shirk from personal responsibility; can be counted on when times are tough.
Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience
  • Graduate Engineer BSEE or BSME and no experience.
  • Graduate of applicable Electrical Technical School or Military equivalent and three years minimum same or similar work experience.
  • High school education or equivalent and four years minimum same or similar work experience.
  • Knowledge of the National Electrical Code and various industry standards, such as OSHA and NFPA.
  • Passed NETA II (International Electrical Testing Association) exam or NICET equivalent preferred.
  • Strong background and experience in all types of switchgear testing through 35 kV class.
  • Good theoretical understanding of electrical power systems.
  • Communicate effectively, in writing and verbally, with clients and peers.
  • Good judgment, dependable, good business management skills.
  • Strong computer skills including editing, formatting and using templates in Microsoft Word, use of Internet for standards/products/manufacturer research, and operation of computer controlled test equipment.

Willing to work flexible hours, weekends,

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

ERS-Project Field Engineer/Technician C
ERS-Project Field Engineer/Technician C

Vertiv Group • Abilene (TX)

On-site
USD 70,000 - 90,000
Field Supervisor (Switchgear)
Field Supervisor (Switchgear)

Vertiv Group • United States

On-site
USD 80,000 - 110,000
Field Engineer - Salt Lake City, UT
Field Engineer - Salt Lake City, UT

Vertiv Group • Salt Lake City (UT)

On-site
USD 90,000 - 120,000
Field Electrical Test Technician – MV/LV Power Systems
Field Electrical Test Technician – MV/LV Power Systems

M.C. Dean, Inc. • Atlanta (GA)

On-site
USD 65,000 - 90,000
Field Service Technician (NETA II, III, or IV Certified)
Field Service Technician (NETA II, III, or IV Certified)

Compass Resourcing Group, LLC • Sumner (WA)

On-site
USD 70,000 - 95,000
Field Service Technician (NETA II, III, or IV Certified)
Field Service Technician (NETA II, III, or IV Certified)

Compass Resourcing Group, LLC • Vancouver (WA)

On-site
USD 60,000 - 85,000
Electrical Testing Field Engineer 1- Atlanta, GA
Electrical Testing Field Engineer 1- Atlanta, GA

U.S. Electrical Testing • Atlanta (GA)

On-site
USD 60,000 - 100,000
Medical, dental, vision insurance
401k Retirement Plan
Tuition reimbursement
+3
Electrical Testing Field Engineer 1- Hamlet, NC
Electrical Testing Field Engineer 1- Hamlet, NC

U.S. Electrical Testing • Charlotte (NC)

On-site
USD 60,000 - 90,000
Competitive salary
Medical, dental, vision, life, and_dis
Paid time off
+4
Electrical Test Technician 1 - Hamlet, NC
Electrical Test Technician 1 - Hamlet, NC

U.S. Electrical Testing • Charlotte (NC)

On-site
USD 55,000 - 75,000
Electrical Test Technician II – Field & Shop Expert
Electrical Test Technician II – Field & Shop Expert

M.C. Dean, Inc. • Atlanta (GA)

On-site
USD 85,000 - 115,000
Competitive salary
Medical, dental, vision
Paid time off
+4