Product Painter

Electrofilm Manufacturing Company LLC; California; On-site; USD 45,000 - 75,000; Full time

Job summary

Electrofilm Manufacturing Company LLC in Valencia, CA is seeking a Product Painter. The role involves preparing surfaces, masking, and painting parts to completion in an aerospace/auto/manufacturing context.

Responsibilities include masking, mixing paints, operating spray equipment, curing Paints in ovens, and performing touch ups. Candidates should have 4+ years of experience, read English specifications, and hold a high school diploma with respirator clearance.

Qualifications

• 4+ years of recent experience in paint preparation and painting in aerospace, automotive, or manufacturing.
• Ability to read English specs, instructions, safety rules and manuals.
• High school diploma or equivalent; respirator fit tested and cleared.

Responsibilities

• Apply masking tape to protect areas not to be coated.
• Mix paints and catalysts; operate spray equipment and adjust spray width/pressure.
• Clean spraying equipment with solvent and maintain a safe work environment.
• Operate oven to cure and perform paint touch up.
• Clean grease and dirt; prepare surfaces for coating.
• Fill, grind and repair surfaces with power/hand tools.
• Prime or paint surfaces after repairs when needed.
• Visually inspect surface for required finish quality.
• Perform other duties as assigned.

Skills

Paint prep/painting

Masking & surface prep

Safety concepts

English reading skills

Attention to detail

Education

High school diploma or GED

Tools

Spray painting equipment

Job description

Product Painter

US-CA-Valencia

Job ID: 2026-18480

# of Openings: 1

Category: Operations

US-CA-Valencia -1166

Overview

The Product Painter performs preparation work prior to painting, such as repairing surface defects sanding and cleaning. Then The Equipment Operator paints parts to completion.

Responsibilities

• Applies masking tape or other material over parts and areas that are not to be coated.
• Mix paints and catalyst prior to applying, pouring coating liquid into pressure pot and connects gun to air hose.
• Regulates the width and pressure of spray according to knowledge of painting technique and compliance spraying the work surface to apply prime or finish coat.
• Cleans spraying equipment with solvent using proper personal protection and maintains a clean and safe work environment.
• Required to operate oven to cure and dry, as well as perform paint touch up.
• Cleans grease and dirt from product using various products depending on the situation.
• Fills, grinds, and sans repaired surfaces, using power tools and hand tools.
• Fills depressions with body filler and may file dings to remove burrs and rough spots to attain smooth surface.
• May prime or paint surfaces after performing body repair.
• Visually examines and feels surface of work piece to achieve required results.
• Performs other work as assigned.

Qualifications

• 4 or more years of recent experience in a paint preparation, painting, sanding and scuffing in the aerospace, automotive field, or manufacturing.
• Knowledge of commonly used safety concepts, practices, and procedures within field
• Ability to read English such as specifications and instructions - such as safety rules, operating and maintenance instructions, and procedure manuals.
• Good Attention to details
• High school diploma, GED or equivalent
• Must be able to read, write and understand English and follow verbal and written instructions accurately.
• Medically cleared to wear a respirator.
• Must be fit tested for a respirator.

PI287993460