Product Painter

Electrofilm Manufacturing Company LLC; Santa Clarita (CA); On-site; USD 30,000 - 47,000; Full time

Job summary

Electrofilm Manufacturing Company LLC in Valencia, CA is seeking a Product Painter to perform surface prep and painting to completion. The role requires applying mask, mixing paints, and operating spray equipment to deliver prime and finish coats, followed by curing in an oven and touch-ups.

You will inspect surfaces, prepare defects, and ensure safe, clean work practices. A high school diploma or equivalent and ability to read English are required; 4+ years in aerospace/automotive manufacturing

Qualifications

• 4+ years of paint prep, painting, sanding and scuffing in aerospace, automotive, or manufacturing
• Ability to read English and follow safety rules, specs and maintenance instructions
• Must be able to read, write and understand English; medically cleared to wear a respirator

Responsibilities

• Mask areas not to be coated with masking tape or protective materials
• Mix paints and catalysts; prepare spray equipment and connect gun to air
• Regulate spray width and pressure for prime or finish coat
• Clean spraying equipment with solvent and maintain a safe, clean work area
• Operate oven to cure/dry and perform paint touch-ups
• Clean grease and dirt; prepare surfaces by filling, grinding, and smoothing defects
• Prime or paint surfaces after body repair as needed
• Visually inspect surface to ensure required results

Skills

Attention to detail

Reading English instructions

Teamwork

Safety awareness

Education

High school diploma or equivalent

Job description

Product Painter

US-CA-Valencia

Job ID: 2026-18480

# of Openings: 1

Category: Operations

US-CA-Valencia -1166

Overview

The Product Painter performs preparation work prior to painting, such as repairing surface defects sanding and cleaning. Then The Equipment Operator paints parts to completion.

Responsibilities

• Applies masking tape or other material over parts and areas that are not to be coated.
• Mix paints and catalyst prior to applying, pouring coating liquid into pressure pot and connects gun to air hose.
• Regulates the width and pressure of spray according to knowledge of painting technique and compliance spraying the work surface to apply prime or finish coat.
• Cleans spraying equipment with solvent using proper personal protection and maintains a clean and safe work environment.
• Required to operate oven to cure and dry, as well as perform paint touch up.
• Cleans grease and dirt from product using various products depending on the situation.
• Fills, grinds, and sans repaired surfaces, using power tools and hand tools.
• Fills depressions with body filler and may file dings to remove burrs and rough spots to attain smooth surface.
• May prime or paint surfaces after performing body repair.
• Visually examines and feels surface of work piece to achieve required results.
• Performs other work as assigned.

Qualifications

• 4 or more years of recent experience in a paint preparation, painting, sanding and scuffing in the aerospace, automotive field, or manufacturing.
• Knowledge of commonly used safety concepts, practices, and procedures within field
• Ability to read English such as specifications and instructions - such as safety rules, operating and maintenance instructions, and procedure manuals.
• Good Attention to details
• High school diploma, GED or equivalent
• Must be able to read, write and understand English and follow verbal and written instructions accurately.
• Medically cleared to wear a respirator.
• Must be fit tested for a respirator.

Equal employment opportunity, including veterans and individuals with disabilities.

PI287993475