Plumber

Aerotek; Oxford (MS); On-site; USD 25,000 - 59,000; Full time

Benefits offered by this job

Weekly pay

Medical, dental & vision

401(k) Retirement Plan

Life Insurance

Employee discounts

Job summary

Aerotek is seeking a Journeyman Plumber for Oxford, MS to perform journey-level plumbing work across a large university campus, including hydronic heating and utility distribution systems. This contract-to-hire role requires installation, maintenance, and repair of plumbing and related systems in academic and research facilities.

You will work with trades and facility staff, ensuring compliance with codes, safety standards, and project timelines while supporting critical campus operations and

Qualifications

• Minimum of 4 years of plumbing experience or completion of a recognized plumbing apprenticeship program.
• Proven experience installing and repairing plumbing systems, including water, sewer, steam, and gas systems.
• Ability to install, connect, and test a wide range of plumbing fixtures and gas-fired equipment.
• Strong skills in pipe installation, pipe fitting, and pipe repair across various materials such as PVC and other piping systems.
• Ability to read, interpret, and work from blueprints, sketches, trade practice specifications, and applicable plumbing codes.
• Proficiency with hand tools and mechanical tools commonly used in plumbing and construction.
• Experience with installation, preventive maintenance, troubleshooting, and repair of site-wide plumbing, hydronic heating, and utility distribution systems.
• Capability to diagnose and repair domestic water supply, drainage, venting, and sewage systems, including water heaters, flushometers, backflow preventers, and fire hydrants.

Responsibilities

• Install, connect, and test plumbing fixtures across campus facilities.
• Diagnose and repair major plumbing breakdowns and maintain hydronic systems.
• Read blueprints and plan pipe routes according to codes.
• Service and maintain water treatment and RO systems for research labs.
• Respond to emergencies and clear blockages using specialized tools.
• Collaborate with other trades to minimize disruption to activities.

Skills

Plumbing experience

Blueprint reading

Gas piping

Hydronic systems

Troubleshooting

Safety compliance

Team collaboration

Education

Plumbing apprenticeship program

Tools

Backhoes

Trenchers

Sewer cleaning equipment

Diagnostic drain cameras

Job description

Journeyman Plumber

Job Description

This role performs journey-level plumbing work to install, maintain, and repair plumbing, hydronic heating, and utility distribution systems across a large university campus. You will ensure that academic buildings, high-density housing, athletic facilities, and specialized research laboratories operate safely, efficiently, and in full compliance with codes and safety standards.

Responsibilities

• Install, connect, and test plumbing fixtures including urinals, water closets, wash basins, sinks, drinking fountains, compressed air fixtures, and gas-fired equipment such as heat furnaces, boilers, and processing tanks.
• Monitor and troubleshoot major plumbing breakdowns by diagnosing issues and performing repairs or replacements on clogged main sewer lines, main gas line failures, steam equipment and devices, and fire sprinkler systems.
• Determine routing of pipe and location of plumbing fixtures, accessories, and equipment such as inlets, vent pipes, valves, meters, gauges, hangers, brackets, and water, sewer, gas, and air connections by following trade practice specifications, blueprints, sketches, and applicable codes.
• Mark lines and points on walls, floors, ceilings, and open areas or set stakes to locate pipe routes, inlets, outlets, connections, fixtures, and equipment; prepare working sketches as needed to support installations and modifications.
• Check, service, clean, and connect oxygen, nitrous oxide, and suction regulators in applicable facilities, ensuring safe and reliable operation.
• Operate and maintain equipment such as backhoes, trenchers, and sewer cleaning equipment to support installation, excavation, and system maintenance activities.
• Diagnose, troubleshoot, and repair domestic water supply, drainage, venting, and sewage systems, including the repair or replacement of water heaters, commercial flushometers, backflow preventers, and campus fire hydrants.
• Maintain specialized campus systems such as medium and low-pressure steam distribution lines, condensate traps, and hydronic heating and chilled water systems to support building comfort and reliability.
• Service water treatment systems critical to research laboratories, including reverse osmosis (RO) systems, water softeners, and distillers, ensuring consistent water quality for specialized applications.
• Respond to emergencies and clear complex blockages in sanitary, storm, and grease drain lines using high-velocity water jetters, commercial augers, and diagnostic drain cameras.
• Install plumbing lines, gas piping, and laboratory-specific fixtures such as emergency eyewash stations, autoclaves, and chemical waste drains to support facility upgrades and laboratory remodels.
• Ensure all work complies with state and local plumbing codes, OSHA regulations, and institutional safety guidelines, including adherence to lockout/tagout protocols and other safety procedures.
• Perform preventive maintenance on plumbing, hydronic heating, and utility distribution systems to reduce downtime and extend equipment life.
• Collaborate with other trades and facility staff to plan, schedule, and coordinate work, minimizing disruption to academic and research activities.
• Perform related or similar duties as required or assigned to support the overall operation and maintenance of campus facilities.

Essential Skills

• Minimum of 4 years of plumbing experience or completion of a recognized plumbing apprenticeship program.
• Proven experience installing and repairing plumbing systems, including water, sewer, steam, and gas systems.
• Ability to install, connect, and test a wide range of plumbing fixtures and gas-fired equipment.
• Strong skills in pipe installation, pipe fitting, and pipe repair across various materials such as PVC and other piping systems.
• Ability to read, interpret, and work from blueprints, sketches, trade practice specifications, and applicable plumbing codes.
• Proficiency with hand tools and mechanical tools commonly used in plumbing and construction.
• Experience with installation, preventive maintenance, troubleshooting, and repair of site-wide plumbing, hydronic heating, and utility distribution systems.
• Capability to diagnose and repair domestic water supply, drainage, venting, and sewage systems, including water heaters, flushometers, backflow preventers, and fire hydrants.
• Experience working with steam distribution lines, condensate traps, and hydronic heating and chilled water systems.
• Ability to service water treatment systems such as reverse osmosis units, water softeners, and distillers.
• Skill in clearing complex blockages using high-velocity water jetters, commercial augers, and diagnostic drain cameras.
• Knowledge of and adherence to state and local plumbing codes, OSHA standards, and institutional safety guidelines, including lockout/tagout procedures.
• Physical ability to lift, carry, push, and pull equipment or piping weighing up to 75 pounds.
• Comfort working in confined spaces, utility tunnels, and steam manholes, and performing tasks that require crawling or kneeling for extended periods.
• Willingness and ability to work around hazardous elements and extreme temperatures while using appropriate Personal Protective Equipment (PPE).

Additional Skills & Qualifications

• Experience working in a institutional, or multi-building environment with diverse facility types.
• Background in construction-related plumbing, including renovation, retrofits, and new installations.
• Familiarity with compressed air fixtures and medical gas-related components such as oxygen, nitrous oxide, and suction regulators.
• Experience operating and maintaining heavy and specialized equipment such as backhoes, trenchers, and sewer cleaning equipment.
• Strong mechanical aptitude and problem-solving skills for complex systems and infrastructure.
• Ability to prepare basic working sketches and layout markings to support planning and coordination of plumbing installations.
• Effective communication skills to coordinate with maintenance staff, contractors, and building occupants.
• Commitment to safe work practices and continuous improvement in system reliability and performance.

Work Environment

The work involves frequent lifting, carrying, pushing, and pulling of equipment and piping up to 75 pounds, as well as extended periods of standing, crawling, or kneeling. You will use a wide range of tools and equipment, including hand tools, mechanical tools, backhoes, trenchers, sewer cleaning equipment, high-velocity water jetters, commercial augers, and diagnostic drain cameras, within an environment that emphasizes safety, code compliance, and reliable facility operations.

Job Type & Location

This is a Contract to Hire position based out of Oxford, MS.

Pay and Benefits

The pay range for this position is $18.00 - $43.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your jobclassification and length of employment. Benefits are subject to change and may besubject to specific elections, plan, or program terms. If eligible, the benefitsavailable for this temporary role may include the following:

Medical, dental & visionCritical Illness, Accident, and Hospital401(k) Retirement Plan Pre-tax and Roth post-tax contributions availableLife Insurance (Voluntary Life & AD&D for the employee and dependents)Short and long-term disabilityHealth Spending Account (HSA)Transportation benefitsEmployee Assistance ProgramTime Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Oxford, MS.

Application Deadline

This position is anticipated to close on Oct 31, 2026.

Workplace Type

This is a fully onsite position in Oxford,MS.

About Aerotek

Aerotek Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.