Coating Inspector

DVJ Consulting Engineers; Los Angeles (CA); On-site; USD 70,000 - 100,000; Full time

Job summary

DVJ Consulting Engineers seeks a coating inspector to oversee coating applications on waterworks, bridges, and flood control projects. You will inspect surface prep, film thickness, and adhesion, prepare reports, and enforce contract requirements on contractor work.

Candidates should have SSPC/NACE Level 2 or 3 certs and knowledge of Cal/OSHA safety rules, with the ability to interpret plans and resolve issues on site.

Qualifications

• Familiar with ANSI, NACE, SSPC, NSF, ASTM standards.
• Knowledge of surface prep, film thickness, adhesion tests.
• Cal/OSHA Construction Safety Orders and confined spaces knowledge.
• SSPC/NACE Level 2 or 3 certs; Level 2 under Level 3 supervision.
• Ability to interpret plans, specs and contract docs.
• Ability to identify problems and propose solutions.
• Experience inspecting coating on penstocks, valves and bridges.
• Cathodic protection knowledge.

Responsibilities

• Under oversight of construction leaders, perform coating inspections on projects.
• Prepare inspection reports.
• Inspect coating works including surface preparation, thickness, and adhesion tests; enforce contract compliance.
• Respond to complaints and inquiries from stakeholders and other Department staff.
• Establish and maintain effective working relationships with Department staff.

Skills

Interpret plans and contract documents

Coating inspection experience

Problem solving and proposing fixes

Education

NACE Level 2 or 3 certification

Cal/OSHA construction safety orders knowledge

Job description

Roles and Responsibilities

• a) Under the oversight and direction of Department Section Head, Construction Inspectors, Resident Engineers, Area Supervisors or Consultant Construction Managers on projects requiring a coating inspector.
• b) Preparation of inspection reports.
• c) Perform inspections of coating works and the related practices such as but not limited to surface preparation, film thickness, protection of surfaces, application of fillers, adhesion testing, spark testing, instrument verification, etc.; perform oversight and enforcement of compliance with the contract documents for the coating of various Department waterworks, bridge, and flood control projects/facilities being constructed/restored by contractors under contract with the Department.
• d) Respond to complaints and inquiries from the public, elected officials, other agencies, Project Management Division III staff and other affected Department Divisions.
• e) Establish and maintain effective working relationships with Department staff.

Desired Qualifications

• a) Familiarity with, and a working knowledge of related standards from the American National Standard Institute (ANSI), NACE International (NACE), Society for Protective Coatings (SSPC), NSF International (NSF), American Society for Testing and Materials (ASTM), etc.
• b) Familiarity with but not limited to standard test practices for coating work surface preparation techniques, coating inspection instrumentation, measurements of film thickness, protection of surfaces, use and application of fillers, adhesion testing, spark testing, etc.
• c) Working knowledge of the Cal/OSHA Construction Safety Orders and applicable confined space regulations.
• d) Applicable SSPC & NACE Level 2 or 3 certifications with a minimum of 10 years experience. NACE Level 2 must be under the supervision of a NACE Level 3 supervisor who will review and sign off on reports.
• e) Ability to interpret plans, specifications, special provisions and other contract documents.
• f) Ability to independently identify potential problems and propose solutions.
• g) Previous experience on inspection of coating work related but not limited to penstocks, valves, storage tanks, waterlines and bridges.
• h) Knowledge of cathodic protection systems.