CNC Milling Operator III

Lourdes Design and Manufacturing

Hauppauge (NY)

On-site

USD 75,000 - 110,000

Full time

6 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health insurance
Dental insurance
Vision insurance

Job summary

Lourdes Design and Manufacturing is seeking a seasoned CNC Milling Operator III to program, set up, prove out, and operate complex 3-, 4-, and 5-axis milling centers in a high-precision environment.

You will develop tooling and fixtures, optimize machining methods, lead first article inspections and NPIs, release first pieces within approved authority, and mentor other operators while upholding GD&T and quality standards.

Qualifications

  • Five or more years of advanced CNC milling programming, setup, and operating experience.
  • Experience with close-tolerance, multi-axis milling (3–5 axis).
  • Deep knowledge of G-code, tooling, parameters, fixtures and workholding.
  • Ability to modify programs using CAM software such as Mastercam or Edgecam.
  • Ability to interpret drawings, GD&T, specifications and first article requirements.
  • Ability to troubleshoot complex machining problems and train others.

Responsibilities

  • Program, set up, prove out, and operate complex CNC milling centers (3–5 axis).
  • Develop tooling, fixtures, and workholding solutions.
  • Lead machining prove-outs and support first articles and NPIs.
  • Release first pieces within approved authority and escalate issues.
  • Mentor and train operators on setups, inspection, programming, and safe machining practices.

Skills

Advanced CNC programming
Setup & operation
G-code knowledge
Troubleshooting
Leadership/mentoring
Communication
Reading GD&T drawings
Process optimization
Ability to interpret engineering specs
Lean manufacturing awareness

Education

High school diploma or equivalent
Technical/trade CNC education preferred

Tools

Mastercam
Edgecam

Job description

PURPOSE:The CNC Milling Operator III is an advanced machinist responsible for programming, setting up, proving out, and operating, and inspecting complex CNC milling processes. The role develops tooling and workholding solutions, optimizes machining methods, supports first articles and new-product introduction, resolves difficult process problems, and mentors other operators The position must qualify and remain authorized as a Certified Operator Inspector to release first pieces within its approved scope of authority. Continued designation as a Level III Operator requires maintaining this qualification and authorization.100% Employer to employees only paid benefits: We cover 100% to the employee for their health, dental, and vision insurance premiums.\"Candidates located within a reasonable commuting distance of our office are preferred.\"PRIMARY RESPONSIBILITIES/AUTHORITY:Advanced Machining: Program, set up, prove out, and operate complex CNC machining centers, including three-, four-, and five-axis equipment when assigned. Operate more than one machine when cycle and process conditions permit and support priority recovery work.Programming: Optimize CNC programs using G-code, offset, feed, and speed adjustments within established authority and document changes as required; maintain required revision and approval controls.Process Planning: Develop the machining sequence, cutting strategy, tooling, workholding, inspection approach, and setup documentation for new or difficult work.Fixtures and Tooling: Design, develop, and prove advanced fixtures, soft jaws, and tooling solutions in collaboration with Engineering and Quality.Inspection, First Article and NPI: Lead machining prove-outs and support first article inspections, engineering changes, prototypes, and production-readiness reviews. Perform advanced first-piece and in-process inspections, evaluate and respond to process trends, and maintain qualification and authorization as a Certified Operator Inspector. Release first pieces within the approved scope of authority and escalate nonconformances, customer-required inspections, and out-of-scope conditions to Quality for independent review and disposition.Technical Problem Solving: Resolve complex dimensional, finish, tool-life, cycle-time, machine, and process-stability problems using structured analysis.Process Improvement: Evaluate cutting tools and machining methods and implement approved improvements to quality, throughput, and cost.Manufacturing Support: Provide machining input for manufacturability, routing, labor estimates, and operation sequencing when requested.Training and Mentoring: Train and mentor operators on setups, inspection, programming, troubleshooting, and safe machining practices.Authority: Stop work; place product, material, tooling, or equipment on hold; and escalate conditions affecting safety, conformity, delivery, or compliance.ADDITIONAL RESPONSIBILITIES:Drive and coordinate the preventive maintenance program for assigned CNC equipment, ensuring required machine checks, operator-level maintenance, and documentation are completed on schedule. Coordinate planned service with Maintenance and promptly escalate equipment, tooling, or maintenance concerns. Perform maintenance activities only within established training and authorization.Accurately record labor, quantities, scrap, material usage, and job status in the applicable production system.Maintain a clean and organized work area and support FOD prevention, 5S, and continuous-improvement activities.Handle, identify, and protect material and product to preserve traceability and prevent damage or mix-ups.Perform other related duties as assigned, consistent with training and the requirements of the position.KEY PERFORMANCE INDICATORSCategory Representative MeasuresSafety & Compliance Safe work practices, PPE, machine checks, FOD/5S, training, and audit compliance.Quality First-pass yield, scrap/rework, dimensional acceptance, nonconformance prevention, and customer escapes.Delivery & Flow Schedule attainment, on-time job completion, setup performance, throughput, and recovery support.Productivity & Assets CNC mill utilization, cycle-time performance, downtime response, and tooling stewardship.People Qualification progress, cross-training, teamwork, and knowledge sharing appropriate to the level.EDUCATION:High school diploma or equivalent is required.Technical or trade education in CNC machining or manufacturing is preferred.An equivalent combination of education, training, and experience may be considered.EXPERIENCE AND QUALIFICATIONSRequired:Five or more years of advanced CNC milling programming, setup, and operating experience, or equivalent demonstrated proficiency.Experience with close-tolerance, complex three-, four-, or five-axis milling, as applicable.Advanced knowledge of G-code, cutting tools, machining parameters, fixtures, workholding, and process optimization.Ability to create or modify CNC programs using CAM software such as Mastercam, Edgecam, or equivalent.Advanced ability to interpret engineering drawings, GD&T, specifications, and first article requirements.Demonstrated ability to troubleshoot complex machining problems and train other operators.Preferred:Aerospace or defense manufacturing experience.Familiarity with AS9100, first article inspection, and controlled manufacturing documentation.Experience machining aluminum, stainless steel, alloy steel, titanium, or nickel-based alloys, as applicable.Lean manufacturing, 5S, or structured problem-solving experience.PERSONAL CHARACTERISTICS:Demonstrates technical leadership, sound judgment, ownership, and commitment to safety and quality.Approaches difficult machining problems analytically and recommends practical solutions.Shares knowledge and develops others without compromising process or documentation controls.Communicates effectively with Production, Quality, Engineering, Planning, Tooling, and Maintenance.PHYSICAL AND WORK REQUIREMENTSAbility to work for a minimum of 8 hours per shift in a manufacturing environment and stand, walk, reach, and use hands for extended periods.Ability to safely handle parts, tooling, fixtures, and material using available lifting assistance when required.Ability to work around moving machinery, metal chips, coolant, oils, and elevated noise while using required PPE.Schedule flexibility to support production needs and occasional overtime or off-shift work.Reasonable accommodations may be made for qualified individuals with disabilities.REPORTING RELATIONSHIPReports to: Manager, Machine Shop & Assembly.Direct reports: None; may provide technical guidance and training but does not exercise supervisory authority unless separately assigned.FLSA classification: Non-Exempt.EOE: (D/V)
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior CNC Machinist (Mills & Lathes) - Multi-Axis Expert
Senior CNC Machinist (Mills & Lathes) - Multi-Axis Expert

Automatic Data Processing, Inc. • Carson City (NV)

On-site
USD 41,000 - 54,000
Senior CNC Machinist - Multi-Axis & Mill-Turn Expert
Senior CNC Machinist - Multi-Axis & Mill-Turn Expert

P & F Industries • Ogle Township (PA)

On-site
USD 47,000 - 61,000
Senior CNC Machinist - Mills or Lathes
Senior CNC Machinist - Mills or Lathes

P & F Industries • Carson City (NV)

On-site
USD 62,000 - 81,000
CNC Milling Operator 2
CNC Milling Operator 2

ERA Industries, Inc. • Phoenix (AZ)

On-site
USD 40,000 - 60,000
Machinist III
Machinist III

Hydro Dyne Engineering • Clearwater (FL)

On-site
USD 42,000 - 66,000
CNC Machinist III - Mills or Lathes
CNC Machinist III - Mills or Lathes

P & F Industries • Ogle Township (PA)

On-site
USD 47,000 - 61,000
COE CNC Machinist - Level 2 (2nd Shift)
COE CNC Machinist - Level 2 (2nd Shift)

Precision Castparts Corp. • South Carolina

On-site
USD 30,000 - 48,000
Senior CNC Machinist II: Multi-Axis Milling & Turning
Senior CNC Machinist II: Multi-Axis Milling & Turning

P & F Industries • Ogle Township (PA)

On-site
USD 41,000 - 55,000
Senior CNC Machinist II: Mills & Lathes (First Shift)
Senior CNC Machinist II: Mills & Lathes (First Shift)

Automatic Data Processing, Inc. • Carson City (NV)

On-site
USD 58,000 - 77,000
CNC Machinist II
CNC Machinist II

Tiffany & Co. • Cumberland (RI)

On-site
USD 60,000 - 90,000