Boilermaker Foreman

Matrix Service Company; Clarksville (AR); On-site; USD 65,000 - 95,000; Full time

Benefits offered by this job

Medical, dental and vision plans

401(k) with company match

Employee stock purchase plan

Wellness program

Adoption assistance

Job summary

Matrix Service Company in Clarksville, AR is seeking a skilled tradesperson for industrial maintenance and fabrication on boiler and pressure vessel projects. You will plan crew workloads, read drawings, and perform field and shop tasks with emphasis on safety and ASME standards.

The role requires hands-on experience, strong teamwork, and the ability to work overtime as needed in a heavy industrial setting. Comprehensive benefits are provided.

Qualifications

• Four or more years in refinery maintenance, turnaround, or construction.
• Ability to interpret technical drawings and schematics.
• Proficiency with standard shop equipment and power tools.
• Must pass Boilermaker Skills Test or NCCER certification.
• Active safety training and drug testing program eligibility.

Responsibilities

• Plan work schedules and match crew members by skill.
• Monitor daily output, record hours, report status to management.
• Guide apprentices and journeymen on technique and trade practices.
• Lead toolbox talks and inspect gear for hazards.
• Ensure work follows ASME codes and safety standards.
• Oversee high-risk tasks at heights or in confined spaces.
• Interpret drawings to determine tools and material needs.
• Dismantle, install, repair, and erect fabricated steel structures.

Skills

Refinery maintenance experience

Turnaround experience

Layout and fabrication skills

Hazard awareness and safety compliance

Education

NCCER certification

Tools

Power tools

Job description

Clarksville, Arkansas
Clarksville, AR 72830, USA

Description

Job Summary

Works under the direction of a general foreman and upper management. Responsible for Planning work schedules and match crew members to appropriate jobs based on skill. Must possess a high level of skills in industrial, maintenance, turnaround, data centers construction / or mechanical environment. Also, must be able to lay-out, fabricate, assemble, bolt-up, flanges, valves, erect or make repairs for all types of structural, boiler and plate work.

Job Functions

• Plans work schedules and match crew members to appropriate jobs based on skill
• Monitors daily output, record hours, and report project status back to management
• Comprehend and execute work assignments across shop and field environments
• Guides apprentices and journeymen on proper technique and trade practices
• Leads toolbox talks, inspect gear, and scan the job site for active hazards
• Ensures all work follows strict industrial standards, such as ASME codes for pressure parts
• Oversee high-risk tasks often performed at great heights or inside confined spaces
• Ability to interpret technical drawings and schematics and determine corresponding tools and material needs for operational workflows
• Must be able to select materials according to suitability for job engineering standards
• Must be able to layout, plate work, pressure vessels, and miscellaneous fabrication
• Must be able to use straightedges, trammels, dividers, squares, tapes, shop Power tools, use of geometry to locate lines, centers, angles, bends and radii, make allowances for shrinkage, expansion, load and stress as identified by design engineer
• Must be able to do field sketches and measurements on repair and construction jobs
• Must be able to operate shop machines such as pantograph, bending rolls, plate shear, punch press, to fabricate parts
• Must know and able to use wrenches, pneumatic hammer, dolly, portable drills, reamers, grinders and torch for fitting and bolting assemblies
• Must be proficient in connecting and securing structural steel (beams, plates, channels, angles) via bolting or alternative fastening techniques
• Must be proficient in operating manual and mechanical lifting equipment, including block and tackle systems, hoists, and winches, to safely position heavy assemblies
• Must be able to dismantle, install, repair, and erect fabricated steel structures for boiler and pressure vessel projects
• Inspect and perform hydrostatic or pneumatic pressure tests on boiler tubes and pressure vessels.
• Perform full-lifecycle heat exchanger services, including inspection, testing, maintenance, and repair.
• Execute rigging tasks and direct crane operators using standard OSHA-compliant hand signals.
• Proficiency with standard shop equipment , including rolls, shears, drill presses, and band saws.
• Must be able to identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards

SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:

• Must have a minimum of four (4) years or more in refinery maintenance/turnaround/or construction experience
• Must have a general knowledge of power and hand tools
• Must be able to pass the Boilermaker Skills Test at or above 70% or complete the NCCER certification for your craft
• Must Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training
• Must be able to obtain and maintain an active status within the approved drug testing program
• Must maintain a current, valid driver's license and pass an MVR as a condition of employmen
• Safety Management training and Client / Site specific training

PHYSICAL REQUIREMENTS:

• Must be willing to work overtime
• Must have the ability to read, write, and communicate effectively
• Must be able to work at elevated heights from ladders, scaffolding, and aerial work platforms
• Must be able to work may include pushing, pulling, lifting or carrying objects weighing up to 50 pounds, such as raw or fabricated material, equipment or tools
• Must be able to perform work, including frequent bending, kneeling, crouching and stooping and occasional climbing onto equipment
• Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long periods of time, up to 12 hours a day
• Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots
• Must have a Valid driver's License

In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.

At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore by joining our organization.

EEO/M/F/Disability/Vets Employer

We are an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

Applicants must be currently authorized to work in the United States on a full-time basis.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.