Assembly - Damar

Zenix Aerospace AMT/Damar; Monroe (WA); On-site; USD 31,684 - 38,572; Full time

Benefits offered by this job

Health Savings Account

Basic Life Insurance

Voluntary Life Insurance

Long-term Disability Insurance

Employee Assistance Program

401k

PTO

Paid holidays

Job summary

Zenix Aerospace AMT/Damar is seeking an Assembly Technician to build aerospace structural sections from parts and subassemblies, following blueprints with hand and power tools. You will install units, fasten components, drill, trim, and verify fits against engineering specs in a busy assembly area.

The role requires attention to detail, reliability, and the ability to read work instructions. Prior aerospace assembly experience is preferred; training on safety procedures and 5-S is provided.

Qualifications

• Must have a good attitude toward work and reliable attendance.
• Follows instructions with strong attention to detail.
• Excellent verbal and written communication.
• Mechanical inclination and manual dexterity.
• Preferred: 1 year aerospace assembly experience.

Responsibilities

• Performs assembly tasks with a high level of skill.
• Performs daily tasks without supervision.
• Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
• Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
• Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
• Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
• Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
• Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
• Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
• Installs bushings using liquid nitrogen or presses as required.
• Applies sealants or paint per customer specifications using proper safety devices.
• Uses shop equipment needed to complete operations, such as C-squeeze, arbor presses, ground stud puller, cherry pullers, and shop hand tools.
• Verifies conformance of finished work piece to specifications using standard measuring tools as required.
• Runs parts that meet engineering specifications without supervision.
• Reads and interprets manufacturing drawings at intermediate level.
• Recognizes production problems, informs supervisor, and makes recommendations for improvements or solutions.
• Performs work instructions completely.
• Follows all safety guidelines established by the Company, including proper use of safety equipment and relevant safety procedures.
• Follows 5-S procedures & works in organized manner. Makes recommendations & takes initiative to improve area.
• Meets job Time Standard without supervision.
• Produces parts with high quality, minimal non-conformances.
• Performs other duties as assigned.

Skills

Good attitude

Reliability

Attention to detail

Verbal & written communication

Mechanical aptitude

Job description

We are a manufacturer of structural parts for the leading original equipment manufacturers (OEM's) in the large business and regional jet markets. Our experience and capabilities span multiple segments of an aircraft, including the engine pylon, struts, wing box, wings, wheel well, and the interior. Our success is based on utilizing proprietary manufacturing techniques to manufacture high quality complex parts through cost effective production.

Given its breadth of capabilities and strong customer relationships, we have substantial content on the aviation industry's most popular aircraft.

Job Description:

*The Assembly position offers level 1 - Journey Lvl. Wage scale provided reflects level 1 - 2.

The Assembly tech assembles aerospace structural sections from parts, subassemblies and components independently and efficiently.

What will my responsibilities include?

• Performs assembly tasks with a high level of skill.
• Performs daily tasks without supervision.
• Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
• Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
• Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
• Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
• Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
• Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
• Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
• Installs bushings using liquid nitrogen or presses as required.
• Applies sealants or paint per customer specifications using proper safety devices.
• Uses shop equipment needed to complete operations, such as C-squeeze, arbor presses, ground stud puller, cherry pullers, and shop hand tools.
• Verifies conformance of finished work piece to specifications using standard measuring tools as required.
• Runs parts that meet engineering specifications without supervision.
• Reads and interprets manufacturing drawings at intermediate level.
• Recognizes production problems, informs supervisor, and makes recommendations for improvements or solutions.
• Performs work instructions completely.
• Follows all safety guidelines established by the Company, including proper use of safety equipment and relevant safety procedures.
• Follows 5-S procedures & works in organized manner. Makes recommendations & takes initiative to improve area.
• Meets job Time Standard without supervision.
• Produces parts with high quality, minimal non-conformances.
• Performs other duties as assigned.

What key skills and experience do I need?

• Demonstrates a good attitude toward work
• Reliable - arrives on time to work with good attendance
• Follows instructions and demonstrates strong attention to detail
• Communicates well verbally and in writing
• Mechanically inclined, with good manual dexterity

Qualifications:

Preferred:

• Minimum 1-year previous assembly experience in the aerospace industry
• Basic shop math skills
• Ability to read and follow work instructions
• Completion of aptitude test during interview process

Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status.

• The Assembler works in the Assembly environment throughout the workday; this environment may include exposure to noise, dust, fumes, etc.
• Possible skin and inhaled contact may occur with various sealants, paints, adhesives, liquid nitrogen, MEK, and chemicals used during assembly or cleaning of parts
• Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required
• Safety training is required and provided by the Company in accordance with applicable law, industry standards, and Company policy

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individuals must stand for much of the workday. May work at different workstations as production needs require, or change from one station to another during assembly process. This position may require overtime and shift changes. Job functions on and around mechanized equipment will present the need for alertness, accuracy and safety awareness. Work activities involve frequent combinations of walking, pushing, pulling, bending, lifting and carrying and standing for extended periods. Work requires the ability to see, hear and smell in order to detect problems. The work requires the ability to occasionally lift and carry up to 40 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Why join Zenix Aerospace AMT/Damar?

We are committed to continuous sustainable growth through superior customer satisfaction. We are dedicated to operating in an ethical, safe, and environmentally responsible manner while providing a rewarding work environment for our employees. Our mission is supported by a culture of teamwork, continuous improvement, and strategic technology investments.

Salary Offering:

$23.00 per hour to $27.75 per hour

Fri/Sat/Sun, 5:00am - 5:30pm (see below for shift premium and shift differential pay)

Zenix Aerospace AMT/Damar offers eligible employees (and eligible family members):

• Health Savings Account
• Basic Life Insurance
• Voluntary Employee, Spouse or Child Life Insurance,
• Long-term Disability Insurance
• Employee Assistance Program

Eligible employees are also offered 401k, PTO, 80 hours of paid holiday per calendar year, and other compensation (as applicable).

Zenix Aerospace AMT/Damar is an equal opportunity employer.