QC Supervisor - Welding

Samsung E&A; Al Jubayl; On-site; SAR 180,000 - 280,000; Full time

Benefits offered by this job

Accommodation

Transportation

Flight Tickets

Medical Insurance

Job summary

Samsung E&A is seeking QA/QC professionals for Fadhili, Saudi Arabia, to plan, inspect, and audit welding processes and related QA/QC activities across disciplines. Responsibilities include reviewing WPS/BPS, managing welder certifications, and delivering weekly status and NCR reports.

Ideal candidates have ASME/API experience, NDT qualifications, and Aramco exposure, with a strong background in oil/gas petrochemical projects and construction supervision.

Qualifications

• The candidate shall have a university degree and a total of seven (7) years of experience in inspection.
• At least three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (e.g.; oil, gas and petrochemical projects, Infrastructure, communication).
• Inspector shall be certified as an American Welding Society CWI, CSWIP 3.1 Certified Welding Inspector, or COMPANY approved equivalent.
• Knowledge of codes such as ASME B 31.3, 31.4 and 31.8, ASME Section V and IX, API 620 and 650, AWS D1.1, required for the execution of the WORK.
• ASNT Level II qualification for NDT methods if NDT forms part of the WORK; certification to VT, MT, PT, RT or UT methods as applicable.
• RTFI certification when Radiographic Testing Film Interpretation is required.

Responsibilities

• Plan, control and perform inspections and tests on discipline Responsible and managing inspectors in the disciplines for which they are responsible.
• Preparation and review of Welding Procedure Specification (WPS) and Brazing Procedure Specification (BPS) along with the supporting Procedure Qualification Record (PQR).
• Preparation and review of all welding related procedures for company approval like shop and field fabrication procedure, welding consumable handling and storage procedure, weld repair procedure, back purging procedure, gap control procedure etc.
• Register welder certifications and monitor quality programs to ensure welder certification and performance are being maintained in accordance with governing codes and standards.
• Preparation and review of project weld status report, welder repair rate report, welder repair assessment and tracer report, weld summary, welder performance and NDT tracking system report which are to be submitted to company on a weekly basis.
• Conduct root-cause analysis on weld repair, identify and implement corrective and preventive measures.
• Lead focus assessment and quality walkthrough at site with subcontractor QC and respective construction personnel to improve quality awareness.
• Monitoring and closing of NCR, LBE or any kind of violation by evaluating root cause and implementing corrective and preventive actions agreed by all involved parties.
• Perform variety of document review, inspection and testing functions to verify subcontractor compliance with requirements.
• Lead and conduct internal audit to ensure that QMS are being implemented effectively.

Skills

Quality Management

QA/QC Planning

Quality Audit

QC Execution

Quality Training

Client Management

Communication

Education

Bachelor's degree

Job description

• Location: Fadhili Gas Increment Program Project
• Department: QAQC

Company Description

SAMSUNG E&A is a specialized EPC company that provides comprehensive solutions across all areas of the plant industry. With strong pride for our pioneering role in the history of the Korean plant industry in the past 50 years, we successfully performed numerous projects around the world and grew into a globally competitive engineering company. We continuously expand our business across the engineering industry including Oil and Gas processing, Refinery, Petrochemical, Energy Transition, Environmental, Industrial and BIO areas. Based on our extensive experience, accumulated technologies and talented resources, we provide various services from the feasibility studies to engineering, procurement, construction, commissioning and O&M.

We are looking for candidates who embody creativity, commitment, and collaboration—professionals who thrive in an innovative environment, are dedicated to excellence, and excel in teamwork.

Join us and be part of a dynamic team where ideas are valued, and collective success drives our future.

Job Description

General Characteristics (Job Summary)

• Responsible for planning and controlling quality activities in given particular disciplines in accordance with quality management system established by QC Manager.
• Plan, control and perform inspections and tests on discipline Responsible and managing inspectors in the disciplines for which they are responsible.

Roles and Responsibilities

• Preparation and review of Welding Procedure Specification (WPS) and Brazing Procedure Specification (BPS) along with the supporting Procedure Qualification Record (PQR).
• Preparation and review of all welding related procedures for company approval like shopand field fabrication procedure, welding consumable handling and storage procedure, weld repair procedure, back purging procedure, gap control procedure etc.
• Register welder certifications and monitor quality programs to ensure welder certification and performance are being maintained in accordance with governing codes and standards.
• Preparation and review of project weld status report, welder repair rate report, welder repair assessment and tracer report, weld summary, welder performance and NDT tracking system report which are to be submitted to company on a weekly basis.
• Conduct root-cause analysis on weld repair, identify and implement corrective and preventive measures.
• Lead focus assessment and quality walkthrough at site with subcontractor QC and respective construction personnel to improve quality awareness.
• Monitoring and closing of NCR, LBE or any kind of violation by evaluating root cause and implementing corrective and preventive actions agreed by all involved parties.
• Perform variety of document review, inspection and testing functions to verify subcontractor compliance with requirements.
• Lead and conduct internal audit to ensure that QMS are being implemented effectively.

Work location is Fadhili, Saudi Arabia.

Qualifications

Education and Experience Requirements

• The candidate shall have a university degree and a total of seven (7) years of experience in inspection, or a high school diploma with a total of ten (10) years of experience in inspection.
• As minimum, the candidate shall have three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (e.g.; oil, gas and petrochemical projects, Infrastructure, communication).
• Inspector shall be certified as an American Welding Society CWI, CSWIP 3.1 Certified Welding Inspector, or COMPANY approved equivalent.
• Inspector shall have a demonstrated background and thorough knowledge of codes such as ASME B 31.3, 31.4 and 31.8, ASME Section V and IX, API 620 and 650, AWS D1.1, required for the execution of the WORK.
• Where Nondestructive Testing (NDT) forms part of the WORK, and Inspector is required to review or ensure NDT programs and results, the candidate shall have been previously qualified and certified to a minimum ASNT Level II in the relevant method(s). When performing, reviewing or ensuring Nondestructive Testing in VT, MT, PT, RT or UT, the candidate shall be certified in the specific method(s).
• When performing, reviewing or ensuring Radiographic Testing Film Interpretation (RTFI), Inspector shall be certified in RTFI.

Key Requirement

• Aramco Experience is needed.
• If you have SAP No. and pass the CBT, please mention it in your CV.

Knowledge

• Technical knowledge in a particular discipline and familiar with related international codes and standards- Investigate and analyze quality issues based on related international codes and standards so that suggesting resolution.
• Skills enough to establish process and system to utilize FMCS and SCMS enabling systematic quality control and conduct training for its operating.
• Capability of quality system establishment and implementation for small scale project (below 0.5 billion dollar).

Job Specific Specialty

• ITP Study
• Prevention and solving inconsistency
• Pre-Inspection
• RFI Management
• Punch Clear Management
• Punch Clear Implementation
• Operation
• Maintenance
• Final Handover

Technical Skills and Competencies

• Quality Management
• QA/QC Planning
• Quality Audit
• QC Execution
• Quality Training
• Client Management
• Communication

Additional Information

Our benefits include

• Accommodation
• Transportation
• Flight Tickets
• Medical Insurance

Samsung E&A follows fair and merit-based recruitment practices. We do not charge any fees during the recruitment process.