Mechanical Quality Engineer

Jones Engineering Group

Saudi Arabia

On-site

SAR 210,000 - 360,000

Full time

21 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Financial support for training
CPD toward chartered status
Performance incentives
Career progression

Job summary

Jones Engineering Group seeks a Mechanical QA/QC Engineer to oversee QA/QC across mechanical works on large-scale projects, including data centre facilities. You will review drawings, implement ITPs, coordinate NDT and welding inspections, and drive continuous improvement under ISO 9001 standards.

The role offers exposure to complex installation, inspection, testing and commissioning activities, with professional development and opportunities for progression.

Qualifications

  • A Degree or Diploma in Mechanical Engineering.
  • 5–8 years of construction experience in Mechanical QA/QC.
  • CSWIP 3.1 certification is preferred.
  • Proven experience in Data Centre, mission-critical, industrial or large-scale projects.
  • Strong knowledge of HVAC systems, chillers, CRAH/CRAC units, AHUs, chilled water systems, pumps, piping and ductwork.
  • Strong knowledge of WPS, PQR, welder qualifications, welding inspection and NDT requirements.
  • Good understanding of ISO 9001 Quality Management Systems and construction quality practices.
  • Experience in preparing and implementing ITPs, method statements, inspection checklists and quality procedures.
  • Strong knowledge of material traceability, NCR management, root cause analysis and corrective actions.

Responsibilities

  • Report to the Project Quality Manager and ensure compliance with project quality requirements and procedures.
  • Develop, implement and monitor the Project Quality Plan, ITPs, method statements and inspection requirements for mechanical works.
  • Review mechanical drawings, specifications, material submittals and installation procedures for compliance.
  • Inspect HVAC systems, chillers, CRAH/CRAC units, AHUs, chilled water systems, pumps, pipework, ductwork and associated equipment.
  • Monitor mechanical installation, material inspections, traceability, storage and preservation.
  • Witness pressure testing, flushing, chemical cleaning, leak testing and other mechanical testing activities.
  • Coordinate on-site and off-site fabrication and welding activities, ensuring compliance with approved drawings, specifications and applicable codes.
  • Review WPS, PQR and welder qualifications, and inspect weld preparation, fit-up, welding activities and consumable control.
  • Coordinate and witness visual inspections and NDT (RT, UT, MT and PT), ensuring compliance with approved ITPs and acceptance criteria.
  • Verify weld traceability, weld maps, material certificates, NDT reports and fabrication records, including weld repairs and re-inspections.
  • Coordinate with construction, engineering and commissioning teams to resolve quality issues and ensure installation compliance.
  • Monitor subcontractor quality performance and coordinate inspections with clients, consultants and third-party inspectors.
  • Manage NCRs, site observations, corrective actions and quality audit findings through to close-out.
  • Prepare, raise and follow up on MIRs and WIRs, ensuring timely inspections and accurate documentation.
  • Maintain mechanical inspection records, test reports and handover dossiers.
  • Support pre-commissioning, commissioning, system completion and punch list close-out activities.
  • Contribute to lessons learned and continuous improvement while ensuring QMS and HSE compliance.

Skills

HVAC systems
NDT inspection
Welding inspection
Quality assurance
Root cause analysis
Technical documentation

Education

Degree in Mechanical Engineering

Job description

We are a leading engineering services company with a proven track record of high quality, customer focused project delivery for over 130 years. Our core divisions include Mechanical Engineering, Electrical Engineering, Sprinkler and Fire Protection. Some of the other services we provide include Waste to Energy (BioEnergy), Specialist Lift, Off Site Fabrication, Technical Support Services, Maintenance, Asset Management, BIM (Building Information Modelling) and Geo-Surveying. We offer competitive salaries, financial support for further training, Continuous Professional Development (CPD) leading to chartered status, performance incentives and the ability to progress your career with a world class engineering contractor.

Job Description

As a Mechanical QA/QC Engineer, you will be responsible for implementing and monitoring quality assurance and quality control activities across all mechanical works on the project. You will ensure that installations, fabrication, inspections and testing comply with approved drawings, project specifications, applicable codes and standards, and client requirements.

The role offers valuable exposure to mechanical systems within large-scale Data Centre projects, including HVAC, chilled water systems, piping, fabrication and critical plant equipment. It provides opportunities to enhance technical expertise and gain hands‑on experience in complex installation, inspection, testing and commissioning activities, supporting continued professional development and career progression.

As part of our commitment to employee development, we provide support for relevant professional certifications, technical training and upskilling, creating opportunities to progress towards senior QA/QC and quality management roles.

Your Responsibilities will include
  • Report directly to the Project Quality Manager and ensure compliance with project quality requirements and procedures.
  • Develop, implement and monitor the Project Quality Plan, ITPs, method statements and inspection requirements for mechanical works.
  • Review mechanical drawings, specifications, material submittals and installation procedures for compliance.
  • Inspect HVAC systems, chillers, CRAH/CRAC units, AHUs, chilled water systems, pumps, pipework, ductwork and associated equipment.
  • Monitor mechanical installation, material inspections, traceability, storage and preservation.
  • Monitor and witness pressure testing, flushing, chemical cleaning, leak testing and other mechanical testing activities.
  • Monitor on-site and off-site fabrication and welding activities, ensuring compliance with approved drawings, specifications and applicable codes.
  • Review WPS, PQR and welder qualifications, and inspect weld preparation, fit-up, welding activities and consumable control.
  • Coordinate and witness visual inspections and NDT (RT, UT, MT and PT), ensuring compliance with approved ITPs and acceptance criteria.
  • Verify weld traceability, weld maps, material certificates, NDT reports and fabrication records, including weld repairs and re‑inspections.
  • Coordinate with construction, engineering and commissioning teams to resolve quality issues and ensure installation compliance.
  • Monitor subcontractor quality performance and coordinate inspections with clients, consultants and third‑party inspectors.
  • Manage NCRs, site observations, corrective actions and quality audit findings through to close‑out.
  • Prepare, raise and follow up on Material Inspection Requests (MIRs) and WIRs, ensuring timely inspections, proper documentation and accurate maintenance of inspection trackers.
  • Maintain mechanical inspection records, test reports, material documentation and handover dossiers.
  • Support pre‑commissioning, commissioning, system completion and punch list close‑out activities.
  • Contribute to lessons learned and continuous improvement while ensuring compliance with company QMS and project HSE requirements.
Skills and Requirements

To excel in this role, you should possess the following skills and qualifications:

  • A Degree or Diploma in Mechanical Engineering.
  • Minimum 5-8 years of construction experience in Mechanical QA/QC.
  • CSWIP 3.1 certification is preferred and will be considered an advantage.
  • Proven experience in Data Centre, mission‑critical, industrial or large‑scale commercial projects.
  • Strong knowledge of HVAC systems, chillers, CRAH/CRAC units, AHUs, chilled water systems, pumps, piping and ductwork.
  • Strong knowledge of WPS, PQR, welder qualifications, welding inspection and NDT requirements.
  • Good understanding of ISO 9001 Quality Management Systems and construction quality practices.
  • Experience in preparing and implementing ITPs, method statements, inspection checklists and quality procedures.
  • Strong knowledge of material traceability, NCR management, root cause analysis and corrective actions.
  • Familiarity with applicable international and GCC standards, including ASME, ASTM, API, ASHRAE, SMACNA and relevant GCC codes and regulations.
  • Strong technical, communication, coordination and problem‑solving skills.
  • Strong written and verbal communication skills.

We offer a competitive salary package commensurate with experience and qualifications. In addition, you will have the opportunity to work in a dynamic and supportive environment, collaborating with industry leaders and contributing to a sustainable future. Our company values work‑life balance and encourages professional growth through training and development programs.

Recognising the contributions and respecting our people is core to our culture and values.

We are an equal opportunities employer.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Site Manager
Quality Site Manager

Jones Engineering Group • Dammam

On-site
SAR 400,000 - 660,000
QA/QC Engineer - Mechanical
QA/QC Engineer - Mechanical

Shapoorji Pallonji Mideast LLC., Riyadh • Riyadh

On-site
SAR 180,000 - 280,000
Quality Inspector - Mechanical
Quality Inspector - Mechanical

HanmiGlobal Co. • Riyadh

On-site
SAR 120,000 - 180,000
QA/QC Engineer (MEP)
QA/QC Engineer (MEP)

Atkins Realis Group • Eastern Province

On-site
SAR 400,000 - 700,000
Mechanical QA/QC Engineer — Data Centre Projects
Mechanical QA/QC Engineer — Data Centre Projects

Jones Engineering Group • Saudi Arabia

On-site
SAR 210,000 - 360,000
Financial support for training
CPD toward chartered status
Performance incentives
+1
QA/QC Engineer
QA/QC Engineer

GEA Grade • Medina

On-site
SAR 140,000 - 220,000
Mechanical Inspector
Mechanical Inspector

Atkins Realis Group • Riyadh

On-site
SAR 300,000 - 450,000
Mechanical Inspector
Mechanical Inspector

Atkins Realis Group • Medina

On-site
SAR 60,000 - 90,000
Tax-free salary
Life insurance coverage
Medical insurance
+6
QC - Mechanical Supervisor
QC - Mechanical Supervisor

SMC International Placement • Medina

On-site
SAR 89,000 - 156,000
Senior Project Quality Specialist - MEP Systems
Senior Project Quality Specialist - MEP Systems

Parsons • Riyadh

On-site
SAR 268,000 - 335,000