RF Electronics Engineer

Open Cosmos

Porto

On-site

EUR 55,000 - 85,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Open Cosmos in Porto, Portugal, seeks an RF Electronics Engineer to design, test and qualify radio hardware for satellites. You’ll work across TT&C links and IoT payloads, using Keysight ADS, AWR Microwave Office and Altium to turn concepts into flight-ready hardware, with hands-on testing and close collaboration with Systems, Flight Software and Mechanical teams.

If you enjoy challenging problems, space-grade design, and rapid growth in a small, mission-driven company, we’d love to hear from

Qualifications

  • Background in Electronic, RF or Telecommunications Engineering.
  • Ability to design, tune and test RF front-ends at UHF and S-band.
  • Knowledge of RF fundamentals: impedance matching, transmission lines, S-parameters, noise figure, linearity, and filtering.
  • Experience testing RF circuits with a VNA, spectrum analyser and signal generator.
  • Experience with RF simulation tools such as Keysight ADS or AWR Microwave Office.
  • Schematic capture and PCB layout in Altium Designer, RF layout awareness.
  • Understanding of analogue and digital design, EMC and noise reduction.
  • Basic MCU firmware skills (C) and familiarity with SPI, I2C, UART and CAN.
  • Awareness of TT&C protocols, IoT standards NB-IoT, LoRaWAN, link budgets, space design principles.
  • Collaborative mindset and willingness to learn fast.

Responsibilities

  • Design, simulate, build and test RF circuits for UHF and S-band.
  • Turn requirements into manufacturable RF hardware via schematic capture and PCB layout.
  • Use Keysight ADS to verify and optimise designs.
  • Tune and characterise transceivers for TT&C links and IoT standards.
  • Write and run test plans from prototype through to qualification and measure performance in the lab.
  • Support environmental and EMC test campaigns, including thermal vacuum and vibration.
  • Work side by side with AIT and Production to integrate, test and debug hardware.
  • Keep clear documentation and feed what you learn in test back into the next design.
  • Collaborate with Systems, Flight Software and Mechanical teams so your designs fit the mission.
  • Bring ideas to the table for our next generation of RF and communication systems.

Skills

RF design
VNA operation
S-parameters
PCB layout RF
IoT protocols NB-IoT LoRaWAN

Education

Electronic/RF or Telecommunications Engineering

Tools

Keysight ADS
AWR Microwave Office
Altium Designer
Schematic capture

Job description

Aim high, go beyond!

At Open Cosmos we are solving the world’s biggest challenges from space, providing businesses, governments and researchers access to more readily available information than ever before - ready for the challenge? Then read on…

Working in our Chief Technology Office (CTO)

The CTO division is where Open Cosmos technology comes to life. Covering engineering, product development, and technical innovation, the team designs, builds, and operates the satellites, systems, and platforms that make our missions possible. It’s a highly collaborative environment where ideas become real hardware, software, and data solutions that deliver impact from space.

We're looking for an RF Electronics Engineer to join our Electronics Team and help design the radios that fly on our satellites. You'll work across TT&C links, IoT payloads and software-defined radio hardware, taking designs from the first schematic all the way to a satellite on the launch pad. If you love getting hands-on with a VNA, enjoy seeing your boards go from simulation to flight, and want to grow fast in a team that builds real space hardware, we'd love to hear from you.

What you'll do
  • Design, simulate, build and test RF circuits for UHF and S-band, including LNAs, power amplifiers, filters, matching networks and transceiver front-ends.
  • Turn requirements into manufacturable RF hardware through schematic capture and PCB layout.
  • Use Keysight ADS (or similar) to verify and optimise designs before they're built.
  • Tune and characterise transceivers for TT&C links and IoT standards such as NB-IoT and LoRaWAN.
  • Write and run test plans from prototype through to qualification, and measure performance in the lab.
  • Support environmental and EMC test campaigns, including thermal vacuum and vibration.
  • Work side by side with AIT and Production to integrate, test and debug hardware.
  • Keep clear documentation and feed what you learn in test back into the next design.
  • Collaborate with Systems, Flight Software and Mechanical teams so your designs fit the mission.
  • Bring ideas to the table for our next generation of RF and communication systems.
What you'll bring
  • A background in Electronic, RF or Telecommunications Engineering.
  • The ability to design, tune and test RF front-ends at UHF and S-band.
  • Sound knowledge of RF fundamentals: impedance matching, transmission lines, S-parameters, noise figure, linearity and filtering.
  • Confidence testing and debugging RF circuits with a VNA, spectrum analyser and signal generator.
  • Experience using RF simulation tools such as Keysight ADS or AWR Microwave Office.
  • Schematic capture and PCB layout skills in Altium Designer (or similar), with an eye for RF layout, grounding and shielding.
  • An understanding of analogue and digital design, EMC and noise reduction.
  • Basic MCU firmware skills (C) and familiarity with SPI, I2C, UART and CAN.
  • Awareness of TT&C protocols, IoT standards (NB-IoT, LoRaWAN), link budgets and design-for-space principles.
  • A curious, collaborative mindset: you ask good questions, take feedback well and enjoy learning fast.

This role will be based in Portugal.

Why Open Cosmos?
  • Work at the cutting edge of space technology with customers around the globe
  • A mission-driven company making space accessible to help solve real-world challenges
  • A diverse, ambitious, and supportive team
Equal opportunity employer

At Open Cosmos, we are dedicated to fostering a workplace built on respect, dignity, and belonging. As an equal opportunity employer, we actively challenge bias to ensure every candidate and employee feels truly welcome. We celebrate diversity in all its forms and are committed to maintaining an inclusive environment where everyone has the opportunity to thrive.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

RF Electronics Engineer
RF Electronics Engineer

Open Cosmos • Coimbra

On-site
EUR 42,000 - 65,000
RF Electronics Engineer, Satellite Front-Ends
RF Electronics Engineer, Satellite Front-Ends

Open Cosmos • Coimbra

On-site
EUR 42,000 - 65,000
RF Electronics Engineer for Spacecraft TT&C & RF Front-Ends
RF Electronics Engineer for Spacecraft TT&C & RF Front-Ends

Open Cosmos • Porto

On-site
EUR 55,000 - 85,000
Radio Frequency Engineer
Radio Frequency Engineer

Tekever • Porto

On-site
EUR 40,000 - 65,000
Meal allowance
Health insurance
Shuttle transport
+2
Radio Frequency Engineer
Radio Frequency Engineer

Tekever Corporation • Porto

On-site
EUR 25,000 - 45,000
Meal allowance
Health insurance
Shuttle service to offices
+2
Senior Mission Manager (Coimbra or Porto)
Senior Mission Manager (Coimbra or Porto)

Open Cosmos Ltd • Porto

On-site
EUR 70,000 - 100,000
Ait Technician
Ait Technician

Entrepreneur First • Viseu

On-site
EUR 35,000 - 55,000
Business Development Manager, IoT
Business Development Manager, IoT

Open Cosmos • Porto

On-site
EUR 45,000 - 70,000
Senior Mission Manager
Senior Mission Manager

Open Cosmos • Porto

On-site
EUR 70,000 - 100,000
Software Engineer
Software Engineer

FOSSA Systems • Lisboa

Hybrid
EUR 38,000 - 60,000
Hybrid work
Flexible working hours
Top locations