Welder

Edisi Optima Sdn Bhd

Kuching

On-site

MYR 42,000 - 70,000

Full time

9 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Edisi Optima Sdn Bhd is seeking a qualified Welder to join the project team in Kuching, Sarawak. You will perform welding works according to approved procedures and standards, ensuring high-quality welds and safe, efficient site operations.

You will read drawings, prepare joints, verify material and process parameters, inspect welds, and maintain records while coordinating with QA/QC and adhering to safety requirements. A strong commitment to workmanship and teamwork is essential.

Qualifications

  • Qualified and competent Welder.
  • Valid welding qualification records or certifications relevant to the assigned welding process and material.
  • Qualification to perform welding works in accordance with an approved Welding Procedure Specification (WPS).
  • Minimum welding position qualification of 1G, or higher where required by the scope of work and project specifications.
  • Sound understanding of Welding Procedure Specification (WPS), Procedure Qualification Record (PQR), and Welder Qualification Test (WQT) requirements.
  • Knowledge of welding QA/QC requirements, inspection procedures, and weld quality acceptance criteria.
  • Ability to read and understand engineering drawings, welding symbols, joint details, and welding instructions.
  • Practical knowledge of welding parameters, joint preparation, welding positions, consumable selection, and common welding defects.
  • Strong commitment to welding quality, workmanship, workplace safety, and effective teamwork.

Responsibilities

  • Perform welding works using approved welding procedures and qualified welding processes.
  • Carry out joint preparation, alignment, fit-up, tack welding, and welding operations in accordance with approved drawings and specifications.
  • Verify welding processes, materials, consumables, positions, and parameters against approved procedure requirements.
  • Inspect completed welds visually to identify cracks, porosity, undercut, incomplete fusion, excessive spatter, and other visible imperfections.
  • Rectify welding defects and perform repair welding in accordance with approved procedures and instructions.
  • Ensure welding machines, equipment, tools, and accessories are suitable and in good working condition.
  • Handle, store, and use welding consumables correctly to prevent contamination and welding defects.
  • Work closely with QA/QC personnel and Welding Inspectors during inspection, testing, and verification activities.
  • Maintain accurate welding records and traceability of welding activities where required.
  • Comply with occupational safety and health requirements, hot work procedures, and site safety regulations.
  • Maintain good housekeeping and a safe, clean working environment throughout welding operations.

Skills

Welder
WPS compliance
Reading drawings
QA/QC awareness
Safety compliance
Joint preparation
Consumables knowledge
Welding parameters
Teamwork

Job description

Join the project team as a Welder, carrying out high-quality welding works in accordance with approved welding procedures, applicable codes and standards, project specifications, and safety requirements. You will ensure completed welds meet the required quality, workmanship, and acceptance criteria while maintaining safe and efficient site operations.

Key responsibilities

Perform welding works using approved welding procedures and qualified welding processes.

Carry out joint preparation, alignment, fit-up, tack welding, and welding operations in accordance with approved drawings and specifications.

Verify welding processes, materials, consumables, positions, and parameters against approved procedure requirements.

Inspect completed welds visually to identify cracks, porosity, undercut, incomplete fusion, excessive spatter, and other visible imperfections.

Rectify welding defects and perform repair welding in accordance with approved procedures and instructions.

Ensure welding machines, equipment, tools, and accessories are suitable and in good working condition.

Handle, store, and use welding consumables correctly to prevent contamination and welding defects.

Work closely with QA/QC personnel and Welding Inspectors during inspection, testing, and verification activities.

Maintain accurate welding records and traceability of welding activities where required.

Comply with occupational safety and health requirements, hot work procedures, and site safety regulations.

Maintain good housekeeping and a safe, clean working environment throughout welding operations.

What we're looking for

Relevant experience as a qualified and competent Welder.

Valid welding qualification records or certifications relevant to the assigned welding process and material.

Qualification to perform welding works in accordance with an approved Welding Procedure Specification (WPS).

Minimum welding position qualification of 1G, or higher where required by the scope of work and project specifications.

Sound understanding of Welding Procedure Specification (WPS), Procedure Qualification Record (PQR), and Welder Qualification Test (WQT) requirements.

Knowledge of welding QA/QC requirements, inspection procedures, and weld quality acceptance criteria.

Ability to read and understand engineering drawings, welding symbols, joint details, and welding instructions.

Practical knowledge of welding parameters, joint preparation, welding positions, consumable selection, and common welding defects.

Strong commitment to welding quality, workmanship, workplace safety, and effective teamwork.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welding Engineer
Welding Engineer

AME Engineering • Kuala Lumpur

On-site
MYR 70,000 - 110,000
Qualified Welder (Manufacturing)
Qualified Welder (Manufacturing)

Dpstar Thermo Control Electric Sdn Bhd • Kajang , Bandar Baru Bangi, Seri Kembangan

On-site
MYR 36,000 - 60,000
Welding Engineer
Welding Engineer

AME Elite Consortium Berhad • Kulai

On-site
MYR 90,000 - 130,000
Welder
Welder

IPS INDUSTRIAL ENGINEERING SDN BHD • Pekan Nanas

On-site
MYR 42,000 - 66,000
PA & Hospitalization Insurance
Annual Leave 10-16 days
Bonus & Annual Increment
Engineer II-Welding Engineer PFA & Plastics Process
Engineer II-Welding Engineer PFA & Plastics Process

Ultra Clean Technology • Penang

On-site
MYR 134,000 - 201,000
QA/QC Inspector (2 Full-Time Positions Available) - Urgently Hiring
QA/QC Inspector (2 Full-Time Positions Available) - Urgently Hiring

IPS INDUSTRIAL ENGINEERING SDN BHD • Pekan Nanas

On-site
MYR 36,000 - 72,000
PA & Hospitalization InsuranceCoverage
Bonus & Annual Increment
Welder
Welder

Maxcode • George Town

On-site
MYR 28,000 - 39,000
Engineer II-Welding Engineer PFA & Plastics Process
Engineer II-Welding Engineer PFA & Plastics Process

UCT • Seberang Perai

On-site
MYR 90,000 - 150,000
Welding Engineer - Quality & NDT Specialist
Welding Engineer - Quality & NDT Specialist

AME Elite Consortium Berhad • Kulai

On-site
MYR 90,000 - 130,000
PIPING WELDING ENGINEER
PIPING WELDING ENGINEER

MIRI STEEL STRUCTURE & CONSTRUCTION SDN. BHD. • Miri

On-site
MYR 60,000 - 120,000