Mechanical Technician

SBM Offshore; Tampico; Presencial; MXN 360 000 - 600 000; Tempo integral

Resumo da oferta

SBM Offshore is a global leader in offshore energy, seeking a Mechanical Technician to perform maintenance and preservation on vessel equipment. You will dismantle, repair, and reassemble systems, ensure isolation and safety, and monitor performance on site.

The role requires SVQ/HNC/HND in Mechanical Engineering, offshore experience, and CMMS/ePTW knowledge; you will report to the Mechanical Supervisor and contribute to safe, compliant operations offshore.

Qualificações

• Offshore maintenance experience or qualification in mechanical engineering.
• Proven ability to dismantle, repair and reassemble equipment safely.
• Experience with hazard assessment, isolation standards and risk controls.
• Knowledge of hydrocarbon processing systems and utilities is preferred.
• Medically fit to work offshore according to company requirements.

Responsabilidades

• Dismantle, repair and reassemble mechanical equipment per procedures.
• Identify hazards prior to work and apply isolation and disconnection rules.
• Carry out tests and monitor equipment to ensure proper reassembly.
• Utilize condition monitoring and documentation in work history.
• Support safety, pollution control and emergency response measures.
• Maintain housekeeping and compliance with permit to work processes.
• Provide clear handover and reporting to supervisor and subordinates.

Conhecimentos

Offshore experience

Maintenance planning

Fault diagnosis

Emergency response

Formação académica

N/SVQ/HNC/HND in Mechanical Engineering

Ferramentas

AMOS/IFS CMMS

ePTW

Descrição da oferta de emprego

Imagine your career taking you to the depths of innovation and the heights of impact. Our people enable continuous progress. Their commitment, collective expertise, and unique capabilities are the engine room behind SBM Offshore’s True. Blue. Transition. - shaping the future of energy, and beyond.

About Us:

SBM Offshore is a global leader in deepwater ocean infrastructure, delivering floating production solutions across the full asset lifecycle—from design and construction to installation and operation. Supported by a global team of more than 8,000 professionals, the Company operates a long‑term, asset‑backed business model that delivers high‑availability assets and predictable cash flows. SBM Offshore combines engineering expertise, operational reliability, and selective innovation to support safe, efficient, and lower‑carbon energy production, while extending its capabilities into new opportunities across the blue economy.

Reports To

• Mechanical Supervisor

Background

• The Technician is responsible for executing maintenance and preservation tasks efficiently and safely to ensure the reliability and longevity of equipment. This role involves performing a variety of maintenance and preservation activities, including but not limited to cleaning, housekeeping, blasting, spraying/painting, isolation and reinstatement, greasing application, and the preservation of topside items like flanges, bolts and valves.
• The technician is also responsible for ensuring that his supervisor is made aware of all activities according to procedure, especially when safety is an issue.
• The technician/operator will demonstrate exemplary safety awareness and technical competence in all aspects of maintenance and preservation work on and around the vessel.

Authority

• A Mechanical Technician is authorized to maintain and repair vessel mechanical equipment and systems.

Immediate Subordinates

• Subcontractors, Visitors, Vendor Representatives Instrumentation probationer techs.

Accountable For: Responsibilities & Standards

• 1) Dismantle Repair and Reassemble Mechanical Equipment.
• 1 Identify potential sources of hazard prior to dismantling.
• 2 Use correct procedures and correct method of dismantling.
• 3 Carry out the correct isolation and disconnection procedure.
• 4 Identified, checked and prepared components.
• 5 Apply appropriate tests and test equipment to ensure reassembly is correct and effective.
• 2) Use of Condition Monitoring on Mechanical Equipment.
• 1 Adjust instruments to meet the operating specification.
• 2 Make adjustments with minimum disruption to any ongoing activities and minimum waste of resources.
• 3 Monitor and record what has been carried out in work history or log.
• 3) Diagnose faults in Mechanical Equipment.
• 1 Respond promptly to problems in line with approved procedures.
• 2 Select appropriate tests and diagnostic procedures and apply them methodically.
• 3 Carry out Visual, Close and Detailed inspections on Mechanical equipment.
• 4 Use the results of inspections to determine the appropriate actions to take.
• 5 Record an accurate and full description in the appropriate document history.
• 4) Monitor and Maintain Pollution Control Measures.
• 1 Unplanned discharges to the environment are identified, halted where possible, and reported according to policy, procedure and regulation.
• 2 Relevant PPE is used to deal with unplanned discharges using company procedures.
• 3 Equipment, waste or other materials for disposal are dealt with according to the correct procedure.
• 4 Environmental protection and pollution control are enforced effectively with colleagues, subordinates and contractors.
• 5) Contribute to The Health and Safety of the Working Environment
• 1 Work area within your own responsibility is kept clean and free of hazards.
• 2 Positive action is taken to stop hazards and unsafe behaviors.
• 3 Alarms are raised as appropriate and/or acted upon using applied policies and procedures or initiative.
• 4 All potential and actual incidents are reported to the relevant supervisor.
• 6) Emergency Response
• 1 Carry Out Emergency Response role (See Station Bill).
• 2 Demonstrate competence in Emergency Response drills and exercises.

Recruitment Only-Generic Functional Competencies

• Offshore - Demonstrate an Understanding of PandIds
• Offshore - Routine Servicing of Systems and Equipment
• Offshore - Rectifying Faults in Systems and Equipment
• Offshore - Handover
• Offshore - Emergency Response
• Offshore - Diagnosis and Fault Finding
• Offshore - Planning Work
• Offshore - Dismantling, Repair and Reassemble Equipment
• Offshore - Safety Management

Pre-hire Qualifications And Experience

• FOR GENERAL MECHANICAL TECHNICIAN
• Proven experience and/or qualified to N/SVQ/HNC/HND in Mechanical Engineering or local equivalent.
• 3 years’ experience desired with offshore experience preferred.
• Experience and knowledge of hydrocarbon processing systems and utilities.
• Good experience of Permit to Work, Mechanical Isolation Standards and Risk Assessment.
• Medically fit according to The Company GEMS Instruction Health Requirements to Work Offshore.
• FOR PSV CALIBRATION MECHANICAL TECHNICIAN
• Proven experience and/or qualified to N/SVQ/HNC/HND in Mechanical Engineering or local equivalent.
• Proven experience and/or qualified In PRV/PSV calibration or local equivalent.
• 3 years’ experience desired with PSV calibration (offshore preferred).
• Experience and knowledge of hydrocarbon processing systems and utilities.
• Good experience of Permit to Work, Mechanical Isolation Standards and Risk Assessment.
• Medically fit according to The Company GEMS Instruction Health Requirements to Work Offshore.
• FOR CRANE AND HYDRAULIC MECHANICAL TECHNICIAN
• Proven experience and/or qualified to N/SVQ/HNC/HND in Mechanical Engineering or local equivalent.
• Minimum of 5 years of extensive experience in Hydraulic Cranes Maintenance. Offshore environment would be preferable.
• Good knowledge and understanding of Crane and Lifting International Standards
• Good knowledge of CMMS systems such as AMOS / IFS and ePTW
• Strong planning & organizational skills
• Experience and knowledge of hydrocarbon processing systems and utilities.
• Good experience of Permit to Work, Mechanical Isolation Standards and Risk Assessment.
• Medically fit according to The Company GEMS Instruction Health Requirements to Work Offshore.