Pipeline Process Engineer - Oil and Gas Sector Confidential Company

Kuwait OFW; al-Ahmadi; Sur place; KWD 15 000 - 23 000; Plein temps

Résumé du poste

Confidential Company in Al Ahmadi, Kuwait is seeking a senior Pipeline Process Engineer to support oil and gas transmission networks. The role focuses on hydraulics, process design and operational readiness.

You will develop hydraulic models, review design bases, and provide field-implemented solutions for safe, efficient operation. Requires 10+ years in oil and gas with pipeline experience; Kuwait-based or transferable visa preferred.

Qualifications

• Bachelor’s degree in chemical engineering, Process Engineering or related field.
• Minimum 10 years of oil and gas engineering experience, including at least 5 years involving pipelines or transmission networks.
• Experience in pipeline hydraulics, process calculations, troubleshooting and operational support.

Responsabilités

• Perform hydraulic calculations for gas and liquid pipelines (pressure drop, velocity, sizing).
• Develop and validate hydraulic models against operating data and address contingencies.
• Prepare design bases, P&IDs, heat and material balances and operating philosophies.
• Provide engineering support for pipeline operation, flow and pressure management and abnormal conditions.
• Review contractor submissions and vendor documents for technical adequacy and operability.
• Coordinate with stakeholders and ensure handover documents meet requirements.

Connaissances

Pipeline hydraulics

Process calculations

Troubleshooting

Operational support

Pigging

Depressurization

Network optimization

Gas/liquid hydrocarbons

Formation

Bachelor's degree in chemical engineering

Description du poste

# Pipeline Process Engineer - Oil and Gas Sector Confidential CompanyMultiple VacanciesEmployer ActivePosted 12 hrs agoSend me jobs like thisExperience10 - 15 YearsJob LocationAl Ahmadi - KuwaitEducationBachelor of Technology/Engineering (Chemical)NationalityAny NationalityGenderMaleVacancy3 VacanciesJob DescriptionRoles & ResponsibilitiesProvide process and pipeline engineering support for the safe, reliable and efficient operation of hydrocarbon transmission networks and associated facilities, including fuel gas and liquid fuel systems.The role covers pipeline hydraulics, process performance, operating constraints, troubleshooting, modifications and development of associated facilities, including manifolds, pumping and compression facilities, pressure-control systems, metering interfaces and pigging systems.Develop and maintain the engineering basis for operating decisions, capacity assessments, modifications and network expansion within the assigned scope and delegated authority.**Key Responsibilities:** **Pipeline Hydraulics and Network Performance*** Perform and review hydraulic calculations for gas and liquid pipelines, including pressure drop, velocity, pipeline sizing, capacity, gas line pack and delivery-pressure requirements.* Assess network performance under normal, peak-demand, minimum-flow, shutdown and contingency conditions.* Evaluate the effects of source availability, consumer demand, alternative routing, pipeline outages and equipment limitations.* Develop, maintain and validate hydraulic models against available operating data, documenting assumptions, fluid properties, reference conditions and limitations.* Identify the need for transient, surge or multi phase assessments and perform or coordinate specialist studies, as appropriate.* Recommend operating envelopes, debottlenecking measures and network improvements supported by documented engineering assessments. **Process Engineering and Technical Documentation*** Prepare and review design bases, process flow diagrams, piping and instrumentation diagrams, heat and material balances, process data sheets and operating philosophies.* Perform and review process calculations for equipment sizing, pressure control, flow measurement and associated facilities.* Review engineering studies, contractor submissions and vendor documentation for technical adequacy, operability, maintainability and compatibility with existing facilities.* Verify consistency between engineering documents, available as-built records, field configuration and operating conditions, and initiate resolution of discrepancies.**Operational Support and Troubleshooting:*** Provide engineering support for pipeline operation, flow and pressure management, operating configurations, product quality and abnormal conditions.* Investigate unexpected pressure losses, capacity restrictions, liquid accumulation, unstable control and other process-related abnormalities.* Assess the effects of equipment unavailability, maintenance activities, source changes and consumer interruptions on network operation.* Translate engineering findings into practical operating limitations, precautions and recommendations. **Fluid Properties, Fuel Quality and Blending:*** Assess pipeline suitability for cleaning, gauging and in-line inspection activities against the requirements of the proposed pig or inspection tool.* Review internal restrictions, valve passage, bends, fittings, launcher and receiver arrangements, and available driving conditions.* Support pig selection and review operating requirements, including flow, differential pressure, velocity control, tracking and receiving arrangements.* Assess liquid handling, product displacement and operational constraints associated with pigging activities.* Develop or review technical requirements and contingency arrangements for abnormal pigging conditions, including a stalled or stuck pig.* Verify that pigging recommendations are supported by adequate pipeline information, suitable **Isolation, Depressurization and Recommissioning:*** Develop and review the process basis for isolation, draining, depressurization, purging, inverting, preservation and recommissioning activities.* Assess relevant fluid behavior and hazards, including flashing, low-temperature effects, hydrate formation, trapped pressure and thermal expansion, where applicable.* Evaluate the suitability and capacity of proposed recovery, disposal or receiving systems.* Define process conditions and verification requirements for safe introduction or removal of hydrocarbons.* Identify the need for specialist assessments and incorporate their findings into engineering recommendations.* Support preparation and review of activity-specific procedures and readiness requirements before execution**Pipeline Integrity and Third-Party Activities:*** Assess the process and operational implications of inspection findings, integrity concerns, proposed repairs and temporary or permanent operating restrictions.* Provide relevant operating conditions, fluid properties and engineering information to support integrity assessments.* Review proposed third-party activities affecting pipelines, including crossings, access roads, excavation and adjacent construction, within the assigned engineering scope.* Identify the need for specialist civil, structural, mechanical or pipeline-integrity review.* Verify that technical assessments reference applicable requirements and controlled document revisions.* Incorporate approved restrictions and recommendations into relevant engineering assessments and operating documentation.**Projects, Commissioning and Handover:*** Develop and evaluate proposals for network expansion, capacity enhancement, reliability improvement and replacement of existing facilities.* Review project deliverable for compatibility with existing systems and operating requirements.* Assess tie-in requirements, shutdown implications, temporary configurations and commissioning constraints.* Prepare or review process requirements for commissioning, start-up and performance verification.* Define and review technical acceptance criteria within the assigned scope.* Review handover documentation, outstanding technical issues and operating limitations before recommending acceptance.* Verify that design, execution, testing, acceptance and subsequent operating responsibilities are clearly defined.**Technical Coordination, Reporting and Knowledge Transfer:*** Coordinate with relevant internal and external stakeholders on engineering, operational and project requirements.* Prepare technical reports, memorandum, review comments, meeting records and decision-support briefs.* Support supply-demand and contingency assessments by identifying network constraints, available options and technical limitations.* Maintain assigned engineering records and support updates to operating manuals and technical procedures.* Communicate significant risks, unresolved issues and required decisions clearly and promptly.Desired Candidate Profile* Bachelor’s degree in chemical engineering, Process Engineering or a closely related engineering discipline with demonstrated relevant process-engineering competence.* Minimum 10 years of relevant oil and gas engineering experience, including at least 5 years directly involving hydrocarbon pipelines, transmission networks or associated facilities.* Demonstrated hands-on experience in pipeline hydraulics, process calculations, troubleshooting, technical-document review and operational support.* Experience in both gas and liquid hydrocarbon systems, with depth appropriate to the assigned assets.* Practical exposure to process safety, Management of Change, commissioning and modifications to operating facilities.* Experience in pigging, depressurization, gas quality or network optimization is desirable, according to the assigned scope.* Kuwait based Vs Transferable Visa* Kuwait Driving License