Senior Layout Engineer

IONION

Lombardia

Hybrid

EUR 50,000 - 65,000

Full time

26 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Smart working with flexible hours and
Competitive salary (RAL)
Up-to-date Cadence toolchain andremote

Job summary

IONION, a Milan-based semiconductor startup, is seeking a Senior Layout Engineer to own the backend of our first chips, from schematic to verified tape-out-ready layout for the foundry (TSMC 65/55nm preferred). We will build the layout and sign-off flow from the ground up, establishing the foundation for future products.

You will lead full-custom layout of analog and digital blocks, manage floorplanning, verification, and sign-off, and set up the backend flow with Cadence tools.

Qualifications

  • Degree (Laurea / MSc or BSc) in Electronic Engineering, Physics or related field, or equivalent professional experience
  • 6+ years of hands-on full-custom IC layout experience, including several tape-outs with full-chip sign-off and handoff to the foundry
  • Solid experience on 65nm-class CMOS nodes (approx. 55–90nm)
  • Strong command of Cadence custom design environment: Virtuoso Layout Suite (XL/EXL), Virtuoso Schematic, and Cadence physical verification (PVS/Pegasus) and/or Siemens Calibre
  • Experience with parasitic extraction tools (e.g. Quantus, Calibre xRC/xACT, StarRC)
  • Ability to read schematics and understand circuit sensitivities well enough to make good layout trade-offs autonomously

Responsibilities

  • Develop full-custom layout of analog and mixed-signal blocks (e.g. op-amps, bandgaps, LDOs, ADC/DAC, PLL, bias circuits, I/O, ESD) and custom digital cells
  • Plan and execute block- and chip-level floorplanning, power/ground distribution and top-level integration, including pad ring and seal ring
  • Apply best practices for device matching, symmetry, common-centroid/interdigitation, shielding, guard rings, latch-up and noise isolation
  • Address electromigration, IR drop, antenna effects, density/fill and DFM requirements
  • Run and close physical verification (DRC, LVS, ERC, antenna, density) and support parasitic extraction (RC) for post-layout simulation
  • Iterate with circuit designers on layout-dependent effects (LDE/WPE, STI stress) and parasitic optimization
  • Own tape-out preparation end to end: full-chip sign-off with the foundry rule decks, dummy fill, seal ring, chip ID/logo, final GDSII/OASIS, tape-out forms and checklists, and handoff to the foundry or MPW provider, acting as the main technical contact for any foundry questions
  • Set up and maintain the Cadence-based backend flow from scratch, PDK integration, scripts (SKILL/Python/Tcl) and reusable layout templates
  • Estimate effort and schedule for layout activities and, as the team grows, mentor junior layout engineers

Education

Laurea / MSc or BSc in Electronic Engineering, Physics or related field

Tools

Cadence Virtuoso
Calibre
SKILL scripting
TSMC 65nm/55nm

Job description

Location: Milan, Italy – smart working (flexible remote, occasional on-site days in Milan)

Seniority: Senior (6+ years)

Location: Milan, Italy – smart working (flexible remote, occasional on-site days in Milan)

Contract: Full-time, permanent (contratto a tempo indeterminato) – CCNL Metalmeccanico

Seniority: Senior (6+ years)

Compensation: RAL €50,000 – €65,000 (gross, 13 monthly payments) + benefits

About us

IONION is a Milan-based semiconductor startup designing focused on transforming the semiconductor industry through advanced, customizable processor solutions that are secure, high-performing, and cost-effective . We are a small team taking silicon from concept to production, and every engineer has a direct impact on the product and on how we build our design flow. We are now looking for a Senior Layout Engineer to own the physical implementation of our chips.

The role

You will own thebackend of our first chips: taking our designers' schematics to a complete, verified, tape-out-ready database and handing it off for manufacturing (TSMC 65/55nm preferred). That covers full-custom layout of custom digital blocks and small analog blocks, top-level integration and full-chip physical verification, through to the final GDSII and the tape-out package for the foundry. Because these are the company's first tape-outs, you will also build the layout and sign-off flow from the ground up, and it will be the foundation for every product that follows.

Key responsibilities
  • Develop full-custom layout of analog and mixed-signal blocks (e.g. op-amps, bandgaps, LDOs, ADC/DAC, PLL, bias circuits, I/O, ESD) and custom digital cells
  • Plan and execute block- and chip-level floorplanning, power/ground distribution and top-level integration, including pad ring and seal ring
  • Apply best practices for device matching, symmetry, common-centroid/interdigitation, shielding, guard rings, latch-up and noise isolation
  • Address electromigration, IR drop, antenna effects, density/fill and DFM requirements
  • Run and close physical verification (DRC, LVS, ERC, antenna, density) and support parasitic extraction (RC) for post-layout simulation
  • Iterate with circuit designers on layout-dependent effects (LDE/WPE, STI stress) and parasitic optimization
  • Own tape-out preparation end to end: full-chip sign-off with the foundry rule decks, dummy fill, seal ring, chip ID/logo, final GDSII/OASIS, tape-out forms and checklists, and handoff to the foundry or MPW provider, acting as the main technical contact for any foundry questions
  • Set up and maintain the Cadence-based backend flow from scratch, PDK integration, scripts (SKILL/Python/Tcl) and reusable layout templates
  • Estimate effort and schedule for layout activities and, as the team grows, mentor junior layout engineers
Required qualifications
  • Degree (Laurea / MSc or BSc) in Electronic Engineering, Physics or a related field, or equivalent professional experience
  • 6+ years of hands-on full-custom IC layout experience, including several tape-outs where you owned full-chip sign-off and the handoff to the foundry
  • Solid experience on 65nm-class CMOS nodes (approx. 55–90nm)
  • Strong command ofCadencecustom design environment: Virtuoso Layout Suite (XL/EXL), Virtuoso Schematic, and Cadence physical verification (PVS/Pegasus) and/or Siemens Calibre
  • Experience with parasitic extraction tools (e.g. Quantus, Calibre xRC/xACT, StarRC)
  • Ability to read schematics and understand circuit sensitivities well enough to make good layout trade-offs autonomously
Preferred qualifications
  • Direct experience withTSMC 65nm / 55nmPDKs and TSMC tape-out procedures
  • SKILL scripting for layout automation and PCell development
  • Exposure to mixed-signal top-level integration with digital place-and-route blocks (e.g. Cadence Innovus)
  • Experience working with foundry/MPW shuttle services
  • Startup or small-team experience, comfortable owning work end to end
What we offer
  • Smart working with flexible hours and a Milan office for collaboration days
  • Competitive salary (RAL)
  • Up-to-date Cadence toolchain and remote-ready workstation setup
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior IC Layout Engineer – Remote with Milan Office
Senior IC Layout Engineer – Remote with Milan Office

IONION • Lombardia

Hybrid
EUR 50,000 - 65,000
Smart working with flexible hours and
Competitive salary (RAL)
Up-to-date Cadence toolchain andremote
Senior Analog IC Layout Engineer – Transistor-Level Design
Senior Analog IC Layout Engineer – Transistor-Level Design

Move Silicon • Lucca

On-site
EUR 48,000 - 64,000
Bonus annuale
Mensa interna
Assicurazione sanitaria
+1
Senior IC Lead – Analog / Mixed-Signal | Milan
Senior IC Lead – Analog / Mixed-Signal | Milan

MRL Consulting Group • Milano

Hybrid
EUR 90,000 - 100,000
ESOP
Senior IC Lead – Analog / Mixed-Signal | Milan
Senior IC Lead – Analog / Mixed-Signal | Milan

MRL Consulting Group | Global Niche Technology Recruitment • Lombardia

Hybrid
EUR 90,000 - 100,000
ESOP
Principal Analog IC Layout Engineer
Principal Analog IC Layout Engineer

NXP Semiconductors NV • Lombardia

On-site
EUR 61,000 - 84,000
Analog IC Layout Engineer (Permanent Staff Leasing Contract)
Analog IC Layout Engineer (Permanent Staff Leasing Contract)

Huawei Technologies Italia • San Giuseppe

On-site
EUR 47,000 - 60,000
Physical ASIC Design Implementation Engineer - Naples, IT
Physical ASIC Design Implementation Engineer - Naples, IT

Imec • Napoli

On-site
EUR 90,000 - 120,000
Senior Analog Layout Engineer
Senior Analog Layout Engineer

ADENTIS Italia • Lombardia

On-site
EUR 40,000 - 60,000
Analog Layout Engineer
Analog Layout Engineer

ADENTIS Italia • Lombardia

On-site
EUR 30,000 - 40,000
Formazione continua su hard e soft
Follow-up HR e Business Manager
Opportunità di crescita
Sr Staff Layout Engineer
Sr Staff Layout Engineer

Renesaselectronics • Sicilia

On-site
EUR 62,000 - 83,000