Walk-in | Quality CON

VMix Mineral

Bengaluru

Presencial

INR 450.000 - 700.000

Jornada completa

hace 33 horas
Sé de los primeros/as/es en solicitar esta vacante

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Descripción de la vacante

VMix Mineral in Bengaluru seeks a QA/QC Inspector/Engineer to lead material inspections, in-process checks, and final quality assurance for heavy mechanical equipment. You will ensure conformity to drawings, welding standards, and NDT requirements while maintaining QC documentation and supplier conformity.

The role covers dimensional checks, hydrostatic tests, and CAPA actions, with collaboration across production, design, and clients.

Formación

  • Diploma/BE/BTech in Mechanical Engineering.
  • 2-5 years of QA/QC in industrial mechanical equipment manufacturing, fabrication or heavy engineering.
  • Experience in fabrication and inspection of tanks, thickeners, agitators, pressure vessels, hoppers and structural equipment.
  • Knowledge of ASME, AWS, IS and ISO standards.
  • Basic MS Excel and Word; AutoCAD is a plus.

Responsabilidades

  • Perform incoming material inspection and verify material specifications against approved drawings, PO and technical requirements.
  • Inspect raw materials, plates, pipes, structural sections, welding consumables and bought-out components.
  • Carry out in-process inspections during fabrication, machining, assembly and manufacturing activities.
  • Conduct final inspection of fabricated equipment before painting, packing and dispatch.
  • Ensure products are manufactured as per approved drawings, specifications and standards.
  • Monitor welding activities and verify welder qualifications and parameters.
  • Coordinate NDT activities (DPT, MPT, UT, RT) wherever applicable.
  • Carry out dimensional inspections of tanks, thickeners, agitators and structural assemblies.
  • Prepare and maintain ITPs, QC Plans, inspection reports and MRBs.
  • Conduct hydrostatic/leak tests and verify surface prep, DFT, and painting thickness.
  • Identify NCRs; implement CAPA and drive corrective actions.
  • Coordinate with customers and third-party inspectors; submit daily quality reports.

Conocimientos

Attention to detail
Communication
Problem-solving
Coordination
Willingness to travel

Educación

Diploma / B.E. / B.Tech in Mechanical Engineering
Additional certification in Quality Control / Quality Assurance

Herramientas

MS Excel
MS Word
AutoCAD
Vernier Caliper
Micrometer
Measuring Tape
Height Gauge
Weld Gauge
Welding processes (WPS/PQR)
NDT methods (DPT, MPT, UT, RT)

Descripción del empleo

Role & responsibilities
Quality Inspection & Control
  • Perform incoming material inspection and verify material specifications against approved drawings, purchase orders and technical requirements.
  • Inspect raw materials, plates, pipes, structural sections, welding consumables and bought-out components.
  • Carry out in-process inspections during fabrication, machining, assembly and manufacturing activities.
  • Conduct final inspection of fabricated equipment before painting, packing and dispatch.
  • Ensure products are manufactured as per approved drawings, specifications and applicable quality standards.
2. Welding & Fabrication Quality
  • Monitor welding activities and ensure compliance with approved WPS and PQR.
  • Verify welder qualifications and welding parameters.
  • Inspect fit-up, root gap, weld size, alignment and dimensional accuracy.
  • Coordinate and monitor NDT activities such as DPT, MPT, UT and RT, wherever applicable.
  • Identify welding defects and ensure corrective actions are implemented.
3. Dimensional Inspection
  • Carry out dimensional inspections of fabricated equipment such as tanks, thickeners, agitators, hoppers, chutes and structural assemblies.
  • Verify equipment dimensions, tolerances, levels, alignment, concentricity and mounting arrangements.
  • Ensure dimensional compliance with approved GA and fabrication drawings.
4. Documentation & Quality Records
  • Prepare and maintain Inspection and Test Plans (ITP), Quality Control Plans and inspection reports.
  • Review and maintain Material Test Certificates (MTC), heat treatment certificates and material traceability records.
  • Prepare inspection reports, welding reports, NDT reports and final quality documentation.
  • Prepare and maintain Manufacturing Record Books (MRB) and Quality Dossiers.
  • Coordinate with clients and third-party inspection agencies for stage-wise inspections.
5. Testing & Final Inspection
  • Conduct hydrostatic / leak tests wherever applicable.
  • Inspect equipment assembly, mechanical clearances and fitment.
  • Verify surface preparation, sandblasting, primer and final painting thickness using DFT measurements.
  • Ensure proper identification, marking, preservation and packing before dispatch.
6. Quality Improvement
  • Identify non-conformities and raise Non-Conformance Reports (NCR).
  • Coordinate with production and design departments to resolve quality issues.
  • Implement corrective and preventive actions (CAPA).
  • Minimize rework, rejection and material wastage.
  • Ensure compliance with ISO 9001 and applicable industry standards.
7. Coordination & Reporting
  • Coordinate with production, design, purchase and project departments.
  • Coordinate with customers and third-party inspection agencies during inspections.
  • Monitor quality at various manufacturing stages and submit daily inspection and quality status reports.
* Preferred candidate profile :
Educational Qualification
  • Diploma / B.E. / B.Tech in Mechanical Engineering.
  • Additional certification in Quality Control / Quality Assurance will be an advantage.
Experience
  • 2-5 years of experience in QA/QC in industrial mechanical equipment manufacturing, fabrication or heavy engineering industries.
  • Experience in fabrication and inspection of tanks, thickeners, agitators, pressure vessels, hoppers, chutes and structural equipment is preferred.
Technical Skills
  • Good knowledge of mechanical engineering drawings and fabrication drawings.
  • Knowledge of welding processes, WPS, PQR and welder qualification requirements.
  • Familiarity with ASME, AWS, IS and ISO standards.
  • Knowledge of dimensional inspection instruments such as Vernier Caliper, Micrometer, Measuring Tape, Height Gauge and Weld Gauge.
  • Knowledge of NDT methods (DPT, MPT, UT and RT).
  • Knowledge of surface preparation, painting inspection and DFT measurement.
  • Ability to prepare inspection reports, quality documentation and manufacturing quality dossiers.
  • Basic knowledge of MS Excel, Word and AutoCAD will be an advantage.
Personal Attributes
  • Strong attention to detail and quality consciousness.
  • Good communication and coordination skills.
  • Ability to independently handle shop-floor quality inspections.
  • Problem-solving and analytical skills.
  • Ability to coordinate with customers and third-party inspection agencies.
  • Willingness to travel to customer sites whenever required.
3. Key Performance Indicators (KPIs)

* Performance Area

* Expected Result

* Incoming material inspection

* 100% compliance with inspection requirements

* In-process quality

* Minimize manufacturing defects

* Dimensional accuracy

* Compliance with approved drawings

* Welding quality

* Minimize weld rejection and rework

* Documentation

* Complete and timely QC records

* Final inspection

* Zero major quality deviations

* NCR management

* Timely closure of NCRs

* Dispatch clearance

* Ensure quality approval before dispatch

4. Additional Advantage

Candidates having experience in the following equipment manufacturing activities will be preferred:

  • Thickener manufacturing and assembly.
  • Industrial agitators and mixing systems.
  • Flocculant dosing systems.
  • Mineral processing and material handling equipment.
  • Industrial storage tanks and process vessels.
  • Heavy structural fabrication.
  • Sandblasting, painting and surface treatment.
  • Site erection, installation and commissioning inspection.
Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Quality Engineer Industrial Machinery & Fabrication
Quality Engineer Industrial Machinery & Fabrication

Aren Rendering Solutions • Shadnagar

Presencial
INR 600.000 - 1.000.000
Transport facility
Accommodation for relocating employees
Food facility
Quality Control Engineer
Quality Control Engineer

Technoforce Solutions • Nashik District

Presencial
INR 600.000 - 800.000
Workshop QA Engineer (Medium & Heavy Structural Fabrication)
Workshop QA Engineer (Medium & Heavy Structural Fabrication)

Inspax Inspection And Certification Consultants • Hyderabad

Presencial
INR 335.000 - 670.000
General Manager - QA & QC
General Manager - QA & QC

Remi Process Plant And Machinery • Palghar

Presencial
INR 2.800.000 - 4.600.000
Quality Control Engineer
Quality Control Engineer

Wahal Process Technologies • Murthal

Presencial
INR 600.000 - 900.000
PF and statutory benefits
Growth path to Senior QC Engineer / QA
Quality dossier ownership
Quality Engineer
Quality Engineer

Halleysblue Steels • Ballari District

Presencial
INR 350.000 - 600.000
Assistant Manager - Quality
Assistant Manager - Quality

Chart Industries • Srikakulam

Presencial
INR 1.400.000 - 2.000.000
Senior Quality Engineer (Feed)
Senior Quality Engineer (Feed)

Newage Fire Protection Industries • Khopoli

Presencial
INR 900.000 - 1.700.000
Deputy Manager - FQA (Mech) - TPP
Deputy Manager - FQA (Mech) - TPP

Adani Power Ltd. • Madhya Pradesh

Presencial
INR 700.000 - 1.100.000
Qa Engineer
Qa Engineer

Jashubhai Group • Navi Mumbai, Ahmednagar

Presencial
INR 700.000 - 1.100.000