Walk-in | Cnc Machine Shop Engineer

Larsen & Toubro Limited

Hazira

On-site

INR 600,000 - 900,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Larsen & Toubro (L&T) is seeking an experienced manufacturing supervisor to lead CNC-based valve parts machining. You will guide a team in complex setups, ensure quality, and implement continuous improvements in a fast-paced plant in India.

The role requires expertise in CNC programming, GD&T, metrology, and Lean manufacturing, with a focus on safety and reliability. Collaboration with engineering and production teams is essential to meet throughput targets.

Qualifications

  • More than 5 years of experience in complex valve parts machining on CNC machines.
  • Experience with 5-axis, 4-axis, turn-mill, mill-turn and HMC/VMC machines.
  • Proficient in CNC programming and tool selection for turning and milling.
  • Strong blueprint reading with GD&T knowledge and metrology skill.
  • Familiar with TPM/Lean manufacturing and Six Sigma concepts.
  • Knowledge of safety measures relevant to each job assignment.

Responsibilities

  • Supervise and coordinate activities of workers in machine operations, setup, and maintenance.
  • Set daily/weekly/monthly objectives and communicate them to employees.
  • Oversee quality control to ensure products meet standards.
  • Adhere to safety regulations to maintain a safe work environment.
  • Collaborate with supervisors and management to meet production goals.
  • Resolve grievances or escalate to higher management as needed.
  • Estimate, requisition, and inspect materials.
  • Collaborate with engineering to optimize processes.
  • Monitor productivity and improve machine utilization and OEE.
  • Develop FTP for NPD and prepare work instructions, tool lists, and inspection methods.
  • Resolve technical issues and implement continuous improvement for capacity.
  • Analyze rejections and drive corrective actions to prevent recurrence.
  • Maintain QMS documents for central machine SOPs.
  • Achieve First Pass Yield targets and drive cost-saving initiatives.
  • Apply Industry 4.0 TPM–Trak for productivity monitoring and downtime reduction.
  • Lead shopfloor improvements: 5S, TPM, Lean, Kaizen, Poka-Yoke, KPI, etc.
  • Prove processes on machine independently with first-piece zero rejection.
  • Possess excellent blueprint reading and GD&T understanding.
  • Work with metrology tools (CMM/Contour/2D height/Roughness tester).
  • G-code programming on machine control; debug as needed.
  • Strong communication, math skills, and attention to detail.
  • MasterCAM, SolidWorks/Edgecam/AutoCAD is a plus; MS Office and SAP familiarity.
  • Self-starter, flexible, and customer-focused; thrive in a fast-paced environment.
  • Apply FMEA/8D/PDCA/ DMAIC/ Kaizen problem-solving approaches.

Skills

CNC programming
Machining
Leadership
Problem-solving
Lean manufacturing
Safety protocols
In-process QA
GDT reading
Metrology
G-code programming
First piece approval
Blueprint reading
Tool selection
Inventory management
MasterCAM
SolidWorks
Edgecam
AutoCAD
MS Excel
Power BI
SAP

Tools

MasterCAM
SolidWorks
Edgecam
AutoCAD
MS Excel
PowerPoint
Power BI
SAP
G-code programming
CMM/Metrology software

Job description

Role & responsibilities


  • Supervise and coordinate activities of workers engaged in machine operations, set-up, maintenance,

  • Set daily/weekly/monthly objectives and communicate them to employees.

  • Oversee quality control to ensure products meet the necessary standards and specifications.

  • Adhere to and enforce safety regulations and protocols to avoid accidents and ensure a safe work environment.

  • Collaborate with other supervisors and management team to meet company-wide production goals.

  • Resolve worker grievances or submit unsettled grievances to higher management for action.

  • Estimate, requisition, and inspect materials.

  • Collaborate with engineering and production teams to optimize processes.

  • Daily monitoring of productivity and Improving Machine utilization, OEE.

  • Develop the FTP (Fixture/Tooling/Part Programming) for the NPD and prepare the work instruction, tool list, operation sheets and shop floor’ inspection methodology.

  • Resolve technical issues and implement continuous improvement initiatives for the capacity enhancement.

  • Analyzing Job Rejection and take corrective action for non-occurrence and work for process improvements.

  • Maintain the QMS Documents for central machine Sop.

  • First Pass Yield Achievement

  • Cost saving initiatives.

  • Industry 4.o TPM-Trak application to utilize for the productivity monitoring & down time reduction.

  • Shopfloor improvements initiative like, 5S,TPM,Lean, Kaizen, Poka-Yoke, KPI, etc.Competencies required.

  • CNC programming ( Fanuc/siemens )

  • Machining

  • Equipment maintenance

  • Lean manufacturing

  • Safety protocols

  • In process Quality

  • Leadership

  • Problem-solving

  • Inventory management

  • Cutting Tools selection

  • Prove the process at machine independently and make sure the first piece of work without any rejection.

  • Excellent blueprint reading skills & through understanding of GD&T.

  • Experienced with metrology tools & processes for part inspection. CMM/Contour/2D height/Roughness tester, etc.,

  • Experienced G code programming at the machine control (debug).

  • Good communication skills, math skills and attention to detail.

  • MasterCAM &Solid works /Edgecam/ AutoCAD experience a definite plus.

  • Ms office-excel/PowerPoint/ Power-BI/SAP

  • Self-Starter / Self-Motivated / Flexible.

  • Positive customer-focused attitude.

  • Enjoys fast pace and rapidly changing environment.

  • Problem solving techniques by using FMEA/8D/PDCA/DMAIC/KAIZEN approach.

  • Ability to work independently and stick to deadline.


Hands on Experience Required


  • More than 5Yrs. exp. required in Complex valve parts machining in CNC machine, 5-Axis,4-axis,machines Turn mill, Mill-Turn ,Trevisan, DMG/Heller, TAKISAWA/MAZAK/DOOSAN and HMC/VMC and two axes in TC, VTL machines.

  • More than 5 yrs. In CNC Programming cum Setting with Tools selection (Turning & milling solution)

  • Blueprint Reading and GD&T experience required not less than 3years.

  • MasterCAM operation and part programme generation & tool designing/cycle time estimation,

  • Metrology tools & processes of part inspection preparation more than 5 years

  • New Generation Cutting tool with application.

  • Familiar in best practice TPM/Lean manufacturing/ Six sigma/VSM/5S

  • Knowledge of safety measures pertinent to each job assignment

  • Works in an office and machine shop environment.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Machine Operator (CNC / VMC Machining)
Machine Operator (CNC / VMC Machining)

Jaivel Aerospace • Ahmedabad District

On-site
INR 300,000 - 600,000
Machine Operator (CNC / VMC Machining)
Machine Operator (CNC / VMC Machining)

jaivel • Ahmedabad District

On-site
INR 400,000 - 600,000
Manager – Manufacturing Engineering and Productivity
Manager – Manufacturing Engineering and Productivity

Valveworks India • Pune District

On-site
INR 1,800,000 - 3,000,000
Senior Manufacturing Engineer
Senior Manufacturing Engineer

Succinnova Technologies Pvt Ltd • Doddaballapura

On-site
INR 600,000 - 900,000
Cnc Programmer
Cnc Programmer

Triumph Engineers & Associates • Bengaluru

On-site
INR 420,000 - 640,000
Entry Level CNC Programmer
Entry Level CNC Programmer

Flowserve India Controls Pvt Ltd • Chennai

On-site
INR 240,000 - 420,000
Supervisor - Production
Supervisor - Production

Cyient DLM • Bengaluru

On-site
INR 600,000 - 800,000
CNC Programmer
CNC Programmer

Flowserve India Controls Pvt Ltd • Chennai

On-site
INR 600,000 - 1,000,000
Assistant Manager Methods
Assistant Manager Methods

Zen Technologies Limited • Hyderabad

On-site
INR 1,200,000 - 2,200,000
Manufacturing Engineering CNC Programming (Power Mill / Fusion 360)
Manufacturing Engineering CNC Programming (Power Mill / Fusion 360)

jaivel • Ahmedabad District

On-site
INR 900,000 - 1,300,000