SMT : Stencil Cleaning / Material Feeding / Changeover Operator Chandigarh

JobItUs

Punjab

On-site

INR 240,000 - 300,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

JobItUs in Punjab is seeking a diligent SMT Stencil Cleaning and Handling Technician to join our manufacturing team. You will perform cleaning, inspection, storage, material feeding and line-changeover duties on the production line.

The role focuses on maintaining stencil cleanliness, accurate part numbers, ESD compliance, 5S practices and timely readiness for production changes.

Qualifications

  • Experience or exposure to SMT stencil cleaning and handling processes.
  • Ability to inspect stencil condition and identify defects.
  • Knowledge of line changeover procedures and material feeding workflows.

Responsibilities

  • Perform stencil cleaning per approved work instructions.
  • Inspect stencils for blockages and damage; escalate as needed.
  • Identify and store stencils with correct IDs and revisions.
  • Supply components to Pick & Place according to plan and verify part numbers.
  • Prepare feeders and reels for production changeovers; ensure correct identification.
  • Maintain material traceability and follow MES/barcode procedures when available.
  • Ensure line clearance and 5S practices before and after production.
  • Support SMED/Kaizen initiatives to reduce setup time without compromising quality.

Skills

Stencil cleaning
Stencil handling
Line changeover
Line clearance
Material feeding
Component identification
5S standards
ESD control
Kaizen/SMED

Tools

SMT equipment

Job description

Stencil Cleaning & Handling
  • Perform cleaning of SMT stencils according to approved work instructions and cleaning frequency.
  • Remove solder-paste residue from stencil apertures, surfaces and frame without damaging the stencil.
  • Use approved stencil-cleaning equipment, chemicals and consumables.
  • Ensure stencil apertures are free from blockage before release for production.
  • Handle stencils carefully during loading, unloading, movement and storage.
  • Prevent stencil damage, bending, scratches and contamination.
  • Maintain stencil cleanliness before and after production use.
Stencil Inspection & Condition Monitoring
  • Visually inspect stencil condition before and after cleaning.
  • Check for blocked apertures, physical damage, contamination, frame damage and other visible abnormalities.
  • Escalate damaged or suspect stencils to Production/Process Engineering.
  • Ensure damaged or non-approved stencils are not issued for production.
  • Maintain identification and status of cleaned, used, hold and damaged stencils.
  • Support periodic stencil-condition verification as defined by the process team.
Stencil Identification & Storage
  • Verify the correct stencil ID, product/PCB part number and revision before issue to production.
  • Store stencils at designated locations/racks after cleaning.
  • Maintain clear stencil identification and location control.
  • Ensure stencils are protected against dust and physical damage during storage.
  • Prevent mixing of stencils belonging to different products or revisions.
  • Maintain stencil issue/return records where required.
Material Feeding to Pick & Place
  • Supply electronic components to the Pick & Place machine/operator according to the production plan.
  • Verify correct component part number, material ID, package, reel/tray/tube and quantity before feeding.
  • Ensure correct material reaches the correct machine/line/product.
  • Replenish component reels in time to avoid unnecessary line stoppage.
  • Coordinate upcoming component requirements with the Pick & Place Operator.
  • Prevent material mix-up by following defined verification methods.
  • Never feed unidentified, damaged, expired or quality-blocked material.
Component Reel & Feeder Preparation
  • Prepare component reels and feeders for upcoming production/changeovers.
  • Verify feeder type and component assignment according to the approved setup sheet.
  • Support feeder loading/unloading under defined procedures.
  • Ensure feeders, reels and component packages are correctly identified.
  • Report damaged feeders, reels or component packaging.
  • Arrange upcoming feeders in sequence to enable faster line changeover.
  • Return unused feeders/components to designated locations after production.
Material Verification & Traceability
  • Ensure full component traceability during line feeding.
  • Verify part number, batch/lot, manufacturer/date-code information where required by the process.
  • Maintain reel labels and identification after partial consumption.
  • Follow barcode/MES scanning procedures where implemented.
  • Ensure material identity is retained during reel change or transfer.
  • Report any mismatch between the material and production setup immediately.
  • Prevent use of untraceable components.
Line Changeover
  • Support model/product changeovers according to the production schedule.
  • Remove previous-product materials, feeders, stencil and other setup items systematically.
  • Assist in preparation and installation of:
    • Correct stencil
    • Component reels
    • Feeders
    • Trays/tubes
    • Required consumables
    • Product-specific setup items
  • Prepare the next model in advance wherever possible.
  • Follow approved changeover checklists.
  • Support reduction of changeover time without compromising verification or quality.
Line Clearance
  • Perform proper line clearance before starting a new product/model.
  • Ensure all previous-product components, reels, PCBs, labels and consumables are removed or correctly segregated.
  • Verify workstation and machine surroundings are free from loose components from the previous production lot.
  • Prevent mixing of materials between different products, revisions or production lots.
  • Obtain/assist with required verification before new-product production begins.
Production Readiness
  • Ensure required stencil, materials, feeders and consumables are ready before planned production starts.
  • Review upcoming production sequence with the Production Supervisor/P&P Operator.
  • Pre-stage material for planned changeovers.
  • Highlight missing materials, stencils or feeders before they cause production stoppage.
  • Support first-off preparation and production start-up.
  • Maintain clear visibility of readiness for the next scheduled product.
Changeover Time Reduction
  • Support SMED (Single-Minute Exchange of Die) and changeover-time reduction activities.
  • Track changeover-related delays where required.
  • Pre-kit and pre-stage components, feeders and stencils before machine stoppage.
  • Separate external preparation activities from machine-stopped activities where possible.
  • Participate in Kaizen activities aimed at reducing setup losses.
  • Ensure improvements do not bypass required material verification or line-clearance controls.
ESD Control
  • Follow defined Electrostatic Discharge (ESD) requirements when handling electronic components.
  • Use ESD-safe bins, trolleys, trays and workstations.
  • Use required ESD wrist straps, footwear and garments.
  • Ensure components are not placed on uncontrolled/non-ESD surfaces.
  • Report damaged or missing ESD-control equipment.
  • Follow plant-defined ESD checks before working with sensitive electronic material.
MSD Control
  • Follow approved handling requirements for Moisture Sensitive Devices (MSD).
  • Minimize unnecessary exposure of moisture-sensitive components.
  • Maintain appropriate identification of opened reels/packages.
  • Return unused MSD material to designated controlled storage/dry cabinet as required. li>Coordinate with Stores/Production regarding floor-life status.
  • Escalate material that exceeds defined exposure conditions rather than feeding material directly to production.
Solder Paste & Printing Support
  • Support preparation of required stencil and approved consumables for the printer.
  • Ensure stencil is available and clean before printer setup.
  • Support safe removal and transfer of used stencils for cleaning.
  • Avoid contamination or damage during stencil movement.
  • Support the Printer Operator during model changeover according to defined responsibilities.
  • Ensure previous model's stencil and related setup items are cleared before the next setup.
Material Return & Reconciliation
  • Return unused component reels/trays/tubes after production according to defined procedure.
  • Ensure returned material has proper identification and quantity/status information.
  • Maintain traceability of partial reels. li>Ensure MSD materials are returned to the required storage condition.
  • Coordinate material reconciliation with Stores/Production.
  • Prevent loose/unidentified components from being returned to usable stock without authorization.
Abnormality Reporting

Immediately escape conditions such as:

  • Wrong material or part number
  • Material without identification
  • Damaged component reels/trays
  • Suspected material mix-up
  • Damaged or blocked stencil
  • Missing feeder or setup material
  • ESD/MSD non-compliance
  • Line-clearance discrepancy
  • Shortage likely to result in production stoppage

Do not continue feeding or setup activity until critical discrepancies are resolved.

5S & Workplace Organization
  • Maintain strong 5S standards in stencil-cleaning, material-preparation and changeover areas.
  • Keep feeders, stencils, reels, tools and consumables at defined locations.
  • Maintain clear identification of cleaned/used/damaged stencils.
  • Remove unnecessary materials after every product changeover.
  • Ensure material-preparation trolleys and racks remain organized.
  • Maintain a clean working environment around SMT lines.
Safety & Chemical Handling
  • Follow approved safety instructions for stencil-cleaning equipment.
  • Use required PPE while handling cleaning agents/chemicals.
  • Follow designated controls for storage and disposal of cleaning chemicals and contaminated cleaning materials.
  • Do not use unapproved chemicals for stencil cleaning.
  • Report leaks, damaged containers and unsafe conditions.
  • Follow machine safety requirements when working close to SMT equipment.
Documentation & Records

Maintain required records including:

  • Stencil cleaning
  • Stencil issue/return
  • Material feeding
  • Component/reel traceability
  • Changeover checklist
  • Line-clearance confirmation
  • Material return
  • Daily operator checks

Ensure all entries are accurate and completed at the required time.

Shift Handover
  • Provide proper handover regarding current product and next planned model.
  • Communicate pending feeder/material preparation.
  • Highlight material shortages or suspected issues.
  • Inform the next shift about stencil cleaning/availability status.
  • Communicate any unresolved line-clearance or changeover issues.
  • Ensure materials and setup items are correctly identified before shift completion.
Continuous Improvement & Multi-Skilling
  • Participate in Kaizen, SMED, TPM and 5S improvement activities.
  • Suggest improvements for material feeding and line-changeover efficiency.
  • Support reduction of material-change and setup-related stoppages.
  • Develop skills in stencil cleaning, feeder preparation, material handling and line changeover.
  • Support cross-training to provide flexible manpower during production peaks.
Key Skills / Competencies
  • SMT stencil cleaning and handling
  • SMT component identification
  • Pick & Place material feeding
  • Component reel/tray/tube handling
  • Feeder preparation
  • Product/model changeover
  • Line clearance
  • FIFO/material traceability awareness
  • ESD/MSD control
  • Basic SMT process understanding
  • Material kitting
  • SMED/changeover improvement
  • 5S and visual management
  • Basic production documentation
  • Safe chemical handling
  • Strong attention to material mix-up prevention
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Store Incharge-SMT(Derabassi)
Store Incharge-SMT(Derabassi)

JobItUs • Punjab

On-site
INR 350,000 - 550,000
Process Engineering
Process Engineering

Tata Electronics • Mayang

On-site
INR 900,000 - 1,500,000
SMT : ICT (In-Circuit Testing) Operator (Chandigarh)
SMT : ICT (In-Circuit Testing) Operator (Chandigarh)

JobItUs • Punjab

On-site
INR 350,000 - 550,000
Health insurance
SMT Technician/Operator
SMT Technician/Operator

Cavalier Wireless • Coimbatore District

On-site
INR 180,000 - 320,000
Group Leader – SMT
Group Leader – SMT

3D Glass Solutions, Inc- • Khordha

On-site
INR 2,600,000 - 4,500,000
Production Manager
Production Manager

Electrohms • Bengaluru

On-site
INR 3,000,000 - 6,000,000
Shift Executive
Shift Executive

Nobel Hygiene Pvt. Ltd. • Nashik District

On-site
INR 600,000 - 800,000
Senior Engineering Manager(SMT & Backend Equipment)
Senior Engineering Manager(SMT & Backend Equipment)

The Practice Centre • Tirupati

On-site
INR 3,500,000 - 6,000,000
Shift Engineer/ In-charge - SMT Production
Shift Engineer/ In-charge - SMT Production

Kaynes Technology • Chamarajanagar

On-site
INR 600,000 - 900,000
Equipment Technician
Equipment Technician

Tata Electronics (TEPL) • Assam

On-site
INR 350,000 - 750,000