SMT Equipment Engineer

Tata Electronics

Assam

On-site

INR 350,000 - 550,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Tata Electronics is seeking a maintenance engineer responsible for preventive maintenance and continuous improvement across soldering and reflow equipment. You will lead PM activities, ensure MTBA/OEE targets, and coordinate with process and NPI teams for setup and conversions.

The role requires hands-on skills with solder ball mounters, inspection equipment, and reflow ovens, plus documenting actions and training downline staff to reduce downtime.

Qualifications

  • Degree in Electrical/Electronics/Mechanical/Mechatronics.
  • Experience with preventive maintenance and equipment troubleshooting.

Responsibilities

  • Support preventive maintenance for listed equipment and update PM docs.
  • Install, upgrade and modify Solder Ball Mounter, Solder Ball Inspection, Reflow and related processes.
  • Drive PM activity to meet MTBA/OEE/MTBF/MTTR targets.
  • Monitor PM success rate and maintain 60 min MTBA for 3 lots.
  • Update maintenance checklists based on lessons learned.
  • Hands-on with listed equipment to reduce downtime effectively.
  • Perform root-cause analysis and implement corrective/preventive actions.
  • Issue spare parts and manage stock levels; trigger purchases as needed.
  • Perform wiring management and maintain 5S in the area.
  • Communicate passovers and participate in vendor training to upskill.
  • Act as shift representative for the equipment and process.
  • Write detailed technical reports including 8D and root cause analysis.

Skills

Preventive Maintenance
PM Documentation
Downtime Reduction
Root Cause Analysis
Corrective Actions
Preventive Actions
5S Practices
Technical Reporting
Mentor & Training

Education

Degree in Electrical / Electronics / Mechanical / Mechatronics

Tools

Solder Ball Mounter
Solder Ball Inspection
Reflow Oven
Strip Mounter
Heller Reflow Oven

Job description

Job Description:

Responsibility:

1.Support equipment Preventive Maintenance, major Down, update pm documentation, assist Process and Support NPI to set-up & conversion for Solder Ball Mounter, Solder Ball Inspection, Reflow, De flux, Strip Mounter, Heller Reflow Oven & process, Pick & Place, Trim & Form.

2. Perform installation, upgrade, continue improvement & modification on Solder Ball Mounter, Solder Ball Inspection, Reflow, De flux, Strip Mounter, Heller Reflow Oven & process.

3. Involve in PM activity and ensure completion within the allocated time to meet the targeted MTBA, OEE, MTBF and MTTR.

4. Achieve the PM Success rate target goal (3 lots) monitoring with 60 min MTBA.

5. Responsible to update the Preventive maintenance checklist base on lesson learn on the major down.

6. Good Hands-on skill in the mentioned equipment and must be responsible to reduce downtime effectively.

7. Perform analysis and process mapping for line quality issue by implementing Problem Statement, Root Cause, Containment actions, permanent Corrective action , Preventive action and feedback to superiors for further actions and update shift report to respective Team.

8. Issuing spare parts for stock items, keep track qty for non-stock items/critical parts and trigger superior to purchase if reach triggering limit.

9. Perform equipment wiring management and maintain process area/machine 5S in mentioned area.

10. Proper Passover PM shift communication, information sharing & follow up.

11. Go through internal and external mentor program/vendor training to upgrade technical skill

12. Ensure spec compliance and follow OCAP for machine troubleshooting which handover by sustain team due to Major Down and to perform equipment related calibration

13. Act as ERT shift representative for mention equipment and process

14. Any other duties assigned from time to time

15. Must be able to Handle a Group of Maintenance.

16. Must be able to write Detail Technical Report on any Equipment failure and product failure related to equipment consisting of 8D and Root cause Problem Solving consist of Problem Statement, Root Cause, Containment Action, Permanent Corrective action and Permanent Preventive action.

17. Coaching, guiding and arranging soft skills and Equipment Training L1/ L2/L3 /L4 and L5 for the downline.

Qualifications & Experience:

Degree in Electrical Electronic / Mechanical / Mechatronics

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

SMT Equipment Engineer
SMT Equipment Engineer

Tata Electronics Pvt. Ltd. • Assam

Remote
INR 600,000 - 850,000
SMT Equipment Engineer
SMT Equipment Engineer

Tata Electronics • Mayang

On-site
INR 279,000 - 391,000
Equipment Engineer
Equipment Engineer

Tata Electronics Limited • Assam

On-site
INR 500,000 - 800,000
SMT Equipment Maintenance Engineer
SMT Equipment Maintenance Engineer

Cyient Limited • Hyderabad

On-site
INR 600,000 - 900,000
Sr Maintenance Engineer SMT
Sr Maintenance Engineer SMT

Varroc • Pune District

On-site
INR 350,000 - 550,000
SMT Equipment Maintenance Engineer
SMT Equipment Maintenance Engineer

Cyient DLM • Hyderabad

On-site
INR 600,000 - 1,000,000
Equipment Technician
Equipment Technician

Tata Electronics • Mayang

On-site
INR 350,000 - 520,000
SMT Equipment Engineer
SMT Equipment Engineer

Tata Electronics Pvt. Ltd. • Kolar

On-site
INR 550,000 - 850,000
Smt Maintenance Engineer
Smt Maintenance Engineer

Uno Minda Limited • Bengaluru

On-site
INR 600,000 - 850,000
Smt Maintenance Engineer
Smt Maintenance Engineer

Uno Minda Limited • Neemrana

On-site
INR 450,000 - 630,000