SMT Equipment Engineer

Tata Electronics Pvt. Ltd.

Assam

Remote

INR 600,000 - 850,000

Full time

6 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Tata Electronics Pvt. Ltd. in Assam invites applications for a Maintenance Engineer in the Assembly Technology Development department. The role focuses on preventive maintenance, equipment upgrades, and process improvements across solder ball equipment and related lines.

Responsibilities include PM execution, MTBA/OEE/MTBF targets, root cause analysis and 8D problem solving, mentoring L1-L5 trainees, and coordinating with sustain teams on calibration and OCAP procedures.

Qualifications

  • Must have degree in Electrical/Electronic, Mechanical or Mechatronics.
  • Experience with preventive maintenance programs and failure analysis.
  • Capable of documentation, 8D problem solving and corrective actions.

Responsibilities

  • Support preventive maintenance for listed equipment and update PM docs.
  • Install, upgrade and modify equipment for process and line setup.
  • Meet MTBA, OEE, MTBF and MTTR targets through PM activities.
  • Monitor PM success rate and ensure timely passdown communication.
  • Update PM checklists based on lessons learned from major downs.
  • Demonstrate hands-on skills to minimize downtime and map root causes.
  • Conduct root cause analysis, containment, and permanent corrective actions.
  • Issue spare parts and track non-stock/critical items.
  • Manage wiring and 5S in the process area; ensure clean documentation.
  • Lead shift handovers and mentor teams through training (L1-L5).
  • Participate in vendor training and internal mentors to upgrade skills.
  • Coordinate equipment calibration and OCAP-based troubleshooting with sustain team.
  • Act as ERT shift representative for equipment and processes.
  • Perform any other duties assigned and supervise maintenance groups.

Skills

Preventive Maintenance
Downtime reduction
Root Cause Analysis

Education

Bachelor's degree in Electrical/Mechanical/Mechatronics

Tools

Solder Ball Mounter
Solder Ball Inspection
Reflow Oven
De-flux equipment
Strip Mounter
P&P machine
5S in area

Job description

Department: Assembly Technology Development

Business: TSAT India

Responsibility:
  • 1.Support equipment Preventive Maintenance, major Down, update pm documentation, assist Process and Support NPI to set-up & conversion for Solder Ball Mounter, Solder Ball Inspection, Reflow, De flux, Strip Mounter, Heller Reflow Oven & process, Pick & Place, Trim & Form.
  • 2. Perform installation, upgrade, continue improvement & modification on Solder Ball Mounter, Solder Ball Inspection, Reflow, De flux, Strip Mounter, Heller Reflow Oven & process.
  • 3. Involve in PM activity and ensure completion within the allocated time to meet the targeted MTBA, OEE, MTBF and MTTR.
  • 4. Achieve the PM Success rate target goal (3 lots) monitoring with 60 min MTBA.
  • 5. Responsible to update the Preventive maintenance checklist base on lesson learn on the major down.
  • 6. Good Hands-on skill in the mentioned equipment and must be responsible to reduce downtime effectively.
  • 7. Perform analysis and process mapping for line quality issue by implementing Problem Statement, Root Cause, Containment actions, permanent Corrective action , Preventive action and feedback to superiors for further actions and update shift report to respective Team.
  • 8. Issuing spare parts for stock items, keep track qty for non-stock items/critical parts and trigger superior to purchase if reach triggering limit.
  • 9. Perform equipment wiring management and maintain process area/machine 5S in mentioned area.
  • 10. Proper Passover PM shift communication, information sharing & follow up.
  • 11. Go through internal and external mentor program/vendor training to upgrade technical skill
  • 12. Ensure spec compliance and follow OCAP for machine troubleshooting which handover by sustain team due to Major Down and to perform equipment related calibration
  • 13. Act as ERT shift representative for mention equipment and process
  • 14. Any other duties assigned from time to time
  • 15. Must be able to Handle a Group of Maintenance.
  • 16. Must be able to write Detail Technical Report on any Equipment failure and product failure related to equipment consisting of 8D and Root cause Problem Solving consist of Problem Statement, Root Cause, Containment Action, Permanent Corrective action and Permanent Preventive action.
  • 17. Coaching, guiding and arranging soft skills and Equipment Training L1/ L2/L3 /L4 and L5 for the downline.
Qualifications & Experience:

Degree in Electrical Electronic / Mechanical / Mechatronics

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

SMT Equipment Engineer
SMT Equipment Engineer

Tata Electronics • Assam

On-site
INR 350,000 - 550,000
Equipment Engineer
Equipment Engineer

Tata Electronics Limited • Assam

On-site
INR 500,000 - 800,000
SMT Equipment Engineer
SMT Equipment Engineer

Tata Electronics • Mayang

On-site
INR 279,000 - 391,000
SMT Equipment Maintenance Engineer
SMT Equipment Maintenance Engineer

Cyient Limited • Hyderabad

On-site
INR 600,000 - 900,000
SMT Equipment Maintenance Engineer
SMT Equipment Maintenance Engineer

Cyient DLM • Hyderabad

On-site
INR 600,000 - 1,000,000
Equipment Technician
Equipment Technician

Tata Electronics • Mayang

On-site
INR 350,000 - 520,000
Sr Maintenance Engineer SMT
Sr Maintenance Engineer SMT

Varroc • Pune District

On-site
INR 350,000 - 550,000
SMT Technician
SMT Technician

Tata Electronics Pvt. Ltd. • Assam

Remote
INR 240,000 - 420,000
SMT Equipment Engineer
SMT Equipment Engineer

Tata Electronics Pvt. Ltd. • Kolar

On-site
INR 550,000 - 850,000
Smt Maintenance Engineer
Smt Maintenance Engineer

Uno Minda Limited • Bengaluru

On-site
INR 600,000 - 850,000