Flight Controller, GNSS and Embedded Systems
Location: Gurgaon, India (On-site)
Experience: 2 to 4 years (we weight a strong portfolio of self-built hardware over years of tenure)
Team: Hardware / Avionics, BharatRohan
Role Overview
BharatRohan designs and manufactures UAVs and flight-critical avionics in India - flight controllers, GNSS receivers, carrier boards, and power electronics - built to open Pixhawk / Cube standards and running ArduPilot / PX4-based flight stacks. Our platforms serve agriculture, defence, survey, and inspection missions, and our avionics are designed for our own fleet as well as for partner OEMs.
We are looking for an engineer who does not just integrate off-the-shelf modules, but who designs, builds, and brings up avionics hardware from scratch. If you have personally taken a board from schematic to flying hardware, this role is for you. This is a core hardware role with genuine end-to-end ownership: schematic to PCB to bring-up to firmware to field.
Key Responsibilities
Hardware and PCB Design
- Design multi-layer PCBs and schematics in Altium Designer (or KiCad) - working from IC datasheets and reference designs, not just wiring up ready-made modules
- Design custom carrier boards to the open Pixhawk / Cube (FMUv6) standard - connectors, power, and peripheral breakouts
- Design to the Pixhawk open standards (DS-009 connectors, DS-010 Autopilot Bus, FMUv6X / v6C) and Cube-compatible carrier pinouts
- Design custom GNSS-and-compass boards integrating u-blox receivers (NEO-M9N, ZED-F9P), including the RF front-end (antenna matching, SAW filter, LNA, controlled-impedance routing)
- Design flight-critical power hardware - power distribution boards, BECs, voltage / current monitoring, and redundant power paths (ideal-diode ORing, brown-out protection)
- Design the flight controller to ESC interface (PWM, DShot with telemetry, CAN ESCs) in coordination with the power electronics team
- Implement IMU redundancy, vibration isolation, and IMU temperature control (heater circuits) for stable sensor performance
- Own signal integrity, EMI / EMC, and ESD - especially GNSS coexistence alongside LTE modems and camera subsystems
- Design for harsh environments - vibration, heat, dust, moisture, and agrochemical spray exposure (conformal coating, locking connectors, sealing) - targeting a service life of 1000+ flight hours
- Prepare BOM and AVL, manage component sourcing and lifecycle, and drive design-for-manufacturing with PCB fab and assembly partners
- Prioritise indigenous and trusted-origin component sourcing, with qualified alternates for long-lifecycle and defence programmes
Firmware and Board Bring-up
- Develop firmware in Embedded C and C++ on STM32 (ARM Cortex-M) using ChibiOS, NuttX, or FreeRTOS
- Port ArduPilot and/or PX4 to our boards (hwdef, bootloader, sensor drivers) and validate the full system
- Develop DroneCAN / UAVCAN peripheral nodes (GPS, compass, ESC, smart battery) and MAVLink integration
- Bring up new boards: validate power rails, debug buses with an oscilloscope, logic analyzer, and SWD / JTAG, and write drivers for IMU, barometer, magnetometer, and GNSS over I2C, SPI, UART, and CAN
- Implement secure boot and signed firmware for OTA updates
- Work closely with the flight software team on autopilot and sensor integration
Validation
- Benchmark autopilot and GNSS hardware against our designs - review schematics, ICs, BOMs, and layouts for interoperability with open standards
- Perform fine-pitch rework (hot-air, BGA, microscope) for prototyping and debugging
- Define and run bring-up, functional, and environmental (vibration and temperature) test procedures, and design test jigs and fixtures
- Run EMC / ESD pre-compliance testing (IEC 61000-4-2, CISPR) and support DGCA type certification and defence qualification (awareness of MIL-STD-461 / 810, DO-160)
- Define production test procedures and end-of-line test fixtures for volume manufacturing
Ownership
- Take end-to-end ownership of deployed field hardware - reliability, performance, and OTA-supportable firmware
- Document your designs (schematics, interface control documents, bring-up notes) and collaborate with firmware, backend, mobile, and product teams
- Produce customer-facing documentation - datasheets, pinouts, and integration guides - for hardware supplied to partner OEMs
- Maintain hardware version control, design reviews, and change records for certification traceability
Required Skills (Must-have)
- Multi-layer PCB design and schematic capture in Altium Designer or KiCad
- Hardware design around STM32 / ARM Cortex-M from datasheets - power, clocking, decoupling, and layout
- Embedded C and C++ on both bare-metal and an RTOS
- Board bring-up and debugging with an oscilloscope, logic analyzer, and SWD / JTAG
- Solid working knowledge of I2C, SPI, UART, and CAN
- Power electronics fundamentals - DC-DC converters, current sensing, protection circuits, and thermal design
- A demonstrable portfolio of boards you personally designed and brought up - GitHub, project links, photos, or shipped products
- B.Tech in Electronics and Communication or Electrical Engineering, or an equivalent practical track record
Strongly Preferred
- ArduPilot or PX4 board porting (hwdef) - ideally a board you have already ported
- Redundant and efficient power-supply design
- RF and GNSS layout, and u-blox chip integration
- Reverse-engineering a PCB, or extracting and analyzing firmware
- Design-for-manufacturing experience and working with fab / EMS houses
- EMC / EMI pre-compliance and certification testing experience
- Designing for vibration and harsh environments (UAV, automotive, or industrial)
Bonus
- RTK GNSS (ZED-F9P) and moving-baseline heading
- RF lab work (vector network analyzer, spectrum analyzer, near-field probes)
- MAVLink internals and Mission Planner / QGroundControl
- ESC / motor-drive hardware (gate drivers, MOSFET selection, FOC)
- Secure boot, firmware signing, and hardware security on STM32
- Awareness of open-source licensing (GPL vs BSD) as it applies to shipped products
- Experience with defence or aerospace hardware standards and documentation
What Makes You a Great Fit
- You have taken hardware from a blank schematic to a working board yourself
- You debug with a scope in one hand and a datasheet in the other
- You own problems end-to-end and document what you build
- You design for production and reliability, not just for the first prototype
- You are excited to build India-made avionics for real-world agriculture
Why Join Us
- Build flight-critical hardware that flies over real farms, not demos
- Own avionics designs from concept to production
- Work across the full stack - PCB, RF, firmware, autopilot, and field
- Hardware that ships across agriculture, defence, survey, and inspection - and to partner OEMs