Assembly, Integration & Testing (AIT) Intern

Dover

Paris, Brétigny-sur-Orge

A distancia

EUR 12.000 - 18.000

Jornada completa

Hace 4 días
Sé de los primeros/as/es en solicitar esta vacante

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Ventajas ofrecidas por este puesto de trabajo

Mentorship
Future equity
Public transport pass
Bike provided
Free lunch
Team offsites

Descripción de la vacante

HyLight is seeking an Assembly, Integration & Testing (AIT) Intern to join the Production team. You will assemble, wire, and validate mechanical, electrical, and avionics subassemblies for HyLighters, taking them from components to flight-ready units at Base 217.

You will work closely with R&D and production engineering in a fast-paced setting. Reporting to the Head of Production, this 4–6 month internship offers real responsibility, mentorship, and the potential for future equity.

Formación

  • Hands-on aptitude with workshop tools, crimping, wire stripping, and soldering.
  • Able to read mechanical 2D/3D CAD models (SolidWorks, CATIA, Fusion 360) and electrical schematics.
  • Experience with basic lab test tools (multimeters, bench power supplies, oscilloscopes).
  • Familiarity with 3D printing (FDM/SLA) and rapid prototyping techniques.

Responsabilidades

  • Assemble, wire, integrate, and validate mechanical, electrical, and avionics subassemblies.
  • Perform baseline electrical verification and continuity checks.
  • Validate CAN, UART, I2C, SPI, Ethernet buses across hardware nodes.
  • Support FAT and flightline testing; assist flight operations.
  • Troubleshoot issues on the shop floor and provide feedback for DFMA.

Conocimientos

Workshop tools
Soldering
CAD reading
Electrical tests
3D printing
French/English

Educación

Mechatronics / Mechanical / Electrical / Aerospace engineering (License / BTS / BUT)

Herramientas

SolidWorks
CATIA
Fusion 360
Oscilloscopes
Multimeters
3D printers

Descripción del empleo

About HyLight

Power lines, gas pipelines and railways are still inspected the way they were 50 years ago: by helicopter. Expensive, noisy, and up to a tonne of CO₂ per flight hour.

We built the alternative. The HyLighter is a 12-metre autonomous airship running on hydrogen. It flies for up to 10 hours, almost silently, and spots a 1 mm defect from 25 metres up.

But the airship is only half the story. Every flight brings back massive amounts of LiDAR, imagery and methane data, and that’s where the value is. Our AI turns it into what operators act on: 50+ types of defects detected automatically, and leaks pinpointed across their network.

It’s not a prototype. HyLighters already fly missions for France’s largest energy and rail operators and have flown over the Palace of Versailles. Backed by Y Combinator, we just raised €13M to go from 4 airships to 15.

Working at HyLight

We design, build and fly every HyLighter, and turn its data into insight, all under one roof on a former airbase. Which means:

  • You own it all the way. At a big aerospace company, you’d own a small piece of one subsystem. Here, you design it, test it, stand on the airfield when it flies, and see the client act on the data it brings back.
  • Weeks, not years. Ideas go from whiteboard to flight test in weeks.
  • Responsibility from day one. The founders’ average age is 27. Nobody here waits for permission.
Job Summary

As we ramp up production to build our next batch of HyLighters, the Assembly, Integration & Testing (AIT) Intern is the critical link between design engineering and real‑world flight hardware.

Reporting directly to the Head of Production and collaborating closely with our mechanical and embedded systems engineers, you will work hands‑on in the HyLight Base. Your core mission is to assemble, wire, integrate, and validate the mechanical, electrical, and avionics subassemblies of our airships, taking them from bare structural components to fully integrated, flight‑ready ariship.

Duration: 4–6 months

Key Deliverables & Responsibilities
  • Mechanical & Structural Assembly:
    • Assemble primary structures, gondolas, envelope attachment points using hand tools, torque wrenches, and assembly jigs in accordance with technical drawings.
    • Integrate mechanical hardware, enclosures, and payload mountings, ensuring clean fit, finish, and structural integrity.
  • Wiring, Soldering & Harness Integration:
    • Build, route, and secure custom wiring harnesses, power distribution lines, and signal cables across the airship frame.
    • Perform precision soldering, connector pinning/crimping, and board‑level component integration based on electrical schematics.
  • Avionics & Subsystem Integration:
    • Integrate flight computers, telemetry systems, communication radios, motor controllers, and sensor payloads into airframe bays.
    • Rapidly prototype custom mounting brackets, cable guides, and mechanical interfaces using 3D printers and workshop tools.
  • Bench Testing & Electrical Checkouts:
    • Perform baseline electrical verification: continuity checks, insulation resistance tests, and voltage rail measurements before first power‑on.
    • Validate digital communication buses (CAN, UART, I2C, SPI, Ethernet) across connected hardware nodes.
  • Factory Acceptance Testing (FAT) & Flightline Support:
    • Execute end‑of‑line functional acceptance tests (FAT) to qualify newly integrated airships before handover to Flight Operations.
    • Support the operations and flight test crew during airfield ground runs and flight checks at Base 217.
  • Troubleshooting:
    • Diagnose and resolve mechanical interferences, electrical faults, and assembly bottlenecks on the spot.
    • Provide direct feedback to the R&D and design teams to drive Design for Manufacturing & Assembly improvements.
Ideal Profile & Qualifications

Academic Background: Currently enrolled in a License, BTS, or BUT degree program in Mechatronics, Mechanical, Electrical, or Aerospace Engineering.

  • Practical & Technical Skills:
    • Proven hands‑on aptitude: skilled with workshop hand tools, crimping, wire stripping, and electronic soldering.
    • Ability to read and interpret mechanical 2D/3D CAD models (SolidWorks, CATIA, Fusion 360) and electrical schematics.
    • Experience with basic lab test tools (multimeters, bench power supplies, oscilloscopes).
    • Familiarity with 3D printing (FDM/SLA) and rapid prototyping techniques.
  • Maker Spirit & Mindset (Big Plus):
    • Passion for building: experience building/flying FPV drones, RC planes, robotics club projects, or personal hardware/electronics DIY builds.
    • Languages: Professional French and working English (both written and spoken).
What We Offer:
  • Real responsibility and mentorship.
  • Potential to become a shareholder in HyLight upon hiring.
  • 100% reimbursement of public transport pass (Navigo) or €800/year for sustainable commuting.
  • Bike provided for commuting.
  • Free lunch.
  • Bi‑annual offsite trips with the whole team.
Location

Base 217, Brétigny-sur-Orge, accessible via RER C

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Mechanical Integration and Test Engineer
Mechanical Integration and Test Engineer

HyLight • Paris

Presencial
EUR 52.000 - 68.000
Public transport reimbursement
Bike provided
Free lunch
+3
Embedded Software Engineer, Airships to Cloud
Embedded Software Engineer, Airships to Cloud

HyLight • Paris

Híbrido
EUR 60.000 - 90.000
Shareholder opportunity
Direct impact from day one
Bi-annual offsite trips
+2
Embedded Software Engineer, Airships to Cloud
Embedded Software Engineer, Airships to Cloud

HyLight • Friauville

Híbrido
EUR 65.000 - 90.000
Shareholder potential
International team
Offsite trips
+3
Software / Cloud / Data Engineer, Client Insights Platform
Software / Cloud / Data Engineer, Client Insights Platform

HyLight • Friauville

Híbrido
EUR 70.000 - 120.000
Potential shareholding in HyLight
Real ownership and direct impact from:
Excellent work environment with an on‑
+1
Technicien(ne) Assemblage et Fabrication (H/F)
Technicien(ne) Assemblage et Fabrication (H/F)

present of AI • Paris

Híbrido
EUR 23.000 - 32.000
Country Lead - Germany
Country Lead - Germany

HyLight • Paris

Presencial
EUR 90.000 - 150.000
Competitive compensation
Performance-based bonus
Ownership and leadership opportunity
+7
Assembly, Integration & Testing (AIT) Intern
Assembly, Integration & Testing (AIT) Intern

present of AI • Paris

Presencial
EUR 25.000 - 35.000
Senior Electronics Engineer
Senior Electronics Engineer

present of AI • Paris

Híbrido
EUR 60.000 - 90.000
Supply Chain & Production Planning Intern
Supply Chain & Production Planning Intern

present of AI • Paris

Presencial
EUR 16.000 - 20.000
Mechanical Engineering Internship
Mechanical Engineering Internship

present of AI • Paris

Híbrido
EUR 13.000 - 20.000