Solutions Engineer

Auterion; München; Vor Ort; EUR 70.000 - 110.000; Vollzeit

Zusammenfassung

Auterion is seeking a Solutions Engineer UAS / Aviation to drive integration, validation, and operational readiness of Auterion-powered drone systems. You will collaborate with production, hardware, firmware/software, and operations to ensure platform transitions from airframe to validated flying robots ready for deployment.

This role focuses on hands-on flight testing, sensor calibration, firmware flashing, and End-of-Line validation within a fast-paced drone technology environment.

Qualifikationen

• BSc in engineering/aviation tech or related field.
• Hands-on with autopilot, mission planning, firmware flashing, configuration and flight validation.
• Strong embedded systems, firmware debugging and HW-SW integration skills.
• Proficiency in C/C++ and MAVLink or similar protocols.
• Experience with UAV sensor calibration, ESC tuning and flight controller configuration.
• Good Linux-based development/debugging experience.
• Experience with UAV flight testing, validation and troubleshooting in real-world ops.
• Understanding of drone manufacturing, QC and End-of-Line testing is a plus.
• Strong collaboration and communication with cross-functional teams.
• Ability to work independently in fast-paced environments.
• EU citizenship required.

Aufgaben

• Operate in a hands-on environment with evolving system requirements and rapid hardware/software integration.
• Perform firmware flashing and configuration using PX4 or other autopilot ecosystems; calibrate sensors and tune ESCs.
• Execute End-of-Line software validation and functional testing for production readiness.
• Conduct payload and camera load-seat testing to validate integration stability and flight performance.
• Troubleshoot embedded system issues across firmware, interfaces, sensors, and HW/SW interactions.
• Work independently and with engineering/manufacturing to diagnose flight-readiness issues.
• Contribute to validation workflows for complete UAV systems and configurations.
• Support full-stack drone integration across hardware, firmware and flight software.
• Address complex integration and reliability challenges in sensors, flight controllers, and power systems.
• Drive improvements in validation/testing to boost product quality and deployment readiness.
• Collaborate across hardware, firmware, operations and QC to accelerate batch validation and reduce EoL cycle times.
• Interface with vendors to support testing infrastructure and hardware integration.
• Participate in hands-on flight testing to validate platform stability, safety and mission performance.

Kenntnisse

Autopilot systems

Mission planning

Firmware flashing

Flight validation

C/C++

Linux debugging

Sensor calibration

Hardware-software integration

Ausbildung

B.Sc. in Aviation Technology, Robotics, Embedded Systems, Electrical Engineering, or related field

Tools

PX4

MAVLink

Jobbeschreibung

We’re looking for a Solutions Engineer UAS / Aviation who will play a pivotal role in the future of our company. Our Solutions Engineer will be responsible for the integration, validation, and operational readiness of Auterion-powered drone systems. You’ll collaborate closely with the production team, as well hardware engineering, firmware/software teams, and operations while ensuring that every platform transitions successfully from a physical airframe into a fully validated flying robot ready for deployment. This role is ideal for someone who lives and breathes drone technology and enjoys bridging the gap between hardware, firmware, and real-world flight performance.

Responsibilities and Duties

• Operate in a highly hands-on environment with evolving system requirements, rapidly iterating across hardware and software integration challenges
• Perform firmware flashing and configuration using PX4 and/or other autopilot ecosystems, including sensor calibration, ESC tuning, and system bring-up
• Execute End-of-Line (EoL) software validation and functional testing to ensure production readiness and reliability
• Conduct payload and camera load-seat testing, validating integration stability and operational performance under real-world conditions
• Troubleshoot embedded system issues spanning firmware, communication interfaces, sensors, and hardware-software interactions
• Work independently to diagnose integration and flight-readiness issues while collaborating closely with engineering and manufacturing teams
• Contribute to validation workflows for complete UAV systems, including components, integrated features, and operational flight configurations
• Support full-stack drone integration activities across hardware, embedded firmware, and flight software layers
• Solve complex integration and reliability challenges involving sensors, flight controllers, communication protocols, and power systems
• Drive measurable impact on product quality, manufacturing throughput, and deployment readiness through improved validation and testing processes
• Partner cross-functionally with hardware engineering, firmware/software teams, operations, and QC engineering to accelerate batch validation and reduce EoL cycle times
• Interface with external vendors and equipment providers to support testing infrastructure, hardware integration, and operational readiness
• Participate in hands-on flight testing activities to validate platform stability, safety, and mission performance

Qualifications and Skills

• B.Sc. in Aviation Technology, Robotics, Embedded Systems, Electrical Engineering, or related field (M.Sc. optional)
• Hands-on experience working with Autopilot, Mission planning and navigation Software, including firmware flashing, configuration, and flight validation
• Strong technical foundation in embedded systems, firmware debugging, and hardware-software integration
• Proficiency in C/C++ and/or MAVLink communication protocols or equivalent Datalink protocols
• Experience with UAV sensor calibration, ESC tuning, and flight controller configuration
• Familiarity with Linux-based development and debugging environments
• Experience with UAV flight testing, system validation, and troubleshooting in real-world operational environments
• Understanding of drone manufacturing, QC processes, and End-of-Line testing methodologies is a plus
• Strong collaboration and communication skills when working with cross-functional engineering and operations teams
• Ability to work independently in fast-paced environments with evolving technical challenges
• Passion for drone technology and a hands‑on engineering mindset focused on building reliable flying systems
• EU citizenship required

About Auterion

We are building the leading software platform for AI-powered autonomous systems for enterprise and government customers. Our team is supporting the most important missions and solving the most challenging problems.

At Auterion, we bring together the sharpest minds who love to solve the hardest problems. Join a vibrant team built on innovation, openness, and excellence, where you’ll be empowered to develop ideas, collaborate across all levels, and make an impact that matters.