Welder - Second Shift

Lockheed Martin; Archbald (Lackawanna County); Presencial; USD 60.000 - 75.000; Jornada completa

Ventajas ofrecidas por este puesto de trabajo

Medical insurance

Dental coverage

Vision coverage

Flexible work schedules

401(k) match

Paid time off

Holidays

Parental Leave

EAP

Education assistance

Life Insurance

Disability insurance

Descripción de la vacante

Lockheed Martin in Archbald, PA is seeking a Welder to perform layout, fit up and welding on aluminum and steel parts, with responsibility for completing weld-outs, finishing and QC in a fast-paced shop.

You will operate collaborative welding robots, verify TCP calibration, read CAD data, set up equipment, and follow safety rules while supporting cross-training and process improvements.

Formación

• Ability to qualify and retain weld qualifications per procedure
• Experience with aluminum and steel weldments per specs
• Able to read blueprints and welding symbols
• Capable of handling chemicals safely

Responsabilidades

• Layout, fit up and all welding and related fabrication processes on low complexity aluminum and/or steel/stainless steel weldments/parts
• Receives tacked medium complexity aluminum or steel/stainless steel weldments from senior welders to complete full weld-out and straightening operations
• Cleans and prepares parts for welding by wire brushing, abrasive shot blast, and aqueous or solvent cleaning
• Completes straightening operations on parts and assemblies other than weldments
• Collaborative Welding Robot operation including: loads fixture tooling with subassembly components for tack-up and full weld-out, verifies accurate TCP and calibration, runs pre-programmed welding operations, communicates issues to engineering
• Grinding, straightening, and metal finishing to meet final product finish requirements
• Sets up, qualifies and runs spot welding equipment
• Interprets CAD data, prints and sketches and follows written/verbal instructions
• Sets up and maintains welding equipment
• Follows welding sequences to minimize heat distortion
• Maintains workstation/cell in organized manner and safety standards
• Works in time-critical, dynamic team environment
• Receives and provides cross-training for related tasks
• Recommends and executes process improvements and cycle-time reductions
• Uses precision measuring tools
• Other duties as required
• Physical condition including lifting 50 pounds, standing 10+ hours, PPE requirements

Conocimientos

Welding

Blueprint Reading

Calipers / Micrometers

Team Collaboration

Safety Compliance

Educación

High School Diploma or Trade Cert

Herramientas

Welding Equipment

Welding Robotic System

Measuring Tools

Descripción del empleo

What You Will Be Doing

As a Welder, your responsibilities will include, but are not limited to:

• Layout, fit up and all welding and related fabrication processes on low complexity aluminum and/or steel/stainless steel weldments/parts
• Receives tacked medium complexity aluminum or steel/stainless steel weldments from senior welders to complete full weld-out and straightening operations to tight tolerances and in accordance with manufacturing instructions
• Cleans and prepares parts for welding by wire brushing, abrasive shot blast, and aqueous or solvent cleaning
• Completes straightening operations on parts and assemblies other than weldments
• Collaborative Welding Robot operation including:
• Loads fixture tooling with subassembly components for tack-up and full weld-out
• Verifies accurate Tool Center Point (TCP) and calibration utilizing both laser TCP tool and manual methods prior to production operations
• Runs pre-programmed welding operations verifying parameters are producing good bead profile and fusion in accordance with inspection criteria
• Communicates problems/errors during operation to engineering/supervision for the purpose of corrective action
• Checks/corrects sub-assemblies for flatness/straightness following Cobot operations
• Grinding, straightening, and metal finishing to meet final product finish requirements
• Utilizes jigs, fixtures, table setups, clamps and angle plates precisely as specified by work instructions and/or group leader/supervision direction to produce the correct shapes and dimensions
• Sets up, qualifies and runs spot welding equipment in accordance with specified procedures
• Interprets CAD data, prints and sketches with regard to fabrication and follows written and/or verbal instructions
• Sets up and maintains welding equipment
• Follows welding sequences precisely as specified by work instructions and/or group leader/supervision to minimize heat distortion and straightening requirements
• Maintains workstation/cell in organized manner and in compliance with any applicable safety standards
• Works in time-critical situations in a dynamic, team-oriented environment where programs, setups, and tooling are constantly changing and interacts effectively with associates & management as priorities shift
• Receives and provides cross-training for other tasks related to department functions and procedures
• Recommends and executes changes to achieve process improvements and/or cycle time reductions
• Uses precision measuring tools such as vernier caliper, micrometers, and various welding inspection tools
• Other job-related duties as required by management
• Physical condition allowing:
• Standing, sitting, bending, walking, 10+ hours per day
• Personal protective equipment including steel-toed shoes, safety glasses, hearing protection, and wearing a respirator when required
• Works with others and cross-shift with others on the same work
• Employs various hand tools such as hammers, chisels, squares, and straight edges
• Wash, mask, shot/abrasive blast, and apply metal flame spray to parts and weldments per established manufacturing instructions
• Adheres to safety guidelines and the correct procedures for performing tasks to prevent personal injury or damage to product and/or equipment
  

Standard Job Description

As a Welder, your responsibilities will include, but are not limited to:

• Layout, fit up and all welding and related fabrication processes on low complexity aluminum and/or steel/stainless steel weldments/parts
• Receives tacked medium complexity aluminum or steel/stainless steel weldments from senior welders to complete full weld-out and straightening operations to tight tolerances and in accordance with manufacturing instructions
• Cleans and prepares parts for welding by wire brushing, abrasive shot blast, and aqueous or solvent cleaning
• Completes straightening operations on parts and assemblies other than weldments
• Collaborative Welding Robot operation including:
• Loads fixture tooling with subassembly components for tack-up and full weld-out
• Verifies accurate Tool Center Point (TCP) and calibration utilizing both laser TCP tool and manual methods prior to production operations
• Runs pre-programmed welding operations verifying parameters are producing good bead profile and fusion in accordance with inspection criteria
• Communicates problems/errors during operation to engineering/supervision for the purpose of corrective action
• Checks/corrects sub-assemblies for flatness/straightness following Cobot operations
• Grinding, straightening, and metal finishing to meet final product finish requirements
• Utilizes jigs, fixtures, table setups, clamps and angle plates precisely as specified by work instructions and/or group leader/supervision direction to produce the correct shapes and dimensions
• Sets up, qualifies and runs spot welding equipment in accordance with specified procedures
• Interprets CAD data, prints and sketches with regard to fabrication and follows written and/or verbal instructions
• Sets up and maintains welding equipment
• Follows welding sequences precisely as specified by work instructions and/or group leader/supervision to minimize heat distortion and straightening requirements
• Maintains workstation/cell in organized manner and in compliance with any applicable safety standards
• Works in time-critical situations in a dynamic, team-oriented environment where programs, setups, and tooling are constantly changing and interacts effectively with associates & management as priorities shift
• Receives and provides cross-training for other tasks related to department functions and procedures
• Recommends and executes changes to achieve process improvements and/or cycle time reductions
• Uses precision measuring tools such as vernier caliper, micrometers, and various welding inspection tools
• Other job-related duties as required by management
• Physical condition allowing:
• Lifting 50 pounds
• Standing, sitting, bending, walking, 10+ hours per day
• Personal protective equipment including steel-toed shoes, safety glasses, hearing protection, and wearing a respirator when required
• Works with others and cross-shift with others on the same work
• Employs various hand tools such as hammers, chisels, squares, and straight edges
• Wash, mask, shot/abrasive blast, and apply metal flame spray to parts and weldments per established manufacturing instructions
• Adheres to safety guidelines and the correct procedures for performing tasks to prevent personal injury or damage to product and/or equipment
  

Further Information About This Opportunity

This position is in Archbald. Discover more about our Archbald, Pennsylvania location: https://lmt.co/MFC-JobDescription-Archbald

MUST BE A U.S. CITIZEN – This position is located at a facility that requires special access.

Basic Qualifications

• Ability to qualify and retain qualifications necessary of the welds being performed
• Experience on aluminum or steel/stainless steel parts and assemblies in accordance with supplied instructions
• Ability to work safely with chemicals such as solvents, acidic and alkaline solutions, and aqueous cleaners
• Can read and understand blueprints and sketches with respect to welding symbols and differentiation between thread sizes, pitch, metric and standard threads
• Proficiently uses various hand tools such as hammers, chisels, burr removal, squares, and straight edges and measuring tools such as calipers, micrometers, and scales

Desired Skills

• Quick learner
• Knowledge of Microsoft Office suite of products (Outlook, Word, Excel, PowerPoint)
• Brazing experience
• Flame/plasma cutting experience
• Vocational or trade school certification or equivalent experience
• Wash, shot/abrasive blast, mask, and apply metal flame spray to parts and welded structures per established manufacturing instructions
• Experience in thin and thick section welding

Pay Information

Pay rate for this position is $28.73 - $35.84 per hour.

At Lockheed Martin, we know mission success starts with taking care of our people. Our Total Rewards program is designed to attract top talent, support your well-being, and help you grow—both professionally and personally.

The salary range for this position is as listed on the requisition. Please note that the salary information listed is a general guideline only.

Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market(work location) and business considerations when extending an offer.

Benefits offered: Medical, Dental, Vision, Flexible work arrangements and schedules (e.g., 4x10), 401(k) match, Paid time off, Holidays, Parental Leave, EAP, Flexible Spending Accounts, Education Assistance, Life Insurance, Short-Term Disability, and Long-Term Disability.

• Annual short-term and/or long-term incentive compensation programs may be offered depending on the position. Payments under these annual programs are not guaranteed and can vary from year to year and are tied to a range of performance metrics.
• For (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.