Welder - Hollow Metal / Stainless Steel Doors & Frames

Allegion; Florida; Presencial; USD 28 000 - 39 000; Tempo integral

Vantagens oferecidas por esta oferta de emprego

Health insurance

Paid time off

Retirement plans

Overtime opportunities

Resumo da oferta

Allegion in Florida is seeking a Welder to produce welded assemblies for commercial stainless steel doors and frames using MIG, TIG and LASER processes. The ideal candidate reads shop prints, adheres to tight tolerances, and ensures high-quality welds in a fast-paced hollow metal environment.

Responsibilities include setup, welding in multiple positions, inspection, and basic NDT as required. The role requires physical stamina, safety discipline, and teamwork.

Qualificações

• High school diploma or equivalent preferred.
• 2+ years of welding experience with stainless steel in a manufacturing environment; experience with commercial doors/frames or hollow metal products strongly preferred.
• Proficiency in MIG (GMAW) and/or TIG (GTAW), LASER welding on stainless steel; experience with pulse short‑circuit and spray transfer modes a plus.
• Ability to read and interpret blueprints, weld symbols and dimensional drawings.
• Familiarity with welding procedure specifications (WPS), filler metals for stainless, shielding gases, and methods to control distortion.
• Strong attention to detail and commitment to producing high‑quality welds with good fit and finish.
• Ability to pass shop weld tests and quality inspections.
• Basic math skills and the ability to use measuring tools (tape, calipers, squares, levels).
• Good teamwork and communication skills.
• Ability to lift up to 50 lbs and perform physically demanding tasks (standing, bending, reaching) for extended periods.

Responsabilidades

• Set up, operate and maintain welding equipment (MIG/GMAW, TIG/GTAW, LASER, wire feeders, gas systems) per SOP and welding procedure specifications.
• Perform fit-up, tack welding and final welds on stainless steel/hollow metal doors, frames and related assemblies in flat, vertical, horizontal and overhead positions.
• Weld various joints (butt, fillet, plug/slot) to required strength and appearance standards; control heat input to minimize distortion.
• Interpret drawings, blueprints and weld symbols; perform measurements and verify tolerances during assembly.
• Inspect welds visually and perform basic NDT tasks as required (e.g., dye‑penetrant, visual acceptance criteria) or document for QA inspection.
• Clean, grind and finish welds to meet commercial appearance and corrosion‑resistance requirements; prepare stainless surfaces for passivation/pickling as needed.
• Adhere to and follow welding procedure qualifications (WPS), work instructions and company quality standards.
• Monitor production processes, record output and quality checks, and verify completed operations before moving assemblies to the next cell.
• Maintain a clean, organized and safe workstation; follow PPE and safety protocols (respirators, welding helmets, gloves, ventilation).
• Participate in preventative maintenance for welding equipment and report issues promptly.
• Communicate with supervisors and production team to meet schedules and resolve fabrication issues.
• Perform other duties as assigned.

Conhecimentos

Attention to detail

Teamwork

Math skills

Communication

Formação académica

High school diploma or equivalent

Ferramentas

MIG (GMAW)

TIG (GTAW)

LASER welding

WPS

Descrição da oferta de emprego

Creating Peace of Mind by Pioneering Security and Safety

At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 40 brands, 14,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond.

Additionally, Allegion is proud to be recognized with the 2026 Gallup Exceptional Workplace Award (GEWA) for the third consecutive year, earning distinction in both the employee engagement and strengths categories. This year, Allegion also received Gallup's With Distinction honor - a designation reserved for a select group of organizations that go above and beyond in building exceptional workplace cultures.

Job Description:

The Welder will produce welded assemblies for commercial stainless steel/hollow metal doors and frames using MIG (GMAW), TIG (GTAW), LASER and/or other specified welding processes. The ideal candidate has hands‑on experience with stainless steel, understands heat control to prevent warpage, can interpret shop prints and weld symbols, and works to tight tolerances and established weld procedures.

Key Responsibilities:

• Set up, operate and maintain welding equipment (MIG/GMAW, TIG/GTAW, LASER, wire feeders, gas systems) per SOP and welding procedure specifications.
• Perform fit-up, tack welding and final welds on stainless steel/hollow metal doors, frames and related assemblies in flat, vertical, horizontal and overhead positions.
• Weld various joints (butt, fillet, plug/slot) to required strength and appearance standards; control heat input to minimize distortion.
• Interpret drawings, blueprints and weld symbols; perform measurements and verify tolerances during assembly.
• Inspect welds visually and perform basic NDT tasks as required (e.g., dye‑penetrant, visual acceptance criteria) or document for QA inspection.
• Clean, grind and finish welds to meet commercial appearance and corrosion‑resistance requirements; prepare stainless surfaces for passivation/pickling as needed.
• Adhere to and follow welding procedure qualifications (WPS), work instructions and company quality standards.
• Monitor production processes, record output and quality checks, and verify completed operations before moving assemblies to the next cell.
• Maintain a clean, organized and safe workstation; follow PPE and safety protocols (respirators, welding helmets, gloves, ventilation).
• Participate in preventative maintenance for welding equipment and report issues promptly.
• Communicate with supervisors and production team to meet schedules and resolve fabrication issues.
• Perform other duties as assigned.

Qualifications:

• High school diploma or equivalent preferred.
• 2+ years of welding experience with stainless steel in a manufacturing environment; experience with commercial doors/frames or hollow metal products strongly preferred.
• Proficiency in MIG (GMAW) and/or TIG (GTAW), LASER welding on stainless steel; experience with pulse short‑circuit and spray transfer modes a plus.
• Ability to read and interpret blueprints, weld symbols and dimensional drawings.
• Familiarity with welding procedure specifications (WPS), filler metals for stainless, shielding gases, and methods to control distortion.
• Strong attention to detail and commitment to producing high‑quality welds with good fit and finish.
• Ability to pass shop weld tests and quality inspections.
• Basic math skills and the ability to use measuring tools (tape, calipers, squares, levels).
• Good teamwork and communication skills.
• Ability to lift up to 50 lbs and perform physically demanding tasks (standing, bending, reaching) for extended periods.

Work Environment:

Fast‑paced hollow metal manufacturing facility.

Welding‑related exposures: heat, noise, fumes - appropriate PPE and ventilation provided.

Frequent standing, climbing on platforms and moving around the shop floor.

Schedule:

First shift - Monday-Friday, 8-hour shifts. Occasional daily overtime and weekend work as required to meet production needs.

Compensation and Benefits:

• Competitive hourly wage based on experience and qualifications.
• Overtime opportunities.
• Benefits package, including health insurance, paid time off, and retirement plans.
• Opportunities for growth and advancement within the company.

We Celebrate Who We Are!

Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the