Test Engineer - Electrical

Enovation Controls, LLC

Tulsa (OK)

On-site

USD 70,000 - 110,000

Full time

45 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

401(k) match
Healthcare benefits
Wellness program
Profit-sharing

Job summary

Enovation Controls, LLC is seeking a Test Engineer – Electrical to drive electrical design verification and production validation across ruggedized products for automotive and industrial markets.

You will plan and execute EMC/EMI tests, develop test fixtures, and build automated test sequences using LabVIEW and Python, collaborating with cross-functional teams to ensure regulatory compliance and robust product launches.

Qualifications

  • Bachelor's degree or equivalent in Electrical Engineering or related technical field.
  • 3+ years in electronic hardware testing, electrical design verification or embedded product validation.
  • Hands-on with electrical test instrumentation (oscilloscopes, DMMs, spectrum analyzers, programmable power supplies).
  • Ability to read schematics, PCB layouts, wiring diagrams and troubleshoot to component level.
  • Interpret EMC/EMI test plans and configure lab setups; develop and execute test plans and reports.
  • Experience with test automation using LabVIEW, Python, NI TestStand or similar tools.
  • Strong analytical, documentation, and cross-functional collaboration skills.

Responsibilities

  • Develop electrical DV/PV test plans and procedures based on product requirements and standards.
  • Execute electrical performance and EMI/EMC testing, including power variations and transients.
  • Configure and execute EMC pre‑compliance and compliance testing with appropriate setups and monitoring.
  • Develop test fixtures, wiring harnesses, load boxes, and test interfaces.
  • Maintain and troubleshoot test equipment and instrumentation.
  • Create automated test sequences and stations to improve efficiency and data collection.
  • Collaborate with Hardware, Firmware, Mechanical, Quality, and Manufacturing teams to validate actions.

Skills

Electrical testing
Test planning
LabVIEW
Python
CAN/J1939
EMC/EMI
Schematic reading
Regulatory compliance
Data analysis

Education

Bachelor's degree in Electrical Engineering

Tools

Oscilloscopes
Spectrum analyzers
Digital multimeters
Programmable power supplies
Electronic loads
Data acquisition systems
NI TestStand
LabVIEW

Job description

Enovation Controls is a turnkey technology company that solves complex problems and delivers innovative electronic control and display solutions across diverse markets. People who find their place here tend to stay. Many of our team members have decades of tenure, evidence of a culture where people feel valued and want to build a career.

We’re proud to be recognized by Great Place to Work as one of the Best Workplaces in Manufacturing & Production for seven consecutive years, as well as by Mployer Advisor for our Top U.S. Benefits. This recognition comes directly from employee feedback, not marketing, and reflects a workplace where people feel trusted, supported, and empowered. We live our core values every day in a collaborative, high-performance environment that balances complex technical work with real camaraderie, accessible leadership, and traditions that bring teams together.

Description

The Test Engineer – Electrical, within the Engineering team, is responsible for developing, configuring, and executing electrical design verification (DV) and production validation (PV) testing for ruggedized electronic products, including displays, sensors, and electronic controllers designed for use in automotive, industrial, marine, and other demanding environments.

This role requires a strong foundation in electrical engineering principles, electromagnetic compatibility (EMC/EMI), and regulatory compliance testing. Responsibilities include interpreting product requirements and applicable industry standards, developing test plans and laboratory setups, conducting tests, analyzing results, troubleshooting failures, and documenting findings. Working closely with Hardware, Firmware, Mechanical, Quality, and Manufacturing teams, the Test Engineer verifies that products meet electrical performance, reliability, and regulatory requirements prior to product launch.

Key Responsibilities
  • Test Planning: Develop electrical design verification and validation test plans and procedures based on product requirements, customer specifications, and applicable industry standards.
  • Electrical Testing: Execute electrical performance and immunity testing, including power supply variation, load dump, reverse polarity, electrical fast transient (EFT), surge, and electrostatic discharge (ESD).
  • EMC/EMI Testing: Develop and configure test setups and execute EMC pre-compliance and compliance testing, including conducted and radiated emissions and immunity. Interpret test requirements and configure appropriate equipment, harnesses, grounding, shielding, and functional monitoring to ensure accurate and repeatable results.
  • Test Methods and Fixtures: Develop test procedures, operating conditions, functional monitoring methods, and acceptance criteria. Design and build test fixtures, wiring harnesses, load boxes, and test interfaces.
  • Test Equipment: Evaluate, specify, configure, troubleshoot, and maintain laboratory instrumentation and test equipment to support product development and validation.
  • Test Automation: Develop automated test sequences and stations using LabVIEW, NI TestStand, Python, or similar tools to improve test efficiency, repeatability, and data collection.
  • Test Monitoring and Analysis: Evaluate product performance before, during, and after testing to identify degradation, intermittent failures, resets, communication disruptions, and other abnormal behavior.
  • Embedded and Network Testing: Verify communication interfaces and functionality, including CAN/J1939, RS-485, Ethernet, USB, GMSL, A2B audio, FPD-Link, and analog and digital I/O.
  • Failure Analysis and Reporting: Troubleshoot electrical and EMC/EMI failures, investigate root causes to the board and component level, document findings, and prepare clear, comprehensive test reports.
  • Cross-Functional Collaboration: Track defects, collaborate with Hardware, Firmware, and Mechanical Engineering to validate corrective actions, and support design reviews and engineering change evaluations.
Requirements
  • Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology (EET), or a related technical field.
  • Minimum of 3 years of experience in electronic hardware testing, electrical design verification, or embedded product validation.
  • Hands-on experience with electrical test instrumentation, including oscilloscopes, digital multimeters (DMMs), spectrum analyzers, programmable power supplies, electronic loads, and data acquisition systems.
  • Ability to read and interpret electrical schematics, PCB layouts, wiring diagrams, and product specifications, with experience troubleshooting electrical issues to the component level.
  • Ability to interpret EMC/EMI test plans and applicable standards and independently develop and configure appropriate laboratory test setups, including equipment selection, wiring and harness arrangements, grounding, shielding, and functional monitoring interfaces.
  • Experience developing and executing electrical test plans, test procedures, and technical test reports.
  • Working knowledge of test automation, scripting, or instrument control using LabVIEW, Python, NI TestStand, or similar tools.
  • Strong analytical, troubleshooting, documentation, and organizational skills, with the ability to manage multiple testing programs and priorities.
  • Effective communication and collaboration skills, with the ability to work across Engineering, Manufacturing, Quality, customers, and external test laboratories.
Preferred
  • Experience testing electronic products for automotive, marine, off-highway, or industrial applications.
  • Hands-on experience with automotive EMC/EMI standards, including SAE J1113, ISO 7637, ISO 11452, SAE J1455, and CISPR 25.
  • Experience with European and UK product compliance requirements, including CE marking, the EU EMC Directive, the Radio Equipment Directive (RED), and applicable harmonized standards.
  • Knowledge of North American regulatory requirements, including FCC Part 15 and ISED/ICES.
  • Exposure to supporting product safety certification under applicable IEC/EN standards and the CB Scheme.
  • Working knowledge of CAN and SAE J1939 communication protocols and tools such as Vector CANalyzer or PCAN.
  • Experience developing automated test systems using NI TestStand and LabVIEW; NI CLAD or CLD certification.
  • Knowledge of environmental testing, including thermal, vibration, ingress protection, and HALT/HASS.
  • Familiarity with DFMEA, DVP&R, and APQP/PPAP processes.
  • Background in coordinating testing with external EMC/EMI and regulatory certification laboratories.
Why Enovation Controls

We tackle complex work with high expectations and a learning mindset. Our culture is fun and rewarding, and we consistently rank among the best places to work in manufacturing. We back that culture with solid benefits: a strong 401(k) match, cost-effective healthcare options that meaningfully reduce out-of-pocket costs, wellness support, and profit-sharing that rewards collective success.

We are an equal opportunity employer and value diversity. All employment decisions are based on qualifications, merit, and business need.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Electrical Engineer
Senior Electrical Engineer

Enovation Controls, LLC • Tulsa (OK)

On-site
USD 90,000 - 120,000
401(k) match
Healthcare options
Wellness support
+1
Senior Electrical Engineer
Senior Electrical Engineer

Enovation Controls • Tulsa (OK)

On-site
USD 100,000 - 140,000
401(k) match
Healthcare options
Wellness support
+1
Electrical Engineer
Electrical Engineer

Enovation Controls, LLC • Tulsa (OK)

On-site
USD 90,000 - 120,000
Electrical Engineer
Electrical Engineer

Enovation Controls • Tulsa (OK)

On-site
USD 85,000 - 115,000
401(k) match
Healthcare options
Wellness support
+1
Manufacturing Test Engineer
Manufacturing Test Engineer

EControls • San Antonio (TX)

Hybrid
USD 90,000 - 120,000
Electrical Test Engineer — EMC/EMI & Verification
Electrical Test Engineer — EMC/EMI & Verification

Enovation Controls, LLC • Tulsa (OK)

On-site
USD 70,000 - 110,000
401(k) match
Healthcare benefits
Wellness program
+1
Test Technician
Test Technician

EPC Power Corp • Poway (CA)

On-site
USD 55,000 - 75,000
401(k) with Company Match
Medical, Dental, and Vision Insurance
Life and Disability Insurance
+4
Senior Electrical Test Engineer
Senior Electrical Test Engineer

Saronic Technologies Inc. • United States

On-site
USD 100,000 - 130,000
Test Technician
Test Technician

EPC Power Corp. • Poway (CA)

On-site
USD 48,000 - 64,000
401(k) with Company Match
Medical, Dental, and Vision Insurance
Life and Disability Insurance
+4
Electrical Test Engineer
Electrical Test Engineer

Hitachi Energy Ltd. • Virginia (MN)

On-site
USD 70,000 - 90,000
Opportunities for continuous learning
Career growth and skill development
Collaborative and inclusive environment