Test Engineer

Actalent; Brockton (MA); On-site; USD 90,000 - 110,000; Full time

Benefits offered by this job

401k

PTO

Holiday Pay

Medical

Dental

Vision

Job summary

Actalent is seeking a Test Engineer in Brockton, MA to perform production acceptance testing on electronic assemblies, systems, and finished products. The role combines hands-on electrical troubleshooting with environmental stress screening and detailed documentation to ensure reliability and quality.

The candidate will work with cross-functional teams, develop and maintain test plans, and support continuous improvement initiatives.

Qualifications

• Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology, or equivalent combination of education and experience.
• Demonstrated experience troubleshooting electrical/electronic products in production, manufacturing, development, or lab environments.
• Ability to read and interpret electrical schematics, wiring diagrams, datasheets, and procedures.
• Strong understanding of Ohm’s law, circuits, voltage, current, resistance, and basic analog electronics.

Responsibilities

• Perform production acceptance testing on electronic assemblies, integrated systems, and finished products to verify specifications.
• Conduct power-up verification, configuration checks, and electrical performance testing.
• Perform Environmental Stress Screening including thermal cycling and vibration testing.
• Troubleshoot electrical failures using schematics, wiring diagrams, datasheets, and test results to identify root causes.
• Diagnose issues involving PCBs, wire harnesses, connectors, power distribution, and system wiring.
• Use test equipment to validate performance and isolate faults.
• Conduct basic mixed-signal and RF testing to support product verification.
• Support validation and release of new products by executing test plans and criteria.
• Investigate test failures, determine root causes, and recommend corrective actions.
• Collaborate with design engineering, production, assembly, and quality teams to resolve out-of-spec conditions.
• Document test results and root causes in clear, traceable manner.
• Occasionally travel locally to support testing activities.

Skills

Electrical troubleshooting

Test equipment

RF testing

Environmental stress

Schematic reading

Education

Bachelor’s in Electrical Engineering

Tools

Oscilloscopes

Digital multimeters

Spectrum analyzers

Vector network analyzers

Job description

Job Title: Test EngineerJob Description

The Test Engineer performs production acceptance testing on electronic assemblies, integrated systems, and finished products to ensure they meet performance, quality, and reliability standards. This role combines hands‑on electrical troubleshooting, environmental stress screening, and mixed‑signal/RF testing with detailed documentation, data analysis, and cross‑functional collaboration. The Test Engineer supports new product introduction, continuous improvement initiatives, and provides technical guidance to team members in a manufacturing and laboratory environment.

Responsibilities

• Perform production acceptance testing on electronic assemblies, integrated systems, and finished products to verify compliance with specifications.

• Conduct initial power-up verification, configuration checks, and electrical performance testing on products entering and in production.

• Perform Environmental Stress Screening, including thermal cycling and vibration testing, to identify early-life product failures and reliability issues.

• Troubleshoot electrical failures using schematics, wiring diagrams, datasheets, and test results to identify root causes.

• Diagnose issues involving printed circuit boards, wire harnesses, connectors, power distribution, and system wiring.

• Use oscilloscopes, digital multimeters, spectrum analyzers, vector network analyzers, and other electronic test equipment to validate performance and isolate faults.

• Conduct basic mixed-signal and RF testing as required to support product verification and troubleshooting.

• Support the validation and release of new products entering production by executing test plans and acceptance criteria.

• Investigate test failures, determine root causes, and recommend corrective actions or design improvements to enhance product quality and reliability.

• Partner with design engineering, production, assembly, and quality teams to resolve out-of-specification conditions and drive issue resolution.

• Provide technical feedback on product wiring, board design, manufacturability, quality, and long-term reliability.

• Develop, document, and maintain test plans, procedures, fixtures, and acceptance criteria to standardize testing processes.

• Analyze test data, summarize findings, and communicate results through clear technical reports and documentation.

• Support continuous improvement initiatives focused on product quality, test efficiency, and long-term reliability performance.

• Provide technical guidance, coaching, and support to technicians and less‑experienced team members.

• Document test results, root causes, and recommended corrective actions in a clear and traceable manner.

• Collaborate constructively with design engineers, production employees, and quality personnel to resolve technical issues and improve processes.

• Occasionally travel locally, as needed, to support testing activities or coordination with other teams.

Essential Skills

• Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology, or 5 to 7 years of related experience and/or training; or an equivalent combination of education and experience.

• Demonstrated experience troubleshooting electrical or electronic products in a production, manufacturing, development, or laboratory environment.

• Ability to read and interpret electrical schematics, wiring diagrams, datasheets, and technical procedures.

• Strong understanding of Ohm’s law, series and parallel circuits, voltage, current, resistance, Boolean logic, and basic analog electronics.

• Hands‑on experience using oscilloscopes and digital multimeters in a test or troubleshooting environment.

• Experience performing product verification, acceptance testing, qualification testing, or failure analysis.

• Proven ability to independently investigate unexpected test results and work through problems without relying solely on established instructions.

• Strong communication skills and the ability to work constructively with design engineers, production staff, and quality personnel.

• Ability to clearly document test results, root causes, and recommended corrective actions.

• Working knowledge of Microsoft Office applications, particularly Excel and Word.

• Ability to occasionally lift or move equipment weighing up to 25 pounds.

• Must meet the definition of a U.S. person under International Traffic in Arms Regulations requirements.

Additional Skills & Qualifications

• Experience with Environmental Stress Screening, including thermal cycling and vibration testing, to identify early-life product failures.

• Experience with production acceptance testing and qualification testing of electronic assemblies and systems.

• Proficiency in electrical troubleshooting and failure analysis, including root‑cause investigation and corrective action recommendation.

• Experience operating electronic test equipment such as oscilloscopes, digital multimeters, spectrum analyzers, and vector network analyzers.

• Familiarity with mixed‑signal and RF testing in a production or laboratory setting.

• Knowledge of acceptance testing practices and failure analysis methodologies.

• Understanding of environmental stress testing techniques and their application to product reliability.

• Exposure to AS9100 or similar quality management standards in a manufacturing environment.

• Ability to develop, document, and maintain test plans, procedures, fixtures, and acceptance criteria.

• Experience analyzing test data and preparing technical reports and documentation.

• Interest in mentoring and providing technical guidance to technicians and junior team members.

• Motivation to contribute to continuous improvement efforts in product quality, test efficiency, and long-term reliability.

• Comfort working in production, manufacturing, or lab environments with electronic hardware and test equipment.

Work Environment

The role operates within a manufacturing and laboratory environment focused on electronic assemblies and integrated systems. You will work hands‑on with oscilloscopes, digital multimeters, spectrum analyzers, vector network analyzers, and other electronic test equipment while performing production acceptance testing, environmental stress screening, and failure analysis. The setting involves collaboration with design engineering, production, assembly, and quality teams, with a strong emphasis on product reliability, test rigor, and continuous improvement. The position may require occasionally lifting or moving equipment up to 25 pounds and limited local travel, although travel is not expected to be a regular part of the role. The company offers a stable, long‑term environment with low turnover and significant opportunities for growth as many experienced employees plan to retire over the next several years, creating room for advancement and professional development.

Job Type & Location

This is a Permanent position based out of Brockton, MA.

Pay and Benefits

The pay range for this position is $90000.00 - $110000.00/yr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job‑related factors.

401k PTO Holiday Pay Medical Dental Vision

Workplace Type

This is a fully onsite position in Brockton,MA.

Application Deadline

This position is anticipated to close on Sep 29, 2026.

About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email [e-mail] for other accommodation options.

San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.